541359
10
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
iLive Fixed Format Getting Started Guide 10 AP7141 iss.5
Switch power on
Switch on the MixRack first, then the
Surface by pressing their rear panel power
ON switches.
The system remembers the settings on
power down. These are restored next time
you switch the system on.
Boot up time
MixRack It takes around 15 seconds for
the DSP to start passing audio with the
same settings current at last power down.
You should hear the relays click as they
connect the outputs once the MixRack has
booted.
Surface In just over 1 minute the strip
LCD displays turn on and the Surface is
ready to take control of the mix.
TouchScreen It takes a little longer for
the TouchScreen to complete its boot up
process. In around 2 minutes the screen is
ready and the system fully booted.
Status indicators
Once booted, check that the blue POWER
ON indicators are lit and the various
system status LEDs indicating correctly.
Secure the mains cable in
the clip provided here.
At the MixRack:
Indicates that the
audio is sync locked to
the selected clock
source.
At the Surface:
Indicates that the
surface audio is sync
locked to the MixRack.
The yellow Lnk/Act LEDs for
connected sockets flash at a
steady rate once the link is
established.
If one or more pulse at a slow
rate or the red Err LED remains
lit then check that the cables
are correctly plugged in and are
not faulty.
The STATUS screen
With all the TouchScreen keys turned off and no channel selected the screen displays status information
about the system. A red cross displays in place of the green tick if a problem is detected. A yellow
triangle also displays in the lower toolbar.
Displays the current firmware
version loaded. A red cross
warns if a software error has
been detected. The green tick
should return after viewing the
Event Log in the UTILITY /
Diagnostics screen.
Indicates that the MixRack
is sync locked to the
selected audio clock
source.
A green tick indicates that the
temperature sensed within the rack and
surface is within normal operating range.
Information about the ACE Surface to MixRack audio/control
connection. Status displays error detection over the previous
minute in time, green = none, yellow = few, red = many errors.
Net Bridge indicates correct operation of the Ethernet link over
ACE. Surface Lock indicates that the Surface audio is sync
locked to the MixRack.
If an optional audio network
card is fitted to the MixRack
Port B slot then its status
information is displayed here.
Real time clock. You can change
the time using the UTLITY /
Configuration screen.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Allen-Heath iLive wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info