Bedienungsanleitung Allen-Heath iLive (Seite 18 von 32) (Englisch)

541359

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

iLive Fixed Format Getting Started Guide 18 AP7141 iss.5

Work with the FX

iLive works with FX in a similar way to analogue consoles,

using a send and return path, for example reverb or delay

effect. You can also configure inserted effects such as a

flanger or reverb on a single channel.

Inserted FX Patch the FX unit into a channel or mix

master signal path.

Send / Return FX Use a mix bus or channel Direct

Output to send channel signals to the FX unit. Return the

effect only (wet) signal via a stereo input or IP FX short return

to the main mix. The effect adds to the unaffected (dry)

signal routed directly to the main mix.

Use the MIX key to send to the FX as you would to an Aux.

To view and set up all 8 'RackExtra' FX select the

TouchScreen FX page. Touch one of the 8 virtual rack slots

shown across the top of the screen. Use the Library to load

into an empty position or change an effect type.

The Front Panel view presents the FX parameters. Touch a

parameter box or control and use the encoder to change the

setting.

All FX units feature a Dynamic FX Shaper DFX which can

use the source to Duck or Gate the effect automatically. This

provides dynamic control of the effect, for example to

prevent reverb or echo swamping the signal during loud,

busy passages.

The Back Panel view lets you configure whether the effect is

inserted into a channel or master, or set up as a send/return

path. Choose the source feeding the FX and its output

routing. The source can be patched from a dedicated FX

send bus (if configured in the Mix Config screen), a mono or

stereo Aux, or channel direct output (saves using up mix

buses). The FX can be patched via a mono or stereo input

channel or dedicated FX return 'short' channel which

provides full routing and a PEQ, and is in addition to the 64

processing channels.

Press SEL on either an FX send master or return channel to

open the FX screen if none of the screen keys is already

selected. The channel Processing Block PEQ becomes

available when selecting the return.

You can assign delay FX tap tempo to SoftKeys using the

SURFACE / SoftKey Setup screen. Multiple tap keys may

be assigned as these are linked to specific FX units. Choose

whether to display the tempo on the associated LED.

POL

HPF GATE PEQ COMP LIM

FADER

MUTE

DELAY

MIX

DE-ES

Channel Signal Path

IN OUT

Insert

Dry

Wet

Mono or stereo IP channel

Dedicated stereo FX IP

Patch to

CHANNEL

SENDS

DIRECT OUTPUT

Patch from

Dedicated mono or stereo FX bus

Mono or stereo AUX bus

Channel Direct Output

PEQ

FULL PROCESSING

Full return

Short return

Dry

Wet

MAIN MIX

IN OUT

Tap Tempo

Spatial Modelling Reverberator

Gated Reverb

2 Tap Delay

Automatic Double Tracker

Flanger

Chorus

Symphonic Chorus

Hypabass Sub-harmonic Synthesis

12 Stage Phaser

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath iLive Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info