Bedienungsanleitung Allen-Heath iLive (Seite 22 von 32) (Englisch)

541359

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

iLive Fixed Format Getting Started Guide 22 AP7141 iss.5

Step 8 – Customise your configuration

Once you have familiarised yourself with the operation of the iLive through using a Template Show, you

may wish to take advantage of its unique flexibility by reconfiguring the channel and master strip layout,

DSP mix bus and stereo channel architecture, soft key assignments and more. You can ‘design’ your

own console to suit the way you like to work.

Note - These instructions are intended to get you started. For more information on configuring the iLive

and using its advanced features please refer to the TouchScreen HELP manual and other information

which you can download from the Allen & Heath web site.

To change the FADER STRIP LAYOUT

Any input, mix master, DCA master or Wedge/IEM master

can be assigned to any strip on any layer in any Bank.

Go to the SURFACE SETUP / Strip Setup screen.

Select Single to assign a single strip. Press a channel SEL

key. Assign Channel Type using the drop down menu.

Touch Channel Number and use the encoder to scroll to the

number you want. Press Apply.

Select Block to assign a range of strips. Press the start strip

SEL key. Press the end strip SEL key. Assign the channel

type and start number as above.

Note - The strip SEL keys are used to select which strips to

assign while in this mode. Make sure you exit SETUP mode

to restore normal channel processing selection.

To change the MIX BUS configuration

Press the TouchScreen MIXRACK key to view the current

channel settings and assignments of the 32 mix buses.

MIXRACK / Mixer Config / Mix Config - Use this screen to

change the mix bus configuration.

Configure the 32 mix buses as a combination of mono or

stereo Groups, Auxes, FX sends, Main mix and Matrix.

Configure all or as many buses as you need. Counters keep

a check on the number of buses, mix outputs and FX sends

remaining. Press Apply when finished.

For monitor mixing, you can also choose whether to apply

processing to the engineer's Wedge or IEM monitor master

when using the system as a dedicated Monitor console.

Note - Reconfiguring the channel stereo and mix bus

architecture makes major changes to the system DSP and

overwrites related settings. These changes can take up to 1

minute to process and should be made during system setup

and not during the show.

Note – Changing the DSP architecture resets the mix and

channel parameters. If you want to keep your settings store

these first as a Scene memory. Recall the Scene after

making your changes.

Unused (blank)

Input channel

Mono/St Group

Mono/St Aux

Mono/St FX send

Main

Mono/St Matrix

Input FX return

DCA master

Wedge/IEM master

None - No main mix, eg. Monitor mixer

M - Mono

LR - Stereo

LRSub - 3way mix with separate sub mix

LRM - 3way mix with send to a mono fill

LCR - Conventional LCR panning

LCRSub - LCR with separate sub mix

LCRM - LCR with send to mono fill

LCRplus - LCR with pan and blend control

Radio LRM – For broadcast application

Store settings before changing configuration

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath iLive Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info