Bedienungsanleitung Allen-Heath iLive (Seite 25 von 32) (Englisch)

541359

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

iLive Fixed Format Getting Started Guide 25 AP7141 iss.5

Scene Recall Safes lets you make selected input

channels, mix and DCA masters 'safe' so that their

parameters are not overwritten when a Scene is recalled.

Hold down the SCENE SAFES key and press the strip MIX

keys on channels you want to make safe. The SAFE icon in

the strip LCDs turns on for channels made safe.

Preamp Safes The mic preamp is automatically included

in channels made safe. If you do not want to make the

preamp safe, for example because you have patched it to

more than one input channel, you can change its safe status

using the Preamp screen Safe button.

Show memories

You can archive your configuration as a Show memory.

Show memories overwrite all the settings. These include

all current parameters, system DSP and control

configuration, all 250 Scenes and the user preferences.

Shows are stored on the TouchScreen computer within the

Surface and can be transferred between systems using a

USB key.

To archive your configuration go to the UTILITY /

Configuration / Show Manager screen. Touch the Archive

Show button. Type in a name using the onscreen keypad.

Press Enter to archive the show. This takes a few seconds to

complete.

Use the + button to Expand the list of Shows currently

stored. Template Shows are factory defaults that cannot be

deleted. They give you a quick starting point for mixing with

iLive and can be edited to create your own User shows.

To overwrite an existing User Show highlight it in the list and

touch Archive. The keypad opens with its name displayed.

Either type in a new name to archive it as a different show, or

just press Enter to overwrite the existing show.

To recall a Template, User or USB show go to the UTILITY /

Configuration / Show Manager screen, highlight a Show in

the list, then touch the Recall button. Confirm the action.

Note - Recalling a show overwrites all the system settings

and can change your mix architecture and patching. Make

sure existing settings are archived first if you want to keep

them to use again in the future. Show recall can take up to 3

minutes depending on how much information is stored.

Note - Show recall should only be used when reconfiguring

your system for a different event. This would typically be

done once for the event. Use the Scene memories rather

than Shows to recall settings for different scenes in a theatre

performance, bands at a music festival, day to day setups in

a church, and so on.

Note - For iLive to see the Shows on your USB key they

should be placed in an 'allenheath \ shows' folder in the root

directory of your key. If you have previously archived Shows

to the key using an iLive then this folder should have already

been created.

In situations where you want to import settings from a guest

engineer’s USB key but do not want to overwrite all the

system settings, you can use the USB Scene Transfer

function available in the UTILITY / Configuration screen.

Refer to the TouchScreen HELP manual for further

information.

Scene transfer Filter

User Show list

Factory default Template shows

Archive existing settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath iLive Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info