Bedienungsanleitung Allen-Heath MixWizard WZ3-12 (Seite 31 von 34) (Englisch)

541374

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

16:2 and 12:2 User Guide 31

Aux pre/post insert/EQ

Factory default for

the mono channel pre-fade auxes is pre-insert, pre-

EQ. This is popular with many users mixing monitors

from FOH. It prevents the channel EQ and inserted

compressors affecting the monitor mix. Move the

jumper from A to B to change this to post-insert,

post-EQ if preferred. Note that auxes are always

post-mute.

Direct output source Factory default is pre-

fader. This is common for live recording to

multitrack. The live mix fader movements do not

affect the recording. Move the jumper from C to D to

change to post-fade. Post-fade is appropriate when

using the output as a direct channel effects send.

Channel Aux pre/post settings Factory

default is Aux 1-2 = pre-fade, Aux 3-4 = switched,

Aux 5-6 = post-fade. You can change these settings

for different combinations of pre/post or switched

auxes by repositioning the links. Refer to the system

block diagram to explore the possibilities. Make sure

you set all mono and stereo channels the same.

Before you make your choice, consider whether you

want to use AUX5 or 5/6 for the internal effects

(should be post) and/or AUX6 to feed aux fed subs

(also post). We recommend you only change these

settings if absolutely necessary.

Stereo/Mono aux source The stereo

channels can feed the auxes with a mono sum of

L+R, or be configured so that L feeds the odd

numbered auxes, and R the even. This is preferred

when using odd/even auxes as stereo pairs. Factory

default is the mono setting. Note that you should

also set the ST1 (ST5) stereo/mono jumper to the

same position.

Effects return stereo/mono aux source

The return channel ST1 (5) feeds Auxes 1-4 with a

mono sum of the stereo signal. If you are working

with stereo auxes you can reconfigure this for stereo

with L feeding Auxes 1, 3 and R feeding Auxes 2, 4.

The jumper is found behind the AUX2 send control.

AB source pre or post LR faders The

factory default is that the post-fade LR mix feeds the

AB output. If you prefer the master LR faders not to

affect the AB output then reposition the two option

jumpers in the PRE position. This may be desired if

you are using the AB output to feed a 2-track

recording independent of the house level.

STEREOMONO

JP1

PRE

LRLR

POST

JP2

JP4

JP1

JP3

AB PRE/POST LR FADER

AUX MASTER - ST1(5) MONO/STEREO

LR MASTER - AB SOURCE

ST1(5) AUX SOURCE

AUX AUXDIR1-23-456

PRPOPRPOSWPRSWPRSWPOSWPO

ABCDEFGHIJK

PRE-INSERT/POST-EQ

AUX AUXDIR1-23-456

PRPOPRPOSWPRSWPRSWPOSWPO

ABCDEFGHIJK

SW=SWITCH

PO=POST

PR=PRE

AUX23456

SWPRSWPRSWPRSWPRSWPOSWPO

ABCDEFGHIJK

STEREO CH - AUX PRE/POST FADER

SW=SWITCH

PO=POST

PR=PRE

AUX AUXDIR1-23-456

PRPOPRPOSWPRSWPRSWPOSWPO

ABCDEFGHIJK

MONO CH - AUX PRE/POST FADER

MONO CH - AUX PRE/POST EQ

MONO CH - DIRECT OUT

STEREOMONO

PRE-FADE AUXES

POST-FADE AUXES

CN4

CN5

STEREO CH - MONO/STEREO AUXES

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath MixWizard WZ3-12 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Allen-Heath MixWizard WZ3-12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info