731917
23
Zoom out
Zoom in
Vorherige Seite
1/27
Nächste Seite
10
a halt, so that it uses up all the fuel that is left
in the carburettor.
Wait for the engine to cool down before stor-
ing the machine.
When you wish to start using the machine again,
prepare it as indicated in chapter “2. Preparing
to work”.
6. EXTRAORDINARY MAINTENANCE
This work must be done exclusively by your
Dealer.
All and any operations performed in unauthor-
ised centres or by unqualied persons will totally
invalidate the warranty.
6.1 TUNING MINIMUM SPEED
WARNING! If the cutting device moves
when the engine is running idle, contact your
Dealer to correctly regulate the engine.
6.2 CARBURETTOR ADJUSTMENTS
The carburettor is tuned by the manufacturer to
achieve maximum performance in all situations,
with a minimum emission of toxic gas in compli-
ance with the regulations in force.
In the case of poor performance contact your
Dealer for a check of the carburation and engine.
7. DIAGNOSTICS
What to do when ...
Source of problem Corrective action
1. The engine will not start or will not keep running
Incorrect starting
procedure Follow the instructions
(see chapter 3)
Dirty spark plug
or incorrect distance
between the electrodes
Check the spark plug
(see chapter 5)
Air filter clogged Clean and/or replace
the filter (see chapter 5)
Carburation problems Contact your Dealer
2. The engine starts but is lacking in power
Air filter clogged Clean and/or replace
the filter (see chapter 5)
Carburation problems Contact your Dealer
3. The engine runs irregularly
and lacks in power when revved
Dirty spark plug
or incorrect distance
between the electrodes
Check the spark plug
(see chapter 5)
Carburation problems Contact your Dealer
4. The engine makes too much smoke
Incorrect composition
of the fuel mixture Prepare the fuel mixture
according to the instruc-
tions (see chapter 2)
Carburation problems Contact your Dealer
5. The cutting device must not move
when the engine is running idle
Incorrect carburation
regulation Contact your Dealer
6. The machine starts to vibrate abnormally
Damaged or loose parts Stop the machine and
disconnect the spark plug
cable
Inspect for damage
Check for and tighten any
loose parts
Have all checks, repair
work and replacements
carried out by a specialized
Centre only.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alpina ABR 26 JD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info