110907
5
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
ENGLISH
- 5 -
Never pour water into hot fat.
Allow the unit to cool down before you put it away.
In order to ensure your children‘s safety, please keep all packaging (plastic bags, boxes,
polystyrene etc.) out of their reach.
Before Initial Use
Remove the packaging.
We recommend that you clean the lid and the pan as described under „Cleaning“.
Rub the non-stick surface lightly with edible oil.
Initial Operation
Place the device on a heat-resistant surface.
Please ensure that the temperature regulator (11) is turned to OFF and insert it into the
socket (3) of the thermostat. If the thermostat (7) is not inserted correctly, this may lead to
abnormal heating, of which the consequence may be damage or accidents. You should
therefore ensure that the thermostat is inserted correctly.
Connect the device to a properly installed 230 V, 50 Hz power socket.
Set the temperature control (11) according to what you intend to do:
Adjustment Temperature
adjustment in °C
approx.
Use
MIN-1 Keeping warm
2 over 100°C Fried food, hamburgers
3-4 150°C – 200°C Pancakes, scrambled
eggs, ham, bacon
5 240°C pizza
The device has reached the correct temperature when the control lamp on the thermostat
(7) goes off. During operation the control lamp goes on from time to time to show that the
correct temperature is being maintained.
Using the unit
The Party Pan should be preheated for approximately five minutes. When the control lamp
goes off, the pan is ready for operation.
The cooking time depends on the type and quantity of food that is to be cooked as well as
the degree of cooking. Please base these times on your own experience.
When turning the food that is being cooked, please use wooden or Teflon utensils so as not
to damage the non-stick layer.
When cooking is finished the food may be kept warm by turning the controls to MIN.
CAUTION! The Party Pan is hot during use! ot steam is emitted from the lid.
After Use
To switch the device off, first turn the temperature regulator to OFF and remove the plug from
the socket. Do not remove the thermostat from the device until the device has cooled down,
as the temperature sensor is still very hot after use.
Cleaning
Always pull out the plug from the mains socket before cleaning and wait until the unit has
cooled down.
Do not use any wire brush or other abrasive objects.
Do not use any acidic or abrasive detergents.
Under no circumstances should the device be immersed in water for cleaning.
GB
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alpina SF 6028 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info