Bedienungsanleitung Alpine CDE-114BTi (Seite 7 von 37) (Englisch)

471389

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

5-EN

Flawed CDs, CDs with fingerprints, CDs exposed to extreme

temperatures or sunlight (e.g., left in the car or this unit), CDs

recorded under unstable conditions, CDs on which a recording failed

or a re-recording was attempted, copy-protected CDs which do not

conform to the audio CD industry standard.

• Use discs with MP3 files written in a format compatible with this

unit. For details, refer to “About MP3/WMA/AAC” on page 12.

• ROM data other than audio files contained in a disc will not produce

sound when played back.

Protecting the USB Connection Terminal

• Only a USB Flash Memory devices can be connected to the USB

connection terminal on this unit. Correct performance using other

USB products cannot be guaranteed. A USB hub is not supported.

• Do not connect a USB Memory over 20 mm wide.

Also, avoid connecting USB Memory and Front Aux at the same time.

• If a USB device is inserted in the unit, it projects out and may be a

danger while driving.

Use a commercially available USB extension cable, and connect it in a

safe way.

• Depending on the connected USB Memory device, the unit may not

function or some functions may not be performed.

• The audio file format that can be played back on the unit is MP3/

WMA/AAC.

• Artist/song name, etc., can be displayed, however characters may not

be correctly displayed.

On Handling USB Memory

CAUTION

Alpine accepts no responsibility for lost data, etc., even if data,

etc., is lost while using this product.

• To prevent malfunction or damage, note the following points.

Read the USB Memory Owner’s Manual thoroughly.

Do not touch the terminals by hand or metal.

Do not subject USB Memory to excessive shock.

Do not bend, drop, disassemble, modify or soak in the water.

• Avoid usage or storage in the following locations:

Anywhere in the car exposed to direct sunlight or high temperatures.

Anywhere the possibility of high humidity or corrosive substances is

present.

• Fix the USB Memory in a location where driver operation will not be

hindered.

• USB Memory may not function correctly at high or low temperature.

• The USB Flash Memory supports only 512 or 2,048 bytes per sector.

• Use only certified USB Memory. Please pay attention that even

certified USB Memory, may not function correctly depending on its

type or state.

• USB Memory function is not guaranteed. Use USB Memory

according to the terms of agreement.

• Depending on the settings of the USB Memory type, memory state or

encoding software, the unit may not play back or display properly.

• A file that is copy-protected (copyright protection) cannot be played

back.

• USB Memory may take time to start playback. If there is a particular

file other than audio in the USB Memory, it may take considerable

time before the file is played back or searched.

• The unit can play back “mp3”, “wma” or “m4a” file extensions.

• Do not add the above extensions to a file other than audio data. This

non-audio data will not be recognised. The resulting playback may

contain noise that can damage speakers and/or amplifiers.

• It is recommended to back up important data on a personal

computer.

• Do not remove the USB device while playback is in progress. Change

SOURCE to something other than USB, then remove the USB device

to prevent possible damage to its memory.

• Windows Media and the Windows logo are trademarks, or

registered trademarks of Microsoft Corporation in the United States

and/or other countries.

• iPod is a trademark of Apple Inc., registered in the U.S. and other

countries.

• iPhone is a trademark of Apple Inc.

• “Made for iPod” means that an electronic accessory has been

designed to connect specifically to iPod and has been certified by the

developer to meet Apple performance standards.

• “Works with iPhone” means that an electronic accessory has been

designed to connect specifically to iPhone and has been certified by

the developer to meet Apple performance standards.

• Apple is not responsible for the operation of this device or its

compliance with safety and regulatory standards.

• The BLUETOOTH® word mark and logos are registered trademarks

owned by the Bluetooth SIG, Inc. and any use of such marks by

Alpine Electronics, Inc. is under license.

• “MPEG Layer-3 audio coding technology licensed from Fraunhofer

IIS and Thomson.”

• “Supply of this product only conveys a licence for private,

non-commercial use and does not convey a license nor imply any

right to use this product in any commercial (i.e. revenue-generation)

real time broadcasting (terrestrial, satellite, cable and/or any other

media), broadcasting/streaming via internet, intranets and/or other

networks or in other electronic content distribution systems, such as

pay-audio or audio-on-demand applications. An independent

license for such use is required. For details, please visit http://

www.mp3licensing.com”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-114BTi Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-114BTi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info