Bedienungsanleitung Alpine CDE-135BT (Seite 17 von 46) (Englisch)

536969

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

17-EN

Sound Setting

You can flexibly customize the unit to suit your own preference and

usage. From the AUDIO SETUP menu, Audio Setting can be modified.

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select AUDIO, and then press

ENTER.

BLUETOOTH  GENERAL  AUDIO  DISPLAY  TUNER 

iPod & USB

Turn the Rotary encoder to select the desired sound

setting menu, and then press ENTER.

FAC TORY EQ

*1/*2

 3BAND EQ

*1/*3

 HPF

 SUBWOOFER 

SUBW LPF

 SUBW PHASE

 SUBW SYS

*1 Adjustment cannot be performed when DEFEAT is set to ON.

*2 Any changes made to either FACTORY EQ or 3BAND EQ are

reflected in the others’ settings.

*3 In step 3, three sound adjustment items (Bass, Mid and Treble)

can be selected in 3BAND EQ mode, turn the Rotary encoder

to select the desired item, and then press ENTER to continue

to step 4.

*4 These functions are inoperable when Subwoofer is set to OFF.

Turn the Rotary encoder to change the setting, and then

press ENTER.

(e.g. Select SUBWOOFER ON or SUBWOOFER OFF)

Press and hold AUDIOSETUP for at least 2 seconds to

return to normal mode.

Notes

• Pressing  returns to the previous Sound menu mode.

• If no operation is performed for 60 seconds, Sound menu mode is

cancelled.

10 typical equalizer settings are preset at the factory for a variety of

musical source material. USER settings are created in the 3BAND EQ

mode.

USER  FLAT (Initial setting) POPS  ROCK  NEWS  JAZZ

 ELEC DANCE  HIP HOP  EASY LIS  COUNTRY 

CLASSICAL

You can modify the Equalizer settings to create a response curve more

appealing to your personal taste. The setting of Bass, Mid and Treble can

be adjusted in this mode.

Setting the Bass Control

After selecting BASS from the 3BAND EQ adjustment

mode, turn the Rotary encoder to select the desired Bass

setting item, and then press ENTER.

WIDTH (Q)  CENTER FRQ  LEVEL

Turn the Rotary encoder to select the desired setting

value, and then press ENTER.

Press  to return to the previous step.

 Setting the Bass Bandwidth (WIDTH (Q))

Turn the Rotary encoder to select the desired bass

bandwidth.

WIDE 0.50  MEDIUM 1.00  MEDIUM 1.50 (Initial setting) 

NARROW 2.00

Changes the boosted bass bandwidth to wide or narrow. A wider setting

will boost a wide range of frequencies above and below the centre

frequency. A narrower setting will boost only frequencies near the

centre frequency.

 Setting the Bass Centre Frequency (CENTER FRQ)

Turn the Rotary encoder to select the desired bass centre

frequency.

60 (Hz)  80 (Hz)  100 (Hz) (Initial setting)  120 (Hz)

Emphasises the displayed bass frequency ranges.

 Setting the Bass Level

Turn the Rotary encoder to select the desired bass level

(-7~+7)

You can emphasise or weaken the bass level.

* The adjustment can also be made by pressing AUDIO. Refer to

“Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/

Balance (Between Left and Right)/Fader (Between Front and

Rear)/AUX Mix Level/Loudness/Defeat” on page 16.

Setting the Mid Control

After selecting MID from the 3BAND EQ adjustment mode,

turn the Rotary encoder to select the desired Mediant

setting item, and then press ENTER.

WIDTH (Q)  CENTER FRQ  LEVEL

Turn the Rotary encoder to select the desired setting

value, and then press ENTER.

Press  to return to the previous step.

 Setting the Mid Bandwidth (WIDTH (Q))

Turn the Rotary encoder to select the desired Mid

bandwidth.

WIDE 0.75  MEDIUM 1.00  MEDIUM 1.25  NARROW 1.50

(Initial setting)

 Setting the Mid Centre Frequency (CENTER FRQ)

Turn the Rotary encoder to select the desired Mid centre

frequency.

500 (Hz)  1.0k (Hz) (Initial setting)  1.5k (Hz)  2.5k (Hz)

 Setting the Mid Level

Turn the Rotary encoder to select the desired Mid level (-7

~ +7)

You can emphasise or weaken the Mid level.

* The adjustment can also be made by pressing AUDIO. Refer to

“Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/

Balance (Between Left and Right)/Fader (Between Front and

Rear)/AUX Mix Level/Loudness/Defeat” on page 16.

Use steps 1 to 5 to select the category you wish to modify. For

details on how to change each setting, see the following

sections below.

Equalizer Presets (FACTORY EQ)

Adjusting the Parametric Equalizer Curve

(3BAND EQ)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-135BT Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-135BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info