Bedienungsanleitung Alpine CDE-135BT (Seite 34 von 46) (Englisch)

536969

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

34-EN

For example:

Searching by Artist name

The following example explains how an ARTIST search is performed.

Another search mode can be used for the same operation, although the

hierarchy differs.

Press ENTER to activate the search selection mode.

The “” indicator lights up.

Turn the Rotary encoder to select the ARTIST search

mode, and then press ENTER.

PLAYLIST  ARTIST  ALBUM  SONG  PODCAST  GENRE

 COMPOSER  AUDIOBOOK  PLAYLIST

Turn the Rotary encoder to select the desired Artist, and

then press ENTER.

Turn the Rotary encoder to select the desired Album, and

then press ENTER.

Turn the Rotary encoder to select the desired Song, and

then press ENTER.

Notes

• This function is unavailable when iPod is selected in “Setting the iPod

Control” (refer to “Setting the iPod Control” on page 33).

• After pressing and holding ENTER for at least 2 seconds while in

each hierarchy (except SONG and AUDIOBOOK hierarchy), all songs

of the selected hierarchy are played back.

• After selecting [ALL] in the search mode with“

”, press and hold

ENTER for at least 2 seconds to play back all songs in the iPod/

iPhone or selected search mode.

• While in the search mode, if you press and hold  for 2 seconds, or no

operation is performed for 60 seconds, the search mode is cancelled.

• In the search mode, pressing  will return to the previous mode.

• When search is made during M.I.X. play, the M.I.X. play mode will be

cancelled.

• When search is made during song downloading on iPhone,

“UPDATING” will be displayed for a few second and the search mode

will be cancelled.

• “NO SONG” will be displayed if there are no songs in the selected

playlist in the PLAYLIST search mode.

• “NO PODCAST” will be displayed if there is no podcast data in the

iPod/iPhone in the PODCAST search mode.

• “NOAUDIOBOK” will be displayed if there is no audiobook data in the

iPod/iPhone in AUDIOBOOK search mode.

• If “iPod name” stored in the iPod/iPhone is selected in the desired

Playlist search mode, and ENTER is pressed, you can search for all

songs in the iPod/iPhone. Also, if you press and hold ENTER for at

least 2 seconds, all songs in the iPod/iPhone are played back.

• Depending on the iPod/iPhone, podcast search is not supported.

• If any one of the preset buttons (1 through 6) is pressed in the

search mode, a search can be made quickly by skipping to the specified

location. For details, refer to “Direct Search Function” on page 34.

• During search mode, a search can be made quickly by Alphabet search

function to find the desired artist or song, etc. For details, refer to

“Alphabet Search Function” on page 34.

Direct Search Function

The unit’s direct search function can be used to search for an album,

song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/

PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can

quickly target any song.

In the search mode, press any one of the preset buttons (1

through 6) to quickly skip over a designated percent of

your song content.

Song search example:

If there are 100 songs in your iPod/iPhone, they are divided into 6

groups using percentages (shown below). These groups are

assigned to the preset buttons (1 through 6).

Example 1:

Suppose the song you are searching for is located at around the

middle (50%) of your library: press button 4 to jump to the 50th

song and turn the Rotary encoder to find the desired song.

Example 2:

Suppose the song you are searching for is located near the end

(83%) of your library: press button 6 to jump to the 83rd song

and turn the Rotary encoder to find the desired song.

Note

• This function is inactive during Alphabet Search mode.

Select Playlist/Artist/Album/Genre/

Composer/Episode

Playlist/Artist/Album/Genre/Composer/Episode can be easily changed.

For example, if you listen to a song from a selected album, the album can

be changed.

Press  or  to select the desired Playlist/Artist/Album/

Genre/Composer/Episode.

Notes

• If the song search mode was used to select a song, this function is

inactive.

• If an album is selected during an artist search, other albums by that

artist are searchable.

• This function is inactive during shuffle (M.I.X.) playback.

Alphabet Search Function

Quickly find an artist, album, etc. by the first letter in its title or name.

During search mode, press  or  to activate Alphabet

Search function.

Turn the Rotary encoder or press  or  to select the

desired initial letter (e.g. select “M”), and then press

ENTER.

A list which begins with the selected initial letter is searched.

Composer

Album

Song —

Audiobook———

Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4

All 100 songs (100%)

0% 17% 33% 50% 67% 83%

Preset

buttons

123456

Songs

1st

song

17th

song

33rd

song

50th

song

67th

song

83rd

song

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine CDE-135BT Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine CDE-135BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info