Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
Designed by ALPINE Japan
68-24567Z13-A
EN
DE
FR
ES
IT
SE
NL
RU
PL
RR
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN
AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/
ТОЛЬКО ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE
OWNER’S MANUAL
Please read before using this equipment.
ANVÄNDARHANDLEDNING
Innan du annder utrustningen bör du läsa
igenom denna användarhandledning.
BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
GEBRUIKERSHANDLEIDING
Lees deze aanwijzingen aandachtig alvorens dit
toestel te gebruiken.
MODE D’EMPLOI
Veuillez lire avant dutiliser cet appareil.
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Прочтите настоящее руководство перед
началом использования оборудования.
MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
INSTRUKCJA OBSŁUGI
Prosimy zapoznać siç z tą instrukcją przed
przystąpieniem do użytkowania urządzenia.
ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
ALPINE ELECTRONICS MARKETING, INC.
1-7, Yukigaya-Otsukamachi, Ota-ku,
Tokyo 145-0067, JAPAN
Phone: 03-5499-4531
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
CD/USB RECEIVER
CDE-182R/CDE-181R
CDE-181RR/CDE-181RM
CDE-180R/CDE-180RR/CDE-180RM
DIGITAL MEDIA RECEIVER
UTE-81R
(CDE-182R/CDE-181Series only)
(CDE-181/CDE-180Series only)
(CDE-182R only)
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN
    AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/
    ТОЛЬКО ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE

    EN
    R

    CD/USB RECEIVER

    CDE-182R/CDE-181R
    CDE-181RR/CDE-181RM
    CDE-180R/CDE-180RR/CDE-180RM

    DE

    FR

    DIGITAL MEDIA RECEIVER

    UTE-81R

    ES

    (CDE-182R only)

    (CDE-181/CDE-180Series only)

    (CDE-182R/CDE-181Series only)

    • OWNER’S MANUAL
    Please read before using this equipment.
    • BEDIENUNGSANLEITUNG
    Lesen Sie diese Bedienungsanleitung bitte vor
    Gebrauch des Gerätes.
    • MODE D’EMPLOI
    Veuillez lire avant d’utiliser cet appareil.
    • MANUAL DE OPERACIÓN
    Léalo antes de utilizar este equipo.

    • ANVÄNDARHANDLEDNING
    Innan du använder utrustningen bör du läsa
    igenom denna användarhandledning.
    • GEBRUIKERSHANDLEIDING
    Lees deze aanwijzingen aandachtig alvorens dit
    toestel te gebruiken.
    • РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
    Прочтите настоящее руководство перед
    началом использования оборудования.
    • INSTRUKCJA OBSŁUGI
    Prosimy zapoznać siç z tą instrukcją przed
    przystąpieniem do użytkowania urządzenia.

    • ISTRUZIONI PER L’USO
    Si prega di leggere prima di utilizzare il
    attrezzatura.
    ALPINE ELECTRONICS MARKETING, INC.
    1-7, Yukigaya-Otsukamachi, Ota-ku,
    Tokyo 145-0067, JAPAN
    Phone: 03-5499-4531
    ALPINE ELECTRONICS OF AMERICA, INC.
    19145 Gramercy Place, Torrance,
    California 90501, U.S.A.
    Phone 1-800-ALPINE-1 (1-800-257-4631)
    ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
    161-165 Princes Highway, Hallam
    Victoria 3803, Australia
    Phone 03-8787-1200

    ALPINE ELECTRONICS GmbH
    Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
    Phone 089-32 42 640
    ALPINE ELECTRONICS OF U.K. LTD.
    Alpine House
    Fletchamstead Highway, Coventry CV4 9TW, U.K.
    Phone 0870-33 33 763

    IT

    SE

    NL

    RU

    PL
    ALPINE ITALIA S.p.A.
    Viale C. Colombo 8, 20090 Trezzano
    Sul Naviglio (MI), Italy
    Phone 02-484781
    ALPINE ELECTRONICS DE ESPAÑA, S.A.
    Portal de Gamarra 36, Pabellón, 32
    01013 Vitoria (Alava)-APDO 133, Spain
    Phone 945-283588

    ALPINE ELECTRONICS FRANCE S.A.R.L.
    (RCS PONTOISE B 338 101 280)
    98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
    B.P. 50016, 95945 Roissy Charles de Gaulle
    Cedex, France
    Phone 01-48638989
    Designed by ALPINE Japan
    68-24567Z13-A



  • Page 2



  • Page 3

    Contents
    Operating Instructions
    WARNING
    WARNING ....................................................... 5
    CAUTION ........................................................ 5
    PRECAUTIONS ............................................... 5

    Getting Started
    Accessory List ...............................................................8
    Turning Power On and Off.......................................8
    Demonstration Function..........................................8
    Source Selection..........................................................8
    Detaching and Attaching the Front Panel .........8
    Detaching ..................................................................8
    Attaching ...................................................................8
    Adjusting Volume .......................................................9

    Radio
    Listening to Radio.......................................................9
    Presetting Stations Manually..................................9
    Presetting Stations Automatically...................... 10
    Tuning to Preset Stations ...................................... 10
    Frequency Search Function.................................. 10

    RDS
    Turning AF (Alternative Frequencies)
    ON/OFF ........................................................................ 10
    Receiving RDS Regional (Local) Stations ......... 11
    PI SEEK Setting .......................................................... 11
    Receiving Traffic Information............................... 11
    Receiving Traffic Information While Playing
    USB Audio or Radio ................................................. 11
    Displaying Radio Text ............................................. 11

    CD/MP3/WMA/AAC (CDE-182R/
    CDE-181 Series/CDE-180 Series only)
    Playback ...................................................................... 12
    Repeat and Random Play ..................................... 12
    Searching for CD Text
    (concerning Audio CD)........................................... 12
    Folder/File Name Search
    (concerning MP3/WMA/AAC).............................. 13
    Folder Name Search mode ............................... 13
    File Name Search mode..................................... 13
    Search Position Memory ....................................... 13
    About MP3/WMA/AAC........................................... 13
    Terminology........................................................... 14

    ENGLISH
    Sound Setting
    Adjusting Subwoofer Level/Bass Level/
    Mid Level/Treble Level/Balance (Between Left
    and Right)/Fader (Between Front and Rear)/
    Loudness/Defeat.......................................................15
    Audio Setup................................................................15
    Equalizer Presets ...................................................16
    Setting BASS ENGINE SQ ON/OFF ..................16
    Turning Loudness On/Off ..................................16
    Adjusting the Parametric Equalizer Curve
    (3BAND EQ).............................................................16
    Setting the Control ....................................................16

    Setting the Source Volume Level....................16
    Turning Subwoofer ON/OFF.............................16
    Adjusting the Low Pass Filter ...........................17
    Setting the Subwoofer Phase...........................17
    Setting the Subwoofer System ........................17
    External Device......................................................17
    Connecting to an External Amplifier
    (POWER IC)....................................................................17

    BASS ENGINE SQ Function
    Setting BASS ENGINE SQ ON/OFF.......................18
    Adjusting BASS ENGINE SQ Level .......................18

    Other Functions
    Displaying the Text...................................................19
    About “Text” ...........................................................19
    Using the Front AUX Input Terminal..................19
    Option Menu Setting ..............................................20

    SETUP
    Setting ..........................................................................20
    General Setting .....................................................21
    Setting the Menu Language ..................................21
    Setting the AUX SETUP mode................................21
    Setting the AUX NAME mode ................................21
    Playing MP3/WMA/AAC Data (PLAY MODE)
    (CDE-182R/CDE-181 Series/CDE-180 Series
    only) ................................................................................21
    Setting the Demonstration mode........................21

    Display Setting ......................................................21
    Dimmer Control ..........................................................21
    Scroll Setting (TEXTSCROLL) ..................................21

    iPod/iPhone Setting ............................................22
    iPod/iPhone Search Mode Setting.......................22

    USB Memory (optional)
    Playing MP3/WMA/AAC Files from USB Memory
    (optional) .....................................................................22
    About MP3/WMA/AAC File of USB Memory ...22

    3-EN



  • Page 4

    Contents
    iPod/iPhone (optional)
    (CDE-182R/CDE-181 Series only)
    Connecting an iPod/iPhone................................. 23
    Setting the iPod Control........................................ 23
    Playback ...................................................................... 23
    Searching for a desired Song............................... 24
    Alphabet search function ..................................... 24
    Direct Search Function........................................... 25
    Select Playlist/Artist/Album/Genre/
    Composer ................................................................... 25
    Random Play Shuffle (M.I.X.) ................................ 25
    Repeat Play................................................................. 25

    Information
    In Case of Difficulty.................................................. 26
    Basic.......................................................................... 26
    Radio......................................................................... 26
    CD (CDE-182R/CDE-181 Series/
    CDE-180 Series only)........................................... 26
    MP3/WMA/AAC .................................................... 26
    Audio ........................................................................ 26
    iPod (CDE-182R/CDE-181 Series only).......... 26
    Indication for CD Player (CDE-182R/
    CDE-181 Series/CDE-180 Series only)........... 27
    Indication for USB Memory .............................. 27
    Indication for iPod Mode
    (CDE-182R/CDE-181 Series only).................... 27
    Specifications ............................................................ 29

    Installation and Connections
    WARNING ..................................................... 30
    CAUTION ...................................................... 30
    PRECAUTIONS ............................................. 30
    Installation.................................................................. 31
    Removal................................................................... 31
    Connections............................................................... 33

    Notes
    • The description related with Disc on this Owner’s Manual is only
    applicable to CDE-182R/CDE-181 Series/CDE-180 Series.
    • The illustrations on this Owner’s Manual use CDE-182R as an
    example.

    4-EN

    ENGLISH



  • Page 5

    Operating Instructions
    WARNING
    WARNING
    This symbol means important instructions. Failure
    to heed them can result in serious injury or death.

    HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
    Failure to do so may cause personal injury or damage to the
    product. Return it to your authorized Alpine dealer or the nearest
    Alpine Service Centre for repairing.

    PRECAUTIONS
    Product Cleaning

    DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY
    FROM SAFELY DRIVING YOUR VEHICLE.
    Any function that requires your prolonged attention should only be
    performed after coming to a complete stop. Always stop the vehicle
    in a safe location before performing these functions. Failure to do so
    may result in an accident.

    KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE
    NOISES WHILE DRIVING.
    Excessive volume levels that obscure sounds such as emergency
    vehicle sirens or road warning signals (train crossings, etc.) can be
    dangerous and may result in an accident. LISTENING AT LOUD
    VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
    DAMAGE.

    DO NOT DISASSEMBLE OR ALTER.

    Use a soft dry cloth for periodic cleaning of the product. For more
    severe stains, please dampen the cloth with water only. Anything
    else has the chance of dissolving the paint or damaging the plastic.

    Temperature
    Be sure the temperature inside the vehicle is between +60°C
    (+140°F) and −10°C (+14°F) before turning your unit on.

    Moisture Condensation
    You may notice the CD playback sound wavering due to
    condensation. If this happens, remove the disc from the player and
    wait about an hour for the moisture to evaporate.

    Damaged Disc
    Do not attempt to play cracked, warped, or damaged discs. Playing
    a bad disc could severely damage the playback mechanism.

    Doing so may result in an accident, fire or electric shock.

    Maintenance

    USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

    If you have problems, do not attempt to repair the unit yourself.
    Return it to your Alpine dealer or the nearest Alpine Service Station
    for servicing.

    (Check with your dealer if you are not sure.) Failure to do so may
    result in fire, etc.

    KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF
    CHILDREN.
    Swallowing them may result in serious injury. If swallowed, consult
    a physician immediately.

    Never Attempt the Following
    Do not grip or pull out the disc while it is being pulled back into the
    player by the automatic reloading mechanism.
    Do not attempt to insert a disc into the unit when the unit power is
    off.

    USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.
    Failure to do so may result in fire or electric shock.

    DO NOT BLOCK VENTS OR RADIATOR PANELS.
    Doing so may cause heat to build up inside and may result in fire.

    USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
    Use for other than its designed application may result in fire,
    electric shock or other injury.

    DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION
    SLOTS OR GAPS.
    Doing so may result in personal injury or damage to the product.

    CAUTION

    Inserting Discs
    Your player accepts only one disc at a time for playback. Do not
    attempt to load more than one disc.
    Make sure the label side is facing up when you insert the disc.
    “ERROR” will be displayed on your player if you insert a disc
    incorrectly.
    Playing a disc while driving on a very bumpy road may result in
    skips, but this will not scratch the disc or damage the player.

    This symbol means important instructions. Failure
    to heed them can result in injury or material
    property damage.

    5-EN



  • Page 6

    New Discs

    Disc Cleaning

    To prevent the CD from jamming, “ERROR” is displayed if discs
    with irregular surfaces are inserted or if discs are inserted
    incorrectly. When a new disc is ejected immediately after initial
    loading, use your finger to feel around the inside of the centre hole
    and outside edge of the disc. If you feel any small bumps or
    irregularities, this could inhibit proper loading of the disc. To
    remove the bumps, rub the inside edge of the hole and outside edge
    of the disc with a ballpoint pen or other such instrument, and then
    insert the disc again.

    Fingerprints, dust, or soil on the surface of the disc could cause the
    CD player to skip. For routine cleaning, wipe the playing surface
    with a clean, soft cloth from the centre of the disc to the outer edge.
    If the surface is heavily soiled, dampen a clean, soft cloth in a
    solution of mild neutral detergent before cleaning the disc.

    Centre Hole

    Centre Hole
    New Disc

    Disc Accessories
    Bumps

    Outside
    (Bumps)

    Irregular Shaped Discs
    Be sure to use round discs only for this unit and never use any
    special shaped discs.
    Use of special shape discs may cause damage to the mechanism.

    There are various accessories available on the market for protecting
    the disc surface and improving sound quality. However, most of
    them will influence the thickness and/or diameter of the disc. Using
    such accessories can cause the disc to be out of standard
    specifications and may create operational problems. We
    recommend not using these accessories on discs played in Alpine
    CD players.

    Transparent Sheet

    Disc Stabilizer

    Installation Location

    On handling Compact Discs (CD/CD-R/CD-RW)

    Make sure this unit will not be installed in a location subjected to:













    Direct sun and heat
    High humidity and water
    Excessive dust
    Excessive vibrations

    Correct Handling
    Do not drop the disc while handling. Hold the disc so you will not
    leave fingerprints on the surface. Do not affix tape, paper, or
    gummed labels to the disc. Do not write on the disc.
    CORRECT

    Do not touch the surface.
    Do not expose the disc to direct sunlight.
    Do not affix stickers or labels.
    Clean the disc when it is dusty.
    Make sure that there are no bumps around the disc.
    Do not use commercially available disc accessories.

    Do not leave the disc in the car or the unit for a long time. Never
    expose the disc to direct sunlight. Heat and humidity may damage
    the CD and you may not be able to play it again.
    To customers using CD-R/CD-RW
    • If a CD-R/CD-RW cannot be played back, make sure the last
    recording session was closed (finalised).
    • Finalise the CD-R/CD-RW if necessary, and attempt playback again.

    About media that can be played
    INCORRECT

    CORRECT

    Use only compact discs with the label side showing the CD logo
    marks below.

    If you use unspecified compact discs, correct performance cannot
    be guaranteed.
    You can play CD-Rs (CD-Recordables)/CD-RWs
    (CD-ReWritables) which have been recorded only on audio devices.
    You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC
    formatted audio files.
    • Some of the following CDs may not play on this unit:
    Flawed CDs, CDs with fingerprints, CDs exposed to extreme
    temperatures or sunlight (e.g., left in the car or this unit), CDs
    recorded under unstable conditions, CDs on which a recording failed
    or a re-recording was attempted, copy-protected CDs which do not
    conform to the audio CD industry standard.

    6-EN



  • Page 7

    • Use discs with compressed audio files written in a format compatible
    with this unit. For details, refer to “About MP3/WMA/AAC” on
    page 13.
    • ROM data other than audio files contained in a disc will not produce
    sound when played back.

    Protecting the USB Port
    • Only USB Flash Memory devices and iPod/iPhone can be connected
    to the USB port on this unit. Correct performance using other USB
    products cannot be guaranteed. A USB hub is not supported.
    • Depending on the shape or size of a USB memory device, it may not
    be connected to the USB terminal of this unit-a USB extension (sold
    separately) is recommended for this connection.
    Also, avoid connecting USB memory and Front Aux at the same time.
    • If a USB device is inserted in the unit, it projects out and may be a
    danger while driving.
    Use a commercially available USB extension cable, and connect it in a
    safe way.
    • Depending on the connected USB Memory device, the unit may not
    function or some functions may not be performed.
    • The audio file format that can be played back on the unit is MP3/
    WMA/AAC.
    • Artist/song name, etc., can be displayed, however some characters
    may not be correctly displayed.

    On Handling USB Memory

    CAUTION
    Alpine accepts no responsibility for lost data, etc., even if data,
    etc., is lost while using this product.
    • To prevent malfunction or damage, note the following points.
    Read the USB Memory Owner’s Manual thoroughly.
    Do not touch the terminals by hand or metal.
    Do not subject USB Memory to excessive shock.
    Do not bend, drop, disassemble, modify or soak in the water.
    • Fix the USB Memory in a location where driver operation will not be
    hindered.
    • USB Memory may not function correctly at high or low temperature.
    • Use only certified USB Memory. Please pay attention that even
    certified USB Memory, may not function correctly depending on its
    type or state.
    • USB Memory function is not guaranteed. Use USB Memory
    according to the terms of agreement.
    • Depending on the settings of the USB Memory type, memory state or
    encoding software, the unit may not play back or display properly.
    • A file that is copy-protected (copyright protection) cannot be played
    back.
    • USB Memory may take time to start playback. If there is a particular
    file other than audio in the USB Memory, it may take considerable
    time before the file is played back or searched.
    • The unit can play back “mp3”, “wma” or “m4a” file extensions.
    • Do not add the above extensions to a file other than audio data. This
    non-audio data will not be recognised. The resulting playback may
    contain noise that can damage speakers and/or amplifiers.
    • It is recommended to back up important data on a personal
    computer.
    • Do not remove the USB device while playback is in progress. Change
    SOURCE to something other than USB, and then remove the USB
    device to prevent possible damage to its memory.

    7-EN



  • Page 8

    Getting Started

    Source Selection
    Press SOURCE to change the source.

    SOURCE/

    Rotary encoder
     /ENTER

    TUNER  DISC*1  USB AUDIO/iPod*2  AUXILIARY*3  TUNER

    *1 Only for CDE-182R/CDE-181 Series/CDE-180 Series.
    *2 Only for CDE-182R/CDE-181 Series and when the iPod/iPhone
    is connected.
    *3 Only when AUX SETUP is set to ON. Refer to “Setting the AUX
    SETUP mode” on page 21.

    Detaching and Attaching the Front Panel
    e

    Detaching

    Accessory List










    Head Unit ..................................................................................1
    Power Cable ..............................................................................1
    Mounting Sleeve ......................................................................1
    Carrying Case
    (CDE-182R/CDE-181 Series/CDE-180 Series only) .................1
    Bracket Key ...............................................................................2
    Rubber Cap ...............................................................................1
    Hex Bolt.....................................................................................1
    Screw (M5 × 8) ..........................................................................4
    Owner’s Manual..................................................................1 set

    Turning Power On and Off
    Press SOURCE to turn on the unit.
    Note
    • The unit can be turned on by pressing any other button except  and
    e (Release).

    Notes
    • The front panel may become hot in normal usage (especially the
    connector terminals on the back of the front panel). This is not a
    malfunction.
    • To protect the front panel, place it in the supplied carrying case
    (CDE-182R/CDE-181 Series/CDE-180 Series only).
    • When detaching the front panel, do not apply excessive force as it may
    result in malfunction.

    Attaching

    Press and hold SOURCE for at least 2 seconds to turn
    off the unit.
    Note
    • The first time power is turned on, the volume will start from level 12.

    Demonstration Function
    This unit has a demonstration feature for display. When Demo mode is
    set to ON (initial setting), the unit starts the demonstration if there is no
    operation for 30 seconds.
    When installing this unit in a car for the first time, the DEMO OFF
    screen will be displayed for 30 seconds after turning on the unit.

    Press ENTER within 30 seconds to turn off the
    Demonstration mode*.
    Otherwise, the Demo mode remains ON and the unit starts the
    demonstration if there is no operation for 30 seconds.
    * The operation is the same as setting DEMO MODE to OFF in the
    Setup menu. However, if the unit is disconnected from the vehicle's
    battery, DEMO MODE will be switched to ON automatically
    when the unit is used next time. If you want to completely close the
    Demo mode, set DEMO MODE to QUITE OFF. For details,
    please refer to “Setting the Demonstration mode” on page 21.

    8-EN

    Notes
    • Before attaching the front panel, make sure that there is no dirt or dust
    on the connector terminals and no foreign object between the front
    panel and the main unit.
    • Attach the front panel carefully, holding the sides of the front panel to
    avoid pushing buttons by mistake.



  • Page 9

    Adjusting Volume

    Radio

    Turn the Rotary encoder until the desired sound is
    obtained.

    SOURCE/

    Rotary encoder

     /ENTER

    Controllable with Remote Control (CDE-182R/CDE-181 Series/
    CDE-180 Series only)
    This unit can be controlled with an optional Alpine remote control.
    For details, consult your Alpine dealer. Point the optional remote
    control transmitter at the remote-control sensor.

    Remote control sensor

    BAND


    TUNE/A.ME

    Preset buttons
    (1 through 6)

    Listening to Radio
    Connectable to Remote Control Interface Box
    (CDE-182R/CDE-181 Series/CDE-180 Series only)
    With an optional Alpine Steering Wheel Remote Control Interface
    Box (not included), this unit is controllable from the vehicles
    steering wheel controls. For details, contact your Alpine dealer.

    1
    2

    Press SOURCE to select TUNER mode.
    Press BAND repeatedly until the desired radio band is
    displayed.
    F1 (FM1)  F2 (FM2)  F3 (FM3)  MW  LW  F1 (FM1)

    3

    Press TUNEA.ME to select the tuning mode.
    SEEK DX (Distance mode)  SEEK LOCAL (Local mode) 
    MANUAL (Manual mode)  SEEK DX
    Distance mode (Initial setting):
    Both strong and weak stations will be automatically tuned in
    (Automatic Seek Tuning). The “
    ” indicator lights up.
    Local mode:
    Only strong stations will be automatically tuned in (Automatic
    Seek Tuning).
    Manual mode:
    The frequency is manually tuned in steps (Manual tuning).

    4

    Press  or  to tune in the desired station.
    In Manual mode, holding down  or  will change the
    frequency continuously.

    Presetting Stations Manually

    1
    2

    Select the radio band and tune in a desired radio station
    you wish to store in the preset memory.
    Press and hold for at least 2 seconds, any one of the preset
    buttons (1 through 6) into which you wish to store the
    station.
    The selected station is stored.
    The display shows the band, preset number and station
    frequency memorized.

    Notes
    • A total of 30 stations can be stored in the preset memory (6 stations for
    each band; FM1, FM2, FM3, MW and LW).
    • If you store a station in a preset memory which already has a station,
    the current station will be cleared and replaced with the new station.

    9-EN



  • Page 10

    Presetting Stations Automatically

    1
    2

    RDS

    Press BAND repeatedly until the desired radio band is
    displayed.

    AUDIO/SETUP
    Rotary encoder

     /ENTER

    Press and hold TUNEA.ME for at least 2 seconds.
    The frequency on the display continues to change while the
    automatic memory is in progress. The tuner will automatically
    seek and store 6 strong stations in the selected band. They will
    be stored into preset buttons 1 to 6 in order of signal strength.
    When the automatic memory has been completed, the tuner
    goes to the station stored in preset location No.1.

    Note
    • If no stations are stored, the tuner will return to the original station you
    were listening to before the auto memory procedure began.

    BAND/TA


    VIEW

    Tuning to Preset Stations

    1
    2

    Turning AF (Alternative Frequencies) ON/OFF
    Press BAND repeatedly until the desired band is
    displayed.
    Press any one of the station preset buttons (1 through 6)
    that has your desired radio station in memory.
    The display shows the band, preset number and frequency of
    the station selected.

    Frequency Search Function
    You can search for a radio station by its frequency.

    1

    Press ENTER in Radio mode to activate Frequency
    search mode.
    The “” indicator lights up.

    2
    3

    Turn the Rotary encoder to select the desired frequency.

    The RDS (Radio Data System) is a radio information system using the
    57 kHz subcarrier of regular FM broadcast. The RDS allows you to
    receive a variety of information such as traffic information, station
    names, and to automatically re-tune to a stronger transmitter that is
    broadcasting the same programme.

    1

    Press and hold AUDIOSETUP for at least 2 seconds to
    activate the SETUP selection mode.

    2

    Turn the Rotary encoder to select the “TUNER” setup
    mode, and then press ENTER.

    3

    Turn the Rotary encoder to select the “AF”, and then press
    ENTER.

    4

    Turn the Rotary encoder to select the AF (Alternative
    Frequency) ON or OFF mode.

    5

    Press and hold AUDIOSETUP for at least 2 seconds to
    return to normal mode.

    Press ENTER to receive the selected frequency.

    Note

    Notes

    • Press r in the search mode to cancel. Or, the search mode will be
    cancelled if no operation is performed for 10 seconds.

    • When the AF ON mode is selected, the unit automatically tunes to a
    strong signal station in the AF list.
    • Use the AF OFF mode when automatic re-tuning is not required.
    • Press r to return to the previous mode.
    • Pressing and holding r for at least 2 seconds will return to normal
    mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    The RDS digital data includes the following:
    PI

    10-EN

    Programme Identification

    PS

    Programme Service Name

    AF

    List of Alternative Frequencies

    TP

    Traffic Programme

    TA

    Traffic Announcement

    PTY

    Programme Type

    EON

    Enhanced Other Networks



  • Page 11

    When the traffic information broadcast is over, the unit will
    automatically set in the standby mode.

    Receiving RDS Regional (Local) Stations

    Notes

    1
    2
    3
    4

    Press and hold AUDIOSETUP for at least 2 seconds to
    activate the SETUP selection mode.
    Turn the Rotary encoder to select the “TUNER” setup
    mode, and then press ENTER.
    Turn the Rotary encoder to select the “REGIONAL”, and
    then press ENTER.
    Turn the Rotary encoder to select “REG ON” or “REG OFF”.
    In the OFF mode, the unit automatically keeps receiving the
    related local RDS station.

    5

    • If you do not want to listen to the traffic information being received,
    lightly press BANDTA to skip that traffic information message. The TA
    mode will remain in the ON position to receive the next traffic
    information message.
    • If the volume level is changed while receiving traffic information, the
    changed volume level will be memorized. When traffic information is
    received next time, the volume level will be automatically adjusted to
    the level memorized.
    • In the TA mode, the SEEK tuning selects only the TP stations.

    Press and hold AUDIOSETUP for at least 2 seconds to
    return to normal mode.

    Notes
    • Press r to return to the previous mode.
    • Pressing and holding r for at least 2 seconds will return to normal
    mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    Receiving Traffic Information While Playing
    USB Audio or Radio

    1
    2

    2
    3
    4
    5

    Press and hold AUDIOSETUP for at least 2 seconds to
    activate the SETUP mode.

    In the tuner mode:
    When the TP signal can no longer be received for over 1 minute,
    the “G” indicator blinks.
    In other audio source mode:
    When the TP signal can no longer be received, the traffic
    information station of another frequency will be selected
    automatically.

    Turn the Rotary encoder to select “PI SEEK”, and then
    press ENTER.

    Note
    • The receiver is equipped with the EON (Enhanced Other Networks)
    function in order to keep track of additional alternate frequencies to
    the AF list. If the station being received does not broadcast the traffic
    information, the receiver automatically tunes in the related station that
    broadcasts the traffic information when it occurs.

    Turn the Rotary encoder to select “PISEEK ON” or “PISEEK
    OFF”.
    Press and hold AUDIOSETUP for at least 2 seconds to
    return to normal mode.

    • Press r to return to the previous mode.
    • Pressing and holding r for at least 2 seconds will return to normal
    mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    Receiving Traffic Information

    2

    When traffic information stations cannot be received:

    Turn the Rotary encoder to select the “TUNER” setup
    mode, and then press ENTER.

    Notes

    1

    Press  or  to select a traffic information station if
    necessary.
    When a traffic information broadcast starts, the unit
    automatically mutes the audio source (such as regular FM
    broadcast, USB AUDIO, etc.).
    When the traffic information broadcast finishes, the unit
    automatically returns to the original source play before the
    traffic information broadcast began.

    PI SEEK Setting

    1

    Press and hold BANDTA for at least 2 seconds so that the
    “G” indicator lights up.

    Press and hold BANDTA for at least 2 seconds so that the
    “G” indicator lights up.

    3

    Press and hold BANDTA for at least 2 seconds to
    deactivate the Traffic Information mode.
    The “G” indicator goes out.

    Displaying Radio Text
    Text messages from a radio station can be displayed.

    Press VIEW while receiving FM in the radio mode to select
    the Radio Text display.
    The display will change every time the button is pressed.
    For details, refer to “Displaying the Text” on page 19.

    Press  or  to select your desired traffic information
    station.
    When a traffic information station is tuned in, the “T”
    indicator lights up.
    Traffic information is heard only when it is being broadcast. If
    traffic information is not being broadcast, the unit is set in the
    standby mode. When a traffic information broadcast begins, the
    unit automatically receives it and the display shows “TRF-INFO”
    for 2 seconds.

    11-EN



  • Page 12

    CD/MP3/WMA/AAC
    (CDE-182R/CDE-181 Series/
    CDE-180 Series only)

    • During CD/MP3/WMA/AAC playback, press r, and then you can
    quickly return to the hierarchy level selected last time in the search
    mode.

    Repeat and Random Play

    1

    During playback, Press z 4 or 5 x repeatedly until the
    setting appears.
    RPT ONE a:
    Track/file is played back repeatedly.
    RPT FOLDER a*:
    Files in a folder are played back repeatedly.
    MIX FOLDER s*:
    Files in a folder are played back randomly.
    MIX ALL g:
    All files in the disc or USB Memory are played back randomly.

    SOURCE/ Rotary encoder

     /ENTER

    * When MP3/WMA/AAC files are played back.
    / II





    5

    4
    Preset buttons
    (1 through 6)

    2

    To cancel repeat or M.I.X. play, select (off) with the above
    procedure.

    Searching for CD Text (concerning Audio CD)
    Playback

    1

    Insert a disc with the label side facing up.
    The disc will be pulled into the unit automatically.

    On discs utilizing CD Text, songs can be searched and played by using
    their recorded titles. For discs without CD Text, searches are made using
    the track numbers associated with each song.

    1

    Press ENTER during play.
    This will set the search mode, and the “” indicator lights up.

    2

    Turn the Rotary encoder to select the desired track, and
    then press ENTER.
    This will play the selected track.

    Notes

    Note
    • When a disc is already inserted, press SOURCE to switch to the
    DISC mode.

    2

    While playing back MP3/WMA/AAC, press  or  to select
    the desired folder.
    Pressing and holding  or  will change folders continuously.

    3

    Press  or  to select the desired track (file).
    Pressing and holding  or  will fast backward/fast
    forward track continuously.

    4

    To pause playback, press .
    Pressing  again will resume playback.

    5

    To eject the disc, press .

    Notes
    • Do not remove a CD during its eject cycle. Do not load more than one
    disc at a time. A malfunction may result from doing either.
    • The “” indicator lights up when a disc is inserted.
    • Three-inch (8 cm) CDs cannot be used.
    • Any file protected by DRM (Digital Rights Management) copy
    protection, cannot be played back on this unit.
    • The track display for MP3/WMA/AAC data playback is the file
    numbers recorded on the disc.
    • The playback time may not be correctly displayed when a VBR
    (Variable Bit Rate) recorded file is played back.

    12-EN

    • Press r in the search mode to cancel. Or, the search mode is cancelled
    if no operation is performed for 10 seconds.
    • When CD Text Search is made during M.I.X. play, the M.I.X. play
    mode will be cancelled.
    • Press any of the preset buttons (1 through 6) during a search to skip
    over a calculated percentage of tracks. For details, refer to “Direct
    Search Function” on page 25.



  • Page 13

    Folder/File Name Search
    (concerning MP3/WMA/AAC)
    Folder and file names may be searched and displayed during playback.

    Folder Name Search mode

    1

    During MP3/WMA/AAC playback, press ENTER to
    activate the search mode.
    The “” indicator lights up.

    2
    3
    4

    Turn the Rotary encoder to select Folder Name Search
    mode, and then press ENTER.
    Turn the Rotary encoder to select the desired folder.
    Press and hold ENTER for at least 2 seconds to play
    back the first file in the selected folder.

    Notes
    • Press any of the preset buttons (1 through 6) during a Folder Name
    search to skip over a calculated percentage of folders. For details, refer to
    “Direct Search Function” on page 25.
    • Press and hold r for at least 2 seconds in the search mode to cancel.
    Or, the search mode is cancelled if no operation is performed for 10
    seconds.
    • To search for files in the Folder Name Search mode, press ENTER.
    Files in the folder may be searched.
    • Press r to exit Folder Name Search mode in step 3 in order to select
    File Name Search mode.
    • The root folder is displayed as “ROOT”.
    • When Folder Name Search is made during M.I.X. play, the M.I.X. play
    mode will be cancelled.

    File Name Search mode

    1

    During MP3/WMA/AAC playback, press ENTER to
    activate the search mode.
    The “” indicator lights up.

    2
    3
    4

    Turn the Rotary encoder to select File Name Search mode,
    and then press ENTER.
    Select the desired file by turning the Rotary encoder.
    Press ENTER to play back the selected file.

    Notes
    • Press any of the preset buttons (1 through 6) during a File Name
    search to skip over a calculated percentage of files. For details, refer to
    “Direct Search Function” on page 25.
    • Press and hold r for at least 2 seconds in the search mode to cancel.
    Or, the search mode is cancelled if no operation is performed for 10
    seconds.
    • Press r in the search mode to return to the previous mode.
    • When File Name Search is made during M.I.X. play, the M.I.X. play
    mode will be cancelled.

    Search Position Memory
    During playback, you can quickly return to the last-selected hierarchy
    level in the search mode.

    Press r.
    The hierarchy you selected last in the search mode is displayed.

    About MP3/WMA/AAC
    CAUTION
    Except for private use, duplicating audio data (including MP3/
    WMA/AAC data) or distributing, transferring, or copying it,
    whether for free or for a fee, without permission of the copyright
    holder is strictly prohibited by the Copyright Act and by
    international treaty.
    What is MP3?
    MP3, whose official name is “MPEG Audio Layer 3,” is a compression
    standard prescribed by the ISO, the International Standardisation
    Organisation and MPEG which is a joint activity institution of the IEC.
    MP3 files contain compressed audio data. MP3 encoding is capable of
    compressing audio data at extremely high ratios, reducing the size of
    music files to as much as one-tenth their original size. This is achieved
    while still maintaining near CD quality. The MP3 format realises such
    high compression ratios by eliminating the sounds that are either
    inaudible to the human ear or masked by other sounds.
    What is WMA?
    WMA, or “Windows Media™ Audio,” is compressed audio data.
    WMA is similar to MP3 audio data.
    What is AAC?
    AAC is the abbreviation for “Advanced Audio Coding,” and is a basic
    format of audio compression used by MPEG2 or MPEG4.
    Method for creating MP3/WMA/AAC files
    Audio data is compressed using software with MP3/WMA/AAC codecs.
    For details on creating MP3/WMA/AAC files, refer to the user’s manual
    for that software.
    MP3/WMA/AAC files that are playable on this device have the file
    extensions “mp3” / “wma” / “m4a”. Files with no extension cannot be
    played back (WMA ver. 7.1, 8 and 9 are supported). Protected files are
    not supported, neither are raw AAC files (using the “.aac” extension).
    There are many different versions of the AAC format. Confirm that the
    software being used conforms to the acceptable formats listed above.
    It’s possible that the format may be unplayable even though the
    extension is valid.
    Playback of AAC files encoded by iTunes is supported.
    Supported playback sampling rates and bit rates
    MP3
    Sampling rates:
    Bit rates:

    48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
    12 kHz, 11.025 kHz, 8 kHz
    8 - 320 kbps

    WMA
    Sampling rates:
    Bit rates:

    48 kHz, 44.1 kHz, 32 kHz
    32 - 192 kbps

    AAC
    Sampling rates:
    Bit rates:

    48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
    12 kHz, 11.025 kHz, 8 kHz
    16 - 320 kbps

    This device may not play back correctly depending on sampling rates.

    13-EN



  • Page 14

    ID3 tags/WMA tags
    This device supports ID3 tag v1 and v2, and WMA tag.
    If tag data is in an MP3/WMA/AAC file, this device can display the title
    (track title), artist name, and album name ID3 tag/WMA tag data.
    This device can only display single-byte alphanumeric characters (up to
    30 for ID3 tags and up to 15 for WMA tags) and the underscore. For
    non-supported characters, “NO SUPPORT” is displayed.
    If information contains characters other than ID3 tag information, the
    audio file may not be played back.
    The tag information may not be correctly displayed, depending on the
    contents.
    Playing back MP3/WMA/AAC
    MP3/WMA/AAC files are prepared, then written to a CD-R, CD-RW using
    CD-R writing software or stored to a USB Memory. A disc can hold up to
    509 files/folders (including Root Folders), and the maximum number of
    folders is 255.
    Playback may not be performed if a disc exceeds the limitations
    described above.
    Do not make a file’s playback time more than 1 hour.
    Media supported
    The media that this device can play back are CD-ROMs, CD-Rs, and
    CD-RWs.
    Corresponding File Systems
    This device supports discs formatted with ISO9660 Level 1 or Level 2.
    Under the ISO9660 standard, there are some restrictions to remember.
    The maximum nested folder depth is 8 (including the root directory).
    The number of characters for a folder/file name is limited.
    Valid characters for folder/file names are letters A-Z (all caps), numbers
    0-9, and ‘_’ (underscore).
    This device also can play back discs in Joliet, Romeo, etc., and other
    standards that conform to ISO9660. However, sometimes the file
    names, folder names, etc., are not displayed correctly.
    Formats supported
    This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD
    (CD-Extra) and Multi-Session.
    This device cannot correctly play back discs recorded with Track At
    Once or packet writing.
    Order of files
    Files are played back in the order that the writing software writes them
    to the disc. Therefore, the playback order may not be what is expected.
    Verify the writing order in the software’s documentation. The playback
    order of the folders and files is as follows.

    Root folder

    Folder

    MP3/WMA/AAC File

    * The folder No./ folder Name will not be displayed if no readable file is
    contained in the folder.

    14-EN

    Terminology
    Bit rate
    This is the “sound” compression rate specified for encoding. The higher
    the bit rate, the higher the sound quality, but also the larger the files.
    Sampling rate
    This value shows how many times per second the data is sampled
    (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so
    the sound is sampled (recorded) 44,100 times per second. The higher
    the sampling rate, the higher the sound quality, but also the larger the
    volume of data.
    Encoding
    Converting music CDs, WAVE (AIFF) files, and other sound files into the
    specified audio compression format.
    Tag
    Song information such as track titles, artist names, album names, etc.,
    written into MP3/WMA/AAC files.
    Root folder
    The root folder (or root directory) is found at the top of the file system.
    The root folder contains all folders and files. It is created automatically
    for all burned discs.



  • Page 15

    Audio Setup

    Sound Setting

    You can flexibly customize the unit to suit your own preference and
    usage. From the AUDIO SETUP menu, Audio Setting can be modified.

    AUDIO/SETUP
    Rotary encoder
     /ENTER

    Use steps 1 to 5 to select one of the setting modes to modify.
    See the applicable section below for details about the
    selected setting item.

    1
    2

    Press and hold AUDIOSETUP for at least 2 seconds to
    activate the SETUP mode.
    Turn the Rotary encoder to select AUDIO, and then press
    ENTER.
    Note

    Adjusting Subwoofer Level/Bass Level/Mid
    Level/Treble Level/Balance (Between Left
    and Right)/Fader (Between Front and Rear)/
    Loudness/Defeat

    1

    • When BASS ENGINE SQ setting is set to OFF (MANUAL SET)
    (page 16), you can also activate the Audio Setup mode directly by
    pressing BASS.

    3

    Turn the Rotary encoder to select the desired sound
    setting menu, and then press ENTER.
    EQ PRESETS*1/*3/*4  BASS ENGIN*2  LOUDNESS*1/*3 
    3BAND EQ*1/*3/*4/*5  SOURCE VOL  SUBWOOFER*7 
    SUBW LPF*1/*3/*6/*7  SUBW PHASE*6/*7/*8  SUBW SYS*3/*6/*7 
    POWER IC*7

    (e.g. Select SUBWOOFER)

    Press AUDIOSETUP repeatedly to choose the desired
    mode.

    *1 Adjustment cannot be performed when DEFEAT is set to ON.
    *2 Not displayed when the Audio Setup mode is activated by
    pressing BASS in MANUAL SET mode (page 18).
    *3 These items are set uniformly in BASS ENGINE SQ mode by
    adjusting BASS ENGINE SQ Level (page 18) and cannot be
    adjusted separately. If you want to change these settings
    separately, a message is displayed asking you to confirm that you
    want to exit the BASS ENGINE SQ mode. Select “YES” to make
    the setting.
    *4 Any changes made to either EQ PRESETS or 3BAND EQ are
    reflected in the other’s settings.
    *5 In step 3, three sound adjustment items (Bass, Mid and Treble)
    can be selected in 3BAND EQ mode. Turn the Rotary encoder
    to select the desired item, and then press ENTER to continue
    to step 4.
    *6 These functions are inoperable when SUBWOOFER is set to
    OFF.
    *7 Only for CDE-182R/CDE-181 Series/CDE-180 Series.
    *8 This function is inoperable when SUBW LPF is set to OFF
    (page 17).

    Each press changes the mode as follows:
    SUBWOOFER*1/*3  BASS LEVEL*2/*3  MID LEVEL*2/*3 
    TRE LEVEL*2/*3  BALANCE  FADER  LOUDNESS*2/*3 
    DEFEAT  VOLUME  SUBWOOFER

    *1 Only for CDE-182R/CDE-181 Series/CDE-180 Series. When the
    SUBWOOFER mode is set to OFF, its level cannot be adjusted.
    *2 Adjustable only when DEFEAT is OFF.
    *3 Not displayed when BASS ENGINE SQ mode is on. (Page 16)
    Subwoofer

    +0 ~ +15

    Bass level

    −7 ~ +7

    Mid level

    −7 ~ +7

    Treble level

    −7 ~ +7

    Balance

    L15 ~ R15

    Fader

    R15 ~ F15

    Loudness

    ON/OFF

    Defeat

    ON/OFF

    Volume

    0 ~ 35

    4

    Turn the Rotary encoder to change the setting, and then
    press ENTER.
    (e.g. Select SUBW ON or SUBW OFF)

    Note
    • If no operation is performed for 5 seconds, the unit automatically
    returns to normal mode.

    2

    Turn the Rotary encoder until the desired sound is
    obtained in each mode.
    By setting DEFEAT ON, previously adjusted settings of BASS,
    MID, TRE LEVEL and LOUDNESS will return to the factory
    defaults.

    5

    Press and hold AUDIOSETUP for at least 2 seconds to
    return to normal mode.

    Notes
    • Pressing r returns to the previous Sound menu mode.
    • Pressing and holding r for at least 2 seconds will return to normal
    mode.
    • If no operation is performed for 60 seconds, Sound menu mode is
    cancelled.

    15-EN



  • Page 16

    Equalizer Presets

     Setting the Bandwidth (WIDTH (Q))

    10 typical equalizer settings are preset at the factory for a variety of
    musical source material. USER settings are created in the 3BAND EQ
    mode.

    BASS

    WIDE 0.50  MEDIUM 1.00  MEDIUM 1.50 
    NARROW 2.00

    MID

    WIDE 0.75  MEDIUM 1.00  MEDIUM 1.25 
    NARROW 1.50

     Setting item: EQ PRESETS

    TREBLE

    WIDE 0.75  NARROW 1.25

    Setting contents:
    USER / FLAT (Initial setting) / POPS / ROCK / NEWS / JAZZ /
    ELEC DANCE / HIP HOP / EASY LIS / COUNTRY / CLASSICAL

    Setting BASS ENGINE SQ ON/OFF

    Changes the boosted bandwidth to wide or narrow. A wider setting will
    boost a wide range of frequencies above and below the centre frequency.
    A narrower setting will boost only frequencies near the centre
    frequency.

     Setting the Centre Frequency (CENTER FRQ)

    This unit has a BASS ENGINE SQ feature for Sound adjustment.

     Setting item: BASS ENGIN
    Setting contents:
    OFF (Initial setting) / ON
    OFF (MANUAL SET mode):
    Adjust each audio effect setting separately.
    ON (BASS ENGINE SQ mode):
    Adjust the Bass relative audio effect settings uniformly by
    adjusting the BASS ENGINE SQ Level (page 18).

    Notes
    • You can also set BASS ENGINE SQ ON/OFF directly by pressing and
    holding BASS. Refer to “Setting BASS ENGINE SQ ON/OFF” on
    page 18.
    • “
    ” indicator lights up when BASS ENGINE SQ mode is ON.
    • With BASS ENGINE SQ ON, adjusting the BASS ENGINE SQ Level
    uniformly effects various sound parameters for optimum Bass effect.
    Refer to “Adjusting BASS ENGINE SQ Level” on page 18.

    Turning Loudness On/Off
    Loudness introduces a special low-and high-frequency emphasis at low
    listening levels. This compensates for the ear’s decreased sensitivity to
    bass and treble sound.

     Setting item: LOUDNESS
    Setting contents:
    LOUD OFF (Initial setting) / LOUD ON

    Adjusting the Parametric Equalizer Curve
    (3BAND EQ)
    You can modify the Equalizer settings to create a response curve more
    appealing to your personal taste. The setting of Bass, Mid and Treble can
    be adjusted in this mode.

     Setting item: 3BAND EQ
     Further setting items: BASS / MID / TREBLE

    Setting the Control

    1

    3

    60 (Hz)  80 (Hz)  100 (Hz)  120 (Hz)
    500 (Hz)  1.0K (Hz)  1.5K (Hz)  2.5K (Hz)

    TREBLE

    7.5K (Hz)  10.0K (Hz)  12.5K (Hz)  15.0K (Hz)

    Emphasises the displayed frequency ranges.

     Setting the Level
    BASS

    −7 ~ +7

    MID

    −7 ~ +7

    TREBLE

    −7 ~ +7

    You can emphasise or weaken the level.

    Note
    • The adjustment can also be made by pressing AUDIO. Refer to
    “Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/Balance
    (Between Left and Right)/Fader (Between Front and Rear)/Loudness/
    Defeat” on page 15.

    Setting the Source Volume Level
    The output level of each source is individually adjustable. For example, if
    the TUNER level sounds lower than CD, its output can be adjusted
    without affecting the other sources.

     Setting item: SOURCE VOL
     Further setting items: TUNER / DISC*1 / USB / iPod*2 / AUX
    Setting contents:
    −14 dB ~ +14 dB
    *1 CDE-182R/CDE-181 Series/CDE-180 Series.
    *2 CDE-182R/CDE-181 Series only.

    Turning Subwoofer ON/OFF
    When the subwoofer is on, you can adjust the subwoofer output level
    (refer to “Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
    Balance (Between Left and Right)/Fader (Between Front and Rear)/
    Loudness/Defeat” on page 15).

     Setting item: SUBWOOFER
    After selecting BASS/MID/TREBLE from the 3BAND EQ
    adjustment mode, turn the Rotary encoder to select the
    desired setting item, and then press ENTER.
    WIDTH (Q)  CENTER FRQ  LEVEL

    2

    BASS
    MID

    Turn the Rotary encoder to select the desired setting
    value, and then press ENTER.
    Press r to return to the previous step.

    16-EN

    Setting contents:
    OFF / ON (Initial setting)
    OFF:
    No subwoofer signal is output from the Subwoofer RCA
    Connectors (refer to “Connections” on page 33).
    ON:
    The subwoofer signal is output from the Subwoofer RCA
    Connectors (refer to “Connections” on page 33).



  • Page 17

    ON:

    Adjusting the Low Pass Filter

    Speakers

    The Low Pass Filter on this unit can be adjusted to suit your personal
    taste.

    SPEAKER
    RIGHT FRONT

     Setting item: SUBW LPF
    Setting contents:
    OFF (Initial setting) / 60 (Hz) / 80 (Hz) / 120 (Hz) / 160 (Hz)

    SPEAKER
    RIGHT REAR

    All frequencies lower than the selected cutoff are output.

    Front
    Right

    Rear
    Right

    Setting the Subwoofer Phase
    SPEAKER
    LEFT REAR

    The subwoofer output phase is toggeled between SUBWOOFER
    NORMAL (0°) or SUBWOOFER REVERSE (180°). To adjust the level,
    turn the Rotary encoder.

     Setting item: SUBW PHASE

    SPEAKER
    LEFT FRONT

    Setting contents:
    NORMAL (Initial setting) / REVERSE

    Setting the Subwoofer System

    Rear
    Left

    Front
    Left

    Note

    When the subwoofer is on, you can select either SYS 1 or SYS 2 for the
    desired subwoofer effect.

    • No sound is produced by the system when the power output is set to
    OFF.

     Setting item: SUBW SYS
    Setting contents:
    SUBW SYS 1 / SUBW SYS 2 (Initial setting)
    SUBW SYS 1:
    Subwoofer level changes according to the main volume setting.
    SUBW SYS 2:
    Subwoofer level change is different from the main volume setting.
    For example, even at low volume settings, the subwoofer is still
    audible.

    External Device
    Connecting to an External Amplifier (POWER IC)
    When an external amplifier is connected, sound quality can be
    improved by stopping the power supply of the built-in amplifier.

     Setting item: POWER IC
    Setting contents:
    OFF / ON (Initial setting)
    OFF:
    Use this mode when the line output of this unit is used to drive an
    external amplifier. In this setting, the head unit’s internal amplifier
    is turned OFF and cannot drive speakers.
    ON:
    The speakers are driven by the built-in amplifier.
    OFF:

    Amplifier

    Front
    Left
    Front
    Right
    Rear
    Left

    Amplifier

    Rear
    Right

    17-EN



  • Page 18

    BASS ENGINE SQ Function
    BASS

    Rotary encoder
     /ENTER

    With the BASS ENGINE SQ function on this unit, several parameters
    affecting Bass performance are adjusted simultaneously. The BASS
    ENGINE SQ Level adjustment varies these parameters uniformly for
    optimum Bass effect at different levels.

    Setting BASS ENGINE SQ ON/OFF
    Press and hold BASS for at least 2 seconds to switch the
    sound mode.
    BASS ENGIN  MANUAL SET (Initial setting)
    BASS ENGINE SQ On (BASS ENGIN):
    Adjust the relavant Bass parameters uniformly by adjusting the
    BASS ENGINE SQ Level (page 18).
    BASS ENGINE SQ Off (MANUAL SET):
    Adjust each audio effect setting separately.

    Notes
    • This operation can also be performed by selected BASS ENGIN in
    Audio Setup mode. (Page 16)
    • “
    ” indicator lights up when BASS ENGINE SQ mode is ON.

    Adjusting BASS ENGINE SQ Level
    With BASS ENGINE SQ ON, adjusting the BASS ENGINE SQ Level
    uniformly effects various sound parameters for optimum Bass effect.

    1
    2

    Press Bass to display the BASS ENGINE SQ Level
    adjustment screen.
    Turn the Rotary encoder to select the desired level
    (0 ~ +6) (initial setting: +3), and then press ENTER.

    Notes
    • Adjustable only when DEFEAT is OFF.
    • The Bass parameters affected contain EQ PRESETS, LOUDNESS,
    3BAND EQ, SUBW LPF, SUBW SYS and SUBWOOFER Level. These
    items are set uniformly in BASS ENGINE SQ mode and cannot be
    adjusted separately.
    • The value of BASS ENGINE SQ Level 0 is the same as the setting of
    DEFEAT ON and Subwoofer Level 0. From Level 1 to Level 6, the effect
    of BASS ENGINE SQ increases level by level.
    • “
    ” indicator displays the current BASS ENGINE SQ Level .
    • If no operation is performed for 5 seconds, the unit automatically
    returns to normal mode.

    18-EN

    About Setup when the external power amplifier is connected.
    (CDE-182R/CDE-181 series/CDE-180 series only)
    In order to optimize the BASS ENGINE SQ, we recommend the
    following power amplifier setup.
    After setting up, you can adjust the BASS ENGINE SQ Level
    according to the music.

    1 Set gain of the power amplifier to “MIN”.
    2 Set the Crossover Mode Sector switch to “OFF”.
    3 Set the BASS ENGIN of this unit to “ON”, and the BASS
    ENGINE SQ Level to “3”.
    4 Play a song of the genre you frequently listen to, and
    adjust gain of the power amplifier.



  • Page 19

    *6 If an MP3/WMA/AAC file contains ID3 tag/WMA tag
    information, the ID3 tag/WMA tag information is displayed
    (e.g., song name, artist name, and album name). All other
    tag data is ignored.
    If there is no tag information, “ARTIST”/“ALBUM”/“SONG”
    is displayed.

    Other Functions
    SOURCE/

    Rotary encoder
     /ENTER/OPTION

    About “Text”
    Text compatible CDs contain text information such as the disc name and
    track name. Such text information is referred to as “text”.

    Notes

    VIEW

    Displaying the Text
    Text information, such as the disc name and the track name, will be
    displayed if playing a CD text compatible disc. It is also possible to
    display the folder name, the file name and the tag, etc., while playing
    MP3/WMA/AAC files.

    Press VIEW.
    The display will change every time the button is pressed.

    • Some characters may not be displayed correctly with this device,
    depending on the character type.
    • “NO SUPPORT” is displayed if text information is not supported by the
    unit.
    • The text or tag information may not be correctly displayed, depending
    on the contents.

    Using the Front AUX Input Terminal
    Connect a portable music player, etc. by simply connecting it to the
    input on the front panel. An optional adapter cable is required (standard
    RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).

    Press SOURCE, and select the AUXILIARY mode to
    listen to the portable device.

    Note

    Portable player, etc.

    Main unit

    • When the TEXTSCROLL is set to SCR MANUAL (refer to “Scroll
    Setting (TEXTSCROLL)” on page 21), press and hold VIEW for at least
    2 seconds, the current text will be scrolled one time (except Radio
    mode).
    The display in Radio mode:
    If there is PS (Programme Service Name)
    PS (Programme Service Name)*1  RADIO TEXT*2 
    PTY (Programme Type)*3  PS (Programme Service Name)
    If there is no PS (Programme Service Name)
    FREQUENCY  RADIO TEXT*2  PTY (Programme Type)*3 
    FREQUENCY

    or

    The display in CD mode
    (CDE-182R/CDE-181 Series/CDE-180 Series only):
    TRACK NO./ELAPSED TIME  TEXT (DISC NAME)*4 
    TEXT (TRACK NAME)*4  TRACK NO./ELAPSED TIME
    The display in MP3/WMA/AAC mode:
    FILE NO./ELAPSED TIME  FOLDER NO./FILE NO.  FOLDER
    NAME*5  FILE NAME*5  ARTIST NAME*6  ALBUM NAME*6
     SONG NAME*6  FILE NO./ELAPSED TIME
    The display in iPod mode (CDE-182R/CDE-181 Series only):
    TRACK NO./ELAPSED TIME  ARTIST NAME*6  ALBUM NAME*6
     SONG TITLE*6  TRACK NO./ELAPSED TIME

    *1 Press and hold VIEW for at least 2 seconds if PS is displayed
    in the radio mode, frequency will be displayed for 2 seconds.
    *2 If there is no receivable text message or the unit cannot
    receive a text message properly, “NO TEXT” is displayed.
    *3 If there is no receivable PTY broadcast, “NO PTY” is
    displayed.
    *4 Displayed during playback of a disc with CD text.
    If there is no text (Disc Name or Track Name), “DISC
    TEXT”/“TRACK TEXT” is displayed.
    *5 If there is no text (Folder Name or File Name), “FOLDER”/
    “FILE” is displayed.

    Optional adapter cable (RCA pin
    plugs [red, white] 3.5ø miniplugs)
    or (3.5ø miniplugs).

    Notes
    • This function is available only when AUX SETUP is set to ON. For
    details, refer to “Setting the AUX SETUP mode” on page 21.
    • If a USB Memory device is directly connected to the Front USB
    terminal, the size or shape may interfere with driving operations. Avoid
    making connections to the AUX Input and USB Input terminals at the
    same time.

    19-EN



  • Page 20

    Option Menu Setting
    You can quickly adjust the setting items relevant to the current SOURCE
    by using Option Menu.

    1

    Press and hold ENTER/OPTION for at least 2 seconds
    to activate the Option menu of the current source.

    SETUP
    AUDIO/SETUP
    Rotary encoder
    SOURCE/
     /ENTER

    Note
    • The option menu varies depending on the source.

    2
    3

    Turn the Rotary encoder to select the desired setting
    item, and then press ENTER.
    Turn the Rotary encoder to change the setting, and then
    press ENTER.
    After the setting, the display will return to the current source
    automatically.
    The following setting items are displayed when MENU LANG is
    set to ENGLISH. For details, refer to “Setting the Menu Language”
    on page 21.

     Setting item:

    Setting
    You can flexibly customize the unit to suit your own preferences and
    usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
    etc., can be modified.

    TUNER mode:
    TUNER SET*1  SOURCE VOL*2  DIMMER*3

    Use steps 1 to 5 to select one of the SETUP modes to modify.
    See the applicable section below for details about the
    selected SETUP item.

    DISC mode (CDE-182R/CDE-181 Series/CDE-180 Series only):
    CD SET*4  SOURCE VOL*2  DIMMER*3
    USB mode:
    SOURCE VOL*2  DIMMER*3

    1

    iPod mode (CDE-182R/CDE-181 Series only):
    APP DIRECT*5  iPod SET*6  SOURCE VOL*2  DIMMER*3

    2

    AUX mode:
    AUX SET*7  SOURCE VOL*2  DIMMER*3

    Turn the Rotary encoder to select the desired item, and
    then press ENTER.
    (e.g. Select GENERAL)

    *1 The setting items are the same as TUNER setting in SETUP
    mode. For details, refer to “SETUP” on page 20.
    *2 You can individually emphasise or weaken the volume level
    of the current source to create your own tonal preference. The
    setting values in Option mode and in SETUP mode are
    linkage. Refer to “Setting the Source Volume Level” on
    page 16.
    *3 Refer to “Dimmer Control” on page 21.
    *4 PLAY MODE can be selected in this mode. For details, refer
    to “Playing MP3/WMA/AAC Data (PLAY MODE)
    (CDE-182R/CDE-181 Series/CDE-180 Series only)” on
    page 21.
    *5 Refer to “Setting the iPod Control” on page 23.
    *6 The setting items are the same as iPod setting in SETUP
    mode. For details, refer to “iPod/iPhone Setting” on page 22.
    *7 AUX NAME can be selected in this mode. For details, refer to
    “Setting the AUX NAME mode” on page 21.

    AUDIO*1  GENERAL  DISPLAY  TUNER  iPod*2
    GENERAL:
    MENU LANG  AUX SETUP*3  AUX NAME*4  PLAY MODE*5
     DEMO MODE
    DISPLAY:
    DIMMER  TEXTSCROLL
    TUNER:
    AF*6  REGIONAL*7  PI SEEK*8
    iPod:
    iPod LIST

    *1
    *2
    *3
    *4
    *5
    *6

    Refer to “Audio Setup” on page 15.
    CDE-182R/CDE-181 Series only.
    Not displayed when the current source is AUXILIARY.
    Displayed only when AUX SETUP is set to ON.
    CDE-182R/CDE-181 Series/CDE-180 Series only.
    Refer to “Turning AF (Alternative Frequencies) ON/OFF” on
    page 10.
    *7 Refer to “Receiving RDS Regional (Local) Stations” on page 11.
    *8 Refer to “PI SEEK Setting” on page 11.

    Notes
    • Press r to return to the previous mode.
    • Pressing and holding r for at least 2 seconds will return to normal
    mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    Press and hold AUDIOSETUP for at least 2 seconds to
    activate the SETUP mode.

    3

    Turn the Rotary encoder to select a setting item, and then
    press ENTER.
    (e.g. Select AUX SETUP)

    4

    Turn the Rotary encoder to change the setting, and then
    press ENTER.
    (e.g. Select AUX ON or AUX OFF)

    5

    20-EN

    Press and hold AUDIOSETUP for at least 2 seconds to
    return to normal mode.



  • Page 21

    Notes

    Note

    • Press r to return to the previous mode.
    • Pressing and holding r for at least 2 seconds will return to normal
    mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    • Perform this setting before inserting a disc. If a disc has already been
    inserted, remove it first.

    Setting the Demonstration mode
    This unit has a demonstration feature for display.

    General Setting
    GENERAL is selected on the setup main menu in step 2.

    Setting the Menu Language
    Set the language to be displayed on the unit.

     Setting item: MENU LANG
    Setting contents:
    ENGLISH (Initial setting) / RUSSIAN / GERMAN / FRENCH /
    SPANISH / ITALIAN / DUTCH
    Note
    • The Owner’s Manual only describes the setup menu display when
    ENGLISH is set.

    Setting the AUX SETUP mode
    You can input the audio of an external device, (such as a Portable audio
    player) to the AUX connector of this unit.

     Setting item: AUX SETUP
    Setting contents:
    AUX OFF / AUX ON (Initial setting)
    AUX OFF:
    When set to OFF, AUX source cannot be selected.
    AUX ON:
    Set to ON when a portable device is connected. If SOURCE is
    pressed and AUX is selected, the sound of the portable device is
    input to the unit.

    Setting the AUX NAME mode
    You can change the AUX NAME display in the SETUP mode.

     Setting item: AUX NAME
    Setting contents:
    AUXILIARY (Initial setting) / TV / DVD / PORTABLE / GAME
    Note
    • PORTABLE is abbreviated as PMD in the display.

    Playing MP3/WMA/AAC Data (PLAY MODE)
    (CDE-182R/CDE-181 Series/CDE-180 Series only)
    This unit can play back CDs containing both CD and MP3/WMA/AAC
    data (created in Enhanced CD (CD Extra) format). However, in some
    situations, playback of an enhanced CD may be difficult. In this case,
    you can choose to play back the CD data session only. When a disc
    contains both CD and MP3/WMA/AAC data, playback starts from the
    CD data portion of the disc.

     Setting item: DEMO MODE
    Setting contents:
    ON (Initial setting) / OFF / QUITE OFF
    ON:
    The unit starts the demonstration if there is no operation for 30
    seconds.
    OFF:
    Quit the demonstration mode. Note that if this unit is
    disconnected from the vehicle’s battery, the next time you use this
    unit the DEMO mode will be ON.
    QUITE OFF:
    Quit the demonstration mode completely.

    Display Setting
    DISPLAY is selected on the setup main menu in step 2.

    Dimmer Control
    Set the Dimmer control to AUTO to decrease the illumination
    brightness of the unit with the head lights of the vehicle ON. This mode
    decreases the unit’s backlighting at a certain extent at night.

     Setting item: DIMMER
    Setting contents:
    DIM MANUAL / DIM AUTO (Initial setting)

    Scroll Setting (TEXTSCROLL)
    This CD player can scroll the disc and track names recorded on
    CD-TEXT discs, as well as the text information of MP3/WMA/AAC
    files, folder names, and tags.

     Setting item: TEXTSCROLL
    Setting contents:
    SCR MANUAL (Initial setting) / SCR AUTO
    SCR MANUAL:
    The above information is scrolled only when a disc is loaded, a
    channel or track is changed, etc.
    SCR AUTO:
    CD text information, folder and file names, and the tag
    information are scrolled continuously.

    Note
    • In parts of the display, scrolling may not occur, or scroll content may
    differ.

     Setting item: PLAY MODE
    Setting contents:
    CD-DA / CDDA/MP3 (Initial setting)
    CD-DA:
    Only the CD data in Session 1 can be played back.
    CDDA/MP3:
    CD data, MP3/WMA/AAC files in mixed mode, and multi-session
    discs can be played back.

    21-EN



  • Page 22

    iPod/iPhone Setting

    USB Memory (optional)

    “iPod” is selected on the setup main menu in step 2.

    iPod/iPhone Search Mode Setting

    SOURCE/

    The unit allows you to search the iPod/iPhone using nine different
    search modes.

     Setting item: iPod LIST
     Further setting items: PLAYLISTS / ARTISTS /ALBUMS /
    AUDIOBOOKS / PODCASTS / GENRES / COMPOSERS / SONGS /
    GENIUS MIX
    Setting contents:
    OFF / ON

    / II

    Notes
    • The search mode for Playlists/Artists/Albums/Podcasts/Genres/ Songs/
    Genius Mix is initially set to On. The search mode for Audiobooks/
    Composers is initially set to Off.
    • For search mode details, refer to “Searching for a desired Song” on
    page 24.

    Playing MP3/WMA/AAC Files from USB
    Memory (optional)
    If you connect a USB memory device containing MP3/WMA/AAC, the
    files can be searched and played back.

    1
    2

    Press SOURCE to switch to the USB AUDIO mode.
    To pause playback, press .
    Pressing  again will resume the playback.

    Notes
    • This unit plays back files in USB Memory with the same controls and
    modes used for playback of CDs containing MP3/WMA/AAC. For
    details, refer to “CD/MP3/WMA/AAC (CDE-182R/CDE-181 Series/
    CDE-180 Series only)” on page 12.
    • Before disconnecting USB Memory, be sure to change to another source
    or set to pause.
    • The playback time may not be correctly displayed when a VBR
    (Variable Bit Rate) recorded file is played back.

    About MP3/WMA/AAC File of USB Memory
    Playing back MP3/WMA/AAC
    MP3/WMA/AAC files are prepared, then stored to a USB Memory
    Device. This unit can recognise at most 100 folders and 100 files per
    folder stored in USB Memory. Playback may not be performed if a USB
    Memory Device exceeds the limitations described above.
    Do not make a file’s playback time more than 1 hour.
    Media supported
    This device can play back files stored on USB Memory devices designed
    for USB connection.
    Corresponding File Systems
    This device supports FAT 12/16/32 for USB Memory devices.

    22-EN



  • Page 23

    iPod/iPhone (optional)
    (CDE-182R/CDE-181 Series
    only)
    SOURCE/

    Rotary encoder

     /ENTER/OPTION

    / II
    BAND/ABC SEARCH



    1

    5
    4
    2
    Preset buttons
    (1 through 6)

    iPod nano (6th generation): Ver.1.2
    iPod touch (3rd generation): Ver.5.1.1
    iPod nano (5th generation): Ver.1.0.2
    iPod classic (160 GB) (Late 2009): Ver.2.0.4
    iPod touch (2nd generation): Ver.4.2.1
    iPod nano (4th generation): Ver.1.0.4
    iPod classic (120 GB): Ver.2.0.1
    iPod touch (1st generation): Ver.3.1.3
    iPod nano (3rd generation): Ver.1.1.3
    iPod classic (80 GB, 160 GB): Ver.1.1.2
    • Confirmed devices regarding Made for iPhone. Correct function of
    earlier versions cannot be guaranteed.
    iPhone 5: Ver.6.1.3
    iPhone 4S: Ver.6.1.3
    iPhone 4: Ver.6.1.3
    iPhone 3GS: Ver.6.1.3
    iPhone 3G: Ver.4.2.1
    iPhone: Ver.3.1.3
    • For clarity in identifying your model of iPod, please see Apple’s own
    document “Identifying iPod models” at
    http://support.apple.com/kb/HT1353
    • This unit does not support video playback from iPod/iPhone, even
    using a video-compatible cable.

    Setting the iPod Control
    Connecting an iPod/iPhone
    An iPod/iPhone can be connected to this unit by using the Interface
    cable for iPod (included with iPod). When an iPod/iPhone is connected
    to this unit, you can choose to control the iPod/iPhone using its own
    controls or by the head unit controls. For details, refer to “Setting the
    iPod Control” on page 23.
    These instructions refer to controlling the iPod/iPhone from this Head
    Unit (HU) only. Make sure iPod Control is set to HU MODE (HEAD
    UNIT). Refer to “Setting the iPod Control” on page 23. Refer to the
    iPod/iPhone manual for operations using the iPod/iPhone.
    This unit

    When an iPod/iPhone is connected, operate it from its own controls or
    from the head unit.

    1

    Press and hold ENTEROPTION for at least 2 seconds
    in the iPod mode.
    The Option menu for iPod mode is activated.

    2

    Turn the Rotary encoder to select “APP DIRECT”, and then
    press ENTER.
    The iPod control mode will switch between iPod MODE and HU
    MODE.
    HU MODE (HEAD UNIT):
    Operate the iPod/iPhone via this unit.
    This mode allows you to use M.I.X. play, repeat and music search in
    an iPod/iPhone from the head unit.

    USB Connection Terminal

    Note
    • In HU MODE, if you operate from an iPod/iPhone, the head unit’s
    display and operations may not correspond with those of the iPod/
    iPhone.
    iPod MODE:
    Operate the iPod/iPhone using its own controls. When iPod is
    selected, some functions will not be operable via the head unit.

    iPod/iPhone
    (sold separately)

    Notes

    Included with iPod/iPhone

    Notes
    • An iPhone connected to this unit operates as an iPod.
    • Internet and telephone functions of iPod touch or iPhone, etc., can also
    be used when connecting to the unit. However, using these functions
    will stop or pause the playing songs. At this time do not operate the unit
    to avoid a malfunction.
    About iPod/iPhone models usable with this unit
    • Confirmed devices regarding Made for iPod. Correct function of
    earlier versions cannot be guaranteed.
    iPod nano (7th generation): Ver.1.0.2
    iPod touch (5th generation): Ver.6.1.3
    iPod touch (4th generation): Ver.6.1.3

    • During HU MODE, you can switch to iPod MODE directly by pressing
    BAND.
    • Once the control mode is changed, the iPod/iPhone is paused. Press
     to continue.
    • Depending upon the iPod used, iPod control may not be selectable. Or,
    if iPod is selected, operation must still be from the head unit.

    Playback

    1
    2

    Press SOURCE to switch to the iPod mode.
    Press  or  to select the desired song.
    Pressing and holding  or  will fast backward/fast
    forward the current track.

    23-EN



  • Page 24

    3

    4

    To pause playback, press .
    Pressing  again will resume playback.

    Notes
    • A song playing on the iPod/iPhone while it is connected to this unit will
    continue to play from where it was paused after disconnection.
    • If you listen to an episode from a selected Podcast or Audiobook, the
    episode can be changed by pressing 1  or  2.
    • An episode may have several chapters. The chapter can be changed by
    pressing  or .
    • During iPod/iPhone playback, press r, and then you can quickly
    return to the hierarchy level selected last time in the search mode.

    Searching for a desired Song
    An iPod/iPhone can contain thousands of songs. Use one of the search
    modes listed below, that you deem most effective in finding a desired
    song.
    Each music category has its own individual hierarchy. Use the Playlist/
    Artist/Album/Song/Podcast/Genre/Composer/Audiobook/Genius Mix
    List search mode to narrow searches based on the table below.
    Hierarchy 1

    Hierarchy 2

    Hierarchy 3

    Hierarchy 4

    Playlist

    Song





    Artist*

    Album*

    Song



    Album*

    Song





    Song







    Podcast

    Episode





    Genre*

    Artist*

    Album*

    Song

    Composer*

    Album*

    Song



    Audiobook







    Genius Mix List







    Note
    • You can select your preferred search mode. Refer to “iPod/iPhone
    Search Mode Setting” on page 22.
    For example:
    Searching by Artist name
    The following example explains how an ARTIST search is performed.
    Another search mode can be used for the same operation, although the
    hierarchy differs.

    1

    Press ENTER to activate the search selection mode.
    The “” indicator lights up.

    2

    Turn the Rotary encoder to select the ARTIST search
    mode, and then press ENTER.
    SHUFFLEALL*1  PLAYLIST  ARTIST  ALBUM  SONG 
    PODCAST*2  GENRE  COMPOSER  AUDIOBOOK 
    GENIUS MIX*3/*4  SHUFFLEALL

    *1 Refer to “Random Play Shuffle (M.I.X.)” on page 25.
    *2 Depending on the iPod/iPhone, podcast search is not supported.
    *3 Depending on the connected iPod/iPhone, Genius Mix function
    may not be supported.
    *4 When an iPod/iPhone with Genius Mix List created by iTunes is
    connected to this unit, GENIUS MIX search mode can be used
    to search a Genius Mix List.
    Note
    • The display of search mode list varies depending on the setting of iPod
    LIST. For details, refer to “iPod/iPhone Search Mode Setting” on
    page 22.

    3

    Turn the Rotary encoder to select the desired Artist, and
    then press ENTER.

    24-EN

    5

    Turn the Rotary encoder to select the desired Album, and
    then press ENTER.
    Turn the Rotary encoder to select the desired Song, and
    then press ENTER.

    Notes
    • After pressing and holding ENTER for at least 2 seconds while in
    each hierarchy (except Song, Audiobook and Genius Mix List), all songs
    of the selected hierarchy are played back.
    • Playback [ALL] is only applicable for those categories marked with “*”,
    (refer to the table on the left) press and hold ENTER for at least 2
    seconds to play back all songs in the iPod/iPhone or selected search
    mode.
    • While in the search mode, if you press and hold r for 2 seconds, or no
    operation is performed for 10 seconds, the search mode is cancelled.
    • In the search mode, pressing r will return to the previous mode.
    • When search is made during M.I.X. play, the M.I.X. play mode will be
    cancelled.
    • “NO SONG” will be displayed if there are no songs in the selected
    playlist in the PLAYLIST search mode.
    • “NO PODCAST” will be displayed if there is no podcast data in the
    iPod/iPhone in the PODCAST search mode.
    • “NOAUDIOBOK” will be displayed if there is no audiobook data in the
    iPod/iPhone in AUDIOBOOK search mode.
    • “NO GENIUS” will be displayed if there is no genius mix list data in the
    GENIUS MIX search mode.
    • If “iPod name” stored in the iPod/iPhone is selected in the desired
    Playlist search mode, and ENTER is pressed, you can search for all
    songs in the iPod/iPhone. Also, if you press and hold ENTER for at
    least 2 seconds, all songs in the iPod/iPhone are played back.
    • Press any of the preset buttons (1 through 6) during a search to skip
    over a calculated percentage of songs. For details, refer to “Direct Search
    Function” on page 25.
    • During search mode, a search can be made quickly by Alphabet search
    function to find the desired artist or song, etc. For details, refer to
    “Alphabet search function” on page 24.

    Alphabet search function
    The unit’s alphabet search function can be used to search for an album,
    song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
    PODCAST/GENRE/COMPOSER/AUDIOBOOK search mode, select
    the first letter of your desired title (album, song, etc.), the titles
    beginning with this letter are listed. By using this function, you can
    quickly target any song.

    1

    After selecting a search mode, press BAND/ABC SEARCH.
    The letter selection list is displayed.

    2

    Turn the Rotary encoder to select a desired letter (e.g. M),
    and then press ENTER.
    The titles beginning with “M” are listed.

    3

    Turn the Rotary encoder to select the desired title.

    Notes
    • While in Alphabet search mode, pressing r will return to the previous
    mode.
    • If the PLAYLIST search mode is used to search for a song, the Alphabet
    search function is inactive in the song search hierarchy.
    • This function is unavailable when Genius Mix List is selected.



  • Page 25

    Direct Search Function

    Random Play Shuffle (M.I.X.)

    The unit’s direct search function can be used to search for an album,
    song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
    PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can
    quickly target any song.

    The Shuffle function of the iPod/iPhone is displayed as s on this unit.

    In the search mode, press any one of the preset buttons (1
    through 6) to quickly skip over a designated percent of
    your song content.
    Song search example:
    If there are 100 songs in your iPod/iPhone, they are divided into 6
    groups using percentages (shown below). These groups are
    assigned to the preset buttons (1 through 6).

    Shuffle Albums:
    The songs on each album are played back in proper order. Upon
    completion of all the songs on the album, the next album is selected
    randomly. This continues until all albums have been played.
    Shuffle Songs:
    Song shuffle randomly plays back songs within a selected category
    (playlist, album, etc.). The songs within the category are played just
    once until all songs have been played.

    1

    The songs are played back randomly.

    Example 1:
    Suppose the song you are searching for is located at around the
    middle (50%) of your library: press button 4 to jump to the 50th
    song and turn the Rotary encoder to find the desired song.
    Example 2:
    Suppose the song you are searching for is located near the end
    (83%) of your library: press button 6 to jump to the 83rd song
    and turn the Rotary encoder to find the desired song.

    s*1  s*2  (off )  s

    *1 Shuffle Albums.
    *2 Shuffle Songs.

    2

    17%

    33%

    50%

    67%

    83%

    Preset
    buttons

    1

    2

    3

    4

    5

    6

    Songs

    1st
    song

    17th
    song

    33rd
    song

    50th
    song

    67th
    song

    83rd
    song

    Notes

    To cancel M.I.X. play, select (off) with the above procedure.
    Note
    • If a song is selected in the album search mode before selecting M.I.X.
    play, the songs will not play back randomly even when Shuffle Albums
    is selected.

    All 100 songs (100%)
    0%

    Press 5 x.

    Shuffle ALL:
    Shuffle ALL plays all songs in the iPod/iPhone randomly. Any one
    song does not play back again until all songs have been played back.

    1
    2

    • This function is also applicable to CD/MP3/WMA/AAC search.
    • This function is inactive during Alphabet Search mode.

    Press ENTER to activate the search selection mode.
    Turn the Rotary encoder to select SHUFFLEALL, and then
    press ENTER.
    The “As” indicator lights up.
    To cancel M.I.X. play, press 5 x to select OFF.
    Note

    Select Playlist/Artist/Album/Genre/
    Composer
    Playlist/Artist/Album/Genre/Composer can be easily changed.
    For example, if you listen to a song from a selected album, the album can
    be changed.

    Press 1  or  2 to select the desired Playlist/Artist/
    Album/Genre/Composer.
    Notes
    • If the song search mode was used to select a song, this function is
    inactive.
    • If an album is selected during an artist search, other albums by that
    artist are searchable.
    • This function is inactive during shuffle (s) playback.

    • If Shuffle ALL is selected, the selected songs being played back in the
    search mode are cancelled.

    Repeat Play
    Only Repeat One is available for the iPod/iPhone.
    Repeat One:
    A single song is repeatedly played back.

    1

    Press z 4.
    The song is played back repeatedly.
    a*  (off )  a

    * Repeat One.

    2

    To cancel repeat play, select (off) with the above
    procedure.

    Note
    • During repeat playback, no other songs are selectable by pressing 
    or .

    25-EN



  • Page 26

    Information
    In Case of Difficulty
    If you encounter a problem, please turn the power off, then on again. If
    the unit is still not functioning normally, please review the items in the
    following checklist. This guide will help you isolate the problem if the
    unit is at fault. Otherwise, make sure the rest of your system is properly
    connected or consult your authorized Alpine dealer.

    Basic
    No function or display.
    • Vehicle’s ignition is off.
    – If connected following instructions, the unit will not operate with
    the vehicle’s ignition off.
    • Improper power lead (Red) and battery lead (Yellow) connections.
    – Check power lead and battery lead connections.
    • Blown fuse.
    – Check the fuse of the unit; replace with the proper value if
    necessary.

    Radio
    Unable to receive stations.
    • No antenna or open connection in cable.
    – Make sure the antenna is properly connected;
    replace the antenna or cable if necessary.
    Unable to tune stations in the seek mode.
    • You are in a weak signal area.
    – Make sure the tuner is in the DX mode.
    • If the area you are in is a primary signal area, the antenna may not be
    grounded and connected properly.
    – Check your antenna connections; make sure the antenna is
    properly grounded at its mounting location.
    • The antenna may not be the proper length.
    – Make sure the antenna is fully extended; if broken, replace the
    antenna with a new one.
    Broadcast is noisy.
    • The antenna is not the proper length.
    – Extend the antenna fully; replace it if it is broken.
    • The antenna is poorly grounded.
    – Make sure the antenna is grounded properly at its mounting
    location.

    CD (CDE-182R/CDE-181 Series/CDE-180
    Series only)
    CD Player not functioning.
    • Out of operating temperature range +50°C (+120°F) for CD.
    – Allow the vehicle’s interior (or trunk) temperature to cool.
    CD playback sound is wavering.
    • Moisture condensation in the CD Module.
    – Allow enough time for the condensation to evaporate (about
    1 hour).

    26-EN

    CD insertion not possible.
    • A CD is already in the CD player.
    – Eject the CD and remove it.
    • The CD is being improperly inserted.
    – Make sure the CD is being inserted following instructions in the
    CD Player Operation section.
    Unable to fast forward or backward the CD.
    • The CD has been damaged.
    – Eject the CD and discard it; using a damaged CD in your unit can
    cause damage to the mechanism.
    CD playback sound skips due to vibration.
    • Improper mounting of the unit.
    – Securely re-mount the unit.
    • The disc is very dirty.
    – Clean the disc.
    • The disc has scratches.
    – Change the disc.
    • The pick-up lens is dirty.
    – Do not use a commercially available lens cleaner disc. Consult
    your nearest Alpine dealer.
    CD playback sound skips without vibration.
    • The disc is dirty or scratched.
    – Clean the disc; damaged disc should be replaced.
    Error displays (built-in CD player only).
    • Mechanical error
    – Press . After the error indication disappears, insert the disc
    again. If the above-mentioned solution does not solve the problem,
    consult your nearest Alpine dealer.
    CD-R/CD-RW playback not possible.
    • Close session (finalisation) has not been performed.
    – Perform finalisation and attempt playback again.

    MP3/WMA/AAC
    MP3/WMA/AAC is not played back.
    • Writing error occurred. The MP3/WMA/AAC format is not
    compatible.
    – Make sure the MP3/WMA/AAC has been written in a supported
    format. Refer to “About MP3/WMA/AAC” on page 13, and then
    rewrite in the format supported by this device.

    Audio
    The sound is not output from the speakers.
    • Unit has no output signal of the internal amplifier.
    – POWER IC is switched to “ON”, refer to “Connecting to an
    External Amplifier (POWER IC)” on page 17 (CDE-182R/
    CDE-181 Series only).

    iPod (CDE-182R/CDE-181 Series only)
    iPod does not play and no sound is output.
    • The iPod has not been recognised.
    – Reset the iPod.



  • Page 27

    Indication for CD Player
    (CDE-182R/CDE-181 Series/CDE-180
    Series only)

    • No CD is inserted.
    – Insert a CD.
    • Although a disc is inserted, “NO DISC” is displayed and the unit does
    not start to play or eject the disc.
    – Remove the disc by following these steps:
    Press the  button again for at least 2 seconds.
    If the disc still does not eject, consult your Alpine dealer.

    • A copy-protected WMA file was played back.
    – You can only play back non-copy-protected files.

    • A sampling rate/bit rate not supported by the unit is used.
    – Use a sampling rate/bit rate that is supported by the unit.

    NO SUPPORT
    • Text information that is not recognisable by the unit has been input.
    – Use a USB Memory device with input text information that is
    supported by the unit.

    • Mechanism error.
    1 Press the  button and eject the CD.
    If not ejecting, consult your Alpine dealer.
    2 When the error indication remains after ejecting, press the 
    button again.
    If the error indication still does not turn off after pressing the 
    button for a few times, consult your Alpine dealer.

    • A copy-protected WMA file was played back.
    – You can only play back non-copy-protected files.

    • Communication error or others
    – Change to other source.
    – Turn the power off.
    – Turn the ignition key off, and then set to ON again.

    • Communication error
    – Turn the ignition key off, and then set to ON again.
    – Check the display by reconnecting between the USB Memory and
    this unit.

    • A sampling rate/bit rate not supported by the unit is used.
    – Use a sampling rate/bit rate that is supported by the unit.

    Indication for USB Memory

    • A USB device that is not supported by the unit is connected.
    – Connect a USB device that is supported by the unit.

    NO DEVICE
    • A USB Memory Device is not connected.
    – Make sure the USB Memory device is correctly connected and the
    cable is not excessively bent.

    • No MP3/WMA/AAC (file) is stored in the USB Memory.
    – Connect the USB Memory device after storing songs (files).

    • Power surge error
    Excessive voltage/current is supplied to the USB Memory.
    – Try another USB Memory, if available.

    Indication for iPod Mode
    (CDE-182R/CDE-181 Series only)

    • The iPod/iPhone is not connected.
    – Make sure the iPod/iPhone is correctly connected.
    Make sure the cable is not bent excessively.

    • There are no songs in the iPod/iPhone.
    – Download songs to the iPod/iPhone and connect to this unit.

    • Communication error
    – Turn the ignition key off, and then set to ON again.
    – Check the display by reconnecting between the iPod/iPhone and
    this unit, using the iPod/iPhone cable.

    27-EN



  • Page 28

    • Caused by the iPod/iPhone Software Version not being compatible
    with this unit.
    – Update the iPod/iPhone Software Version to be compatible with
    this unit.

    • The iPod/iPhone is not verified.
    – Reset the iPod.
    – Try another iPod/iPhone, if available.

    • Power surge error
    Excessive voltage/current is supplied to the iPod/iPhone.
    – Try another iPod/iPhone, if available.
    – Turn the power off.
    – Turn the ignition key off, and then set to ON again.

    28-EN



  • Page 29

    Specifications
    FM TUNER SECTION
    Tuning Range
    Mono Usable Sensitivity
    Alternate Channel Selectivity
    Signal-to-Noise Ratio
    Stereo Separation
    Capture Ratio

    87.5 ~ 108.0 MHz
    0.7 μV
    80 dB
    65 dB
    35 dB
    2.0 dB

    MW TUNER SECTION
    Tuning Range
    Sensitivity (IEC Standard)

    531 ~ 1,602 kHz
    25.1 μV/28 dB

    LW TUNER SECTION
    Tuning Range
    Sensitivity (IEC Standard)

    153 ~ 281 kHz
    31.6 μV/30 dB

    CD PLAYER SECTION
    (CDE-182R/CDE-181 Series/CDE-180 Series only)
    Frequency Response
    5 ~ 20,000 Hz (±1 dB)
    Wow & Flutter (% WRMS)
    Below measurable limits
    Total Harmonic Distortion
    0.008% (at 1 kHz)
    Dynamic Range
    95 dB (at 1 kHz)
    Signal-to-Noise Ratio
    105 dB
    Channel Separation
    85 dB (at 1 kHz)
    USB SECTION
    USB requirements
    Max. Power Consumption
    USB Class
    File System
    MP3 Decoding
    WMA Decoding
    AAC Decoding

    USB 1.1/2.0
    1,000 mA
    Mass Storage
    FAT 12/16/32
    MPEG AUDIO Layer-3
    Windows Media™ Audio
    AAC-LC format “.m4a” file

    PICKUP
    Wave length
    Laser power

    795 nm
    CLASS I

    GENERAL
    Power Requirement

    14.4 V DC
    (11 ~ 16 V allowable)
    50 W × 4
    2 V/10 k ohms

    Maximum Power Output
    Maximum Pre-Output Voltage
    (CDE-182R/CDE-181 Series/
    CDE-180 Series only)
    Bass
    ±14 dB at 100 Hz
    Mid
    ±14 dB at 1 kHz
    Treble
    ±14 dB at 10 kHz
    CDE-182R/CDE-181 Series/CDE-180 Series:
    Weight
    1.24 kg (2 lbs. 11 oz)
    UTE-81R:
    Weight
    0.9 kg (1lbs. 15 oz)

    CHASSIS SIZE
    Width
    Height
    Depth

    178 mm (7")
    50 mm (2")
    161.5 mm (6–3/8")

    NOSEPIECE SIZE
    Width
    Height
    Depth

    170 mm (6–3/4")
    46 mm (1–13/16")
    25 mm (1")

    Note
    • Due to continuous product improvement, specifications and design are
    subject to change without notice.

    CAUTION

    CLASS 1
    LASER PRODUCT
    (Bottom side of player)

    • iPhone, iPod, iPod classic, iPod nano, and iPod touch are
    trademarks of Apple Inc., registered in the U.S. and other
    countries.
    • “Made for iPod,” and “Made for iPhone,” mean that an electronic
    accessory has been designed to connect specifically to iPod, or
    iPhone, respectively, and has been certified by the developer to
    meet Apple performance standards. Apple is not responsible for
    the operation of this device or its compliance with safety and
    regulatory standards. Please note that the use of this accessory
    with iPod, or iPhone may affect wireless performance.
    • Windows Media and the Windows logo are trademarks, or
    registered trademarks of Microsoft Corporation in the United
    States and/or other countries.
    • MPEG Layer-3 audio coding technology licensed from
    Fraunhofer IIS and Thomson. Supply of this product only conveys
    a licence for private, non-commercial use and does not convey a
    licence nor imply any right to use this product in any commercial
    (i.e. revenue-generation) real time broadcasting (terrestrial,
    satellite, cable and/or any other media), broadcasting/streaming
    via internet, intranets and/or other networks or in other electronic
    content distribution systems, such as pay-audio or
    audio-on-demand applications. An independent licence for such
    use is required. For details, please visit
    http://www.mp3licensing.com

    29-EN



  • Page 30

    Installation and Connections
    Before installing or connecting the unit, please read the following
    and refer to “Operating Instructions” on page 5 for proper use.

    CAUTION

    WARNING

    HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

    MAKE THE CORRECT CONNECTIONS.

    The wiring and installation of this unit requires special technical
    skill and experience. To ensure safety, always contact the dealer
    where you purchased this product to have the work done.

    Failure to make the proper connections may result in fire or
    product damage.

    USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

    (Check with your dealer if you are not sure.) Failure to do so may
    result in fire, etc.

    Be sure to use only the specified accessory parts. Use of other than
    designated parts may damage this unit internally or may not
    securely install the unit in place. This may cause parts to become
    loose resulting in hazards or product failure.

    BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY
    TERMINAL.

    ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP
    METAL EDGE.

    Failure to do so may result in electric shock or injury due to
    electrical shorts.

    Route the cables and wiring away from moving parts (like the seat
    rails) or sharp or pointed edges. This will prevent crimping and
    damage to the wiring. If wiring passes through a hole in metal, use a
    rubber grommet to prevent the wire’s insulation from being cut by
    the metal edge of the hole.

    USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

    DO NOT SPLICE INTO ELECTRICAL CABLES.
    Never cut away cable insulation to supply power to other
    equipment. Doing so will exceed the current carrying capacity of
    the wire and result in fire or electric shock.

    DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
    When drilling holes in the chassis for installation, take precautions
    so as not to contact, damage or obstruct pipes, fuel lines, tanks or
    electrical wiring. Failure to take such precautions may result in fire.

    DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO
    MAKE GROUND CONNECTIONS.
    Bolts or nuts used for the brake or steering systems (or any other
    safety-related system), or tanks should NEVER be used for
    installations or ground connections. Using such parts could disable
    control of the vehicle and cause fire etc.

    KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF
    CHILDREN.
    Swallowing them may result in serious injury. If swallowed, consult
    a physician immediately.

    DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE
    OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER.
    Doing so may obstruct forward vision or hamper movement etc.
    and results in serious accident.

    DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING
    OBJECTS.
    Arrange wiring and cables in compliance with the manual to
    prevent obstructions when driving. Cables or wiring that obstruct
    or hang up on places such as the steering wheel, shift lever, brake
    pedals, etc. can be extremely hazardous.

    30-EN

    DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
    Avoid installing the unit in locations with high incidence of
    moisture or dust. Moisture or dust that penetrates into this unit may
    result in product failure.

    PRECAUTIONS
    • Be sure to disconnect the cable from the (−) battery post before
    installing your CDE-182R/CDE-181 Series/CDE-180 Series/
    UTE-81R. This will reduce any chance of damage to the unit in case
    of a short-circuit.
    • Be sure to connect the colour coded leads according to the diagram.
    Incorrect connections may cause the unit to malfunction or damage
    to the vehicle’s electrical system.
    • When making connections to the vehicle’s electrical system, be aware
    of the factory installed components (e.g. on-board computer). Do not
    tap into these leads to provide power for this unit. When connecting
    the CDE-182R/CDE-181 Series/CDE-180 Series/UTE-81R to the
    fuse box, make sure the fuse for the intended circuit of the
    CDE-182R/CDE-181 Series/CDE-180 Series/UTE-81R has the
    appropriate amperage. Failure to do so may result in damage to the
    unit and/or the vehicle. When in doubt, consult your Alpine dealer.
    • The CDE-182R/CDE-181 Series/CDE-180 Series/UTE-81R uses
    female RCA-type jacks for connection to other units (e.g. amplifier)
    having RCA connectors. You may need an adaptor to connect other
    units. If so, please contact your authorized Alpine dealer for
    assistance.
    • Be sure to connect the speaker (−) leads to the speaker (−) terminal.
    Never connect left and right channel speaker cables to each other or
    to the vehicle body.



  • Page 31

    2

    IMPORTANT
    Please record the serial number of your unit in the space provided
    below and keep it as a permanent record. The serial number or the
    engraved serial number is located on the bottom of the unit.
    SERIAL NUMBER: [
    ]
    INSTALLATION DATE: [
    ]
    INSTALLATION TECHNICIAN: [
    ]
    PLACE OF PURCHASE: [
    ]

    When your vehicle has the Bracket, mount the long hex
    bolt onto the rear panel of the CDE-182R/CDE-181 Series/
    CDE-180 Series/UTE-81R and put the Rubber Cap on the
    hex bolt. If your vehicle does not have the Mounting
    Support, reinforce the head unit with the metal mounting
    strap (not supplied). Connect all the leads of the
    CDE-182R/CDE-181 Series/CDE-180 Series/UTE-81R
    according to details described in the CONNECTIONS
    section.

    Installation

    Metal Mounting Strap
    Screw

    To prevent external noise from entering the audio system.
    • Locate the unit and route the leads at least 10 cm away from the
    car harness.
    • Keep the battery power leads as far away from other leads as
    possible.
    • Connect the ground lead securely to a bare metal spot (remove
    any paint, dirt or grease if necessary) of the car chassis.
    • If you add an optional noise suppressor, connect it as far away
    from the unit as possible. Your Alpine dealer carries various
    noise suppressors, contact them for further information.
    • Your Alpine dealer knows best about noise prevention
    measures so consult your dealer for further information.

    *
    Bolt Stud

    Hex Nut (M5)

    This unit

    *

    location.

    3

    CAUTION
    When you install this unit in your car, do not remove the
    detachable front panel.
    If the detachable front panel is removed during installation, you
    might press too hard and warp the metal plate that holds it in
    place.
    The main unit must be mounted within 35 degrees of the
    horizontal plane, back to front.

    Less than 35°

    For the screw*, provide a proper screw to the chassis installing

    Slide the CDE-182R/CDE-181 Series/CDE-180 Series/
    UTE-81R into the dashboard until it clicks. This ensures
    that the unit is properly locked and will not accidentally
    come out from the dashboard. Install the detachable front
    panel.

    Removal

    1
    2

    Remove the detachable front panel.
    Insert the bracket keys into the unit, along the guides on
    either side. The unit can now be removed from the
    mounting sleeve.
    This unit

    1

    Remove the mounting sleeve from the main unit (refer to
    “Removal” on page 31). Slide the mounting sleeve into the
    dashboard and fix it with the metal shackles.

    Bracket keys
    (Included)

    Rubber Cap (Included)

    Bracket

    Hex Bolt
    (Included)
    Mounting Sleeve
    (Included)

    Dashboard

    Pressure Plates*
    This unit

    * If the installed mounting sleeve is loose in the dashboard, the
    pressure plates may be bent slightly to remedy the problem.

    31-EN



  • Page 32

    3

    Pull the unit out, keeping it unlocked as you do so.

    JAPANESE CAR

    Front Frame

    This unit
    Mounting
    Bracket

    32-EN

    Screw (M5 × 8)
    (Included)



  • Page 33

    Connections
    (Blue/White)

    REMOTE TURN-ON

    To amplifier
    To power antenna
    (Red)

    IGNITION

    To the instrument cluster illumination lead
    (Black)
    (Blue)

    GND

    Ignition Key

    POWER ANT

    (Orange)

    DIMMER

    (Yellow)

    BATTERY

    Battery
    Speakers
    (Green)

    Rear Left

    (Green/Black)
    (White)

    Front Left

    (White/Black)
    (Grey/Black)

    Front Right

    (Grey)
    (Violet/Black)

    Rear Right

    (Violet)

    Speakers

    Amplifier

    Front (CDE-182R only)

    Amplifier

    Rear
    (CDE-182R only)
    Front
    (CDE-181 Series/CDE-180 Series only)

    Amplifier

    Subwoofers
    (CDE-182R only)
    Rear or Subwoofers*
    (CDE-181 Series/CDE-180 Series only)

    * When Subwoofer is OFF: Output is for Rear speakers. When Subwoofer is ON: Output is for Subwoofer.
    For details on how to set the Subwoofer to ON/OFF, refer to “Turning Subwoofer ON/OFF” on page 16.

    33-EN



  • Page 34

     Remote Turn-On Lead (Blue/White)
    Connect this lead to the remote turn-on lead of your amplifier or
    signal processor.

     Switched Power Lead (Ignition) (Red)
    Connect this lead to an open terminal on the vehicle’s fuse box or
    another unused power source which provides (+) 12V only when the
    ignition is turned on or in the accessory position.

     Ground Lead (Black)
    Connect this lead to a good chassis ground on the vehicle. Make sure
    the connection is made to bare metal and is securely fastened using
    the sheet metal screw provided.

     Power Antenna Lead (Blue)
    Connect this lead to the +B terminal of your power antenna, if
    applicable.

    Note
    • This lead should be used only for controlling the vehicle’s power
    antenna. Do not use this lead to turn on an amplifier or a signal
    processor, etc.

     Dimmer Lead (Orange)
    This lead may be connected to the vehicle’s instrument cluster
    illumination lead. This will enable the vehicle’s dimmer control to dim
    the backlighting of the unit.

     Battery Lead (Yellow)
    Connect this lead to the positive (+) post of the vehicle’s battery.

     ISO Power Supply Connector
     ISO Connector (Speaker Output)
     Left Rear (+) Speaker Output Lead (Green)
     Left Rear (−) Speaker Output Lead (Green/Black)
     Left Front (+) Speaker Output Lead (White)
     Left Front (−) Speaker Output Lead (White/Black)
     Right Front (−) Speaker Output Lead (Grey/Black)
     Right Front (+) Speaker Output Lead (Grey)
     Right Rear (−) Speaker Output Lead (Violet/Black)
     Right Rear (+) Speaker Output Lead (Violet)
     Fuse Holder (10A)
     Steering Remote Control Interface Connector (CDE-182R/
    CDE-181 Series/CDE-180 Series only)
    To steering remote control interface box.
    You can operate this unit from the vehicle’s control unit when an
    Alpine Steering Remote Control Interface Box (optional) is
    connected. For details, contact your Alpine dealer.

     Antenna Receptacle
     Front Output RCA Connectors (CDE-182R only)
    RED is right and WHITE is left.

     Rear Output RCA Connectors (CDE-182R only)
    RED is right and WHITE is left.

     Front Output RCA Connectors (CDE-181 Series/CDE-180
    Series only)
    RED is right and WHITE is left.

     Subwoofer Output RCA Connectors (CDE-182R only)
     Rear/Subwoofer Output RCA Connectors (CDE-181 Series/
    CDE-180 Series only)
    RED is right and WHITE is left.

     Power Supply Connector
     RCA Extension Cable (sold separately)
     Front AUX Input Terminal
    This terminal allows for input of audio from an external device (such
    as a portable player), using a commercially-available converter cable.

     USB Terminal
    Connect this to a USB Memory or an iPod/iPhone (sold separately).

    34-EN






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alpine CDE-180R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Alpine CDE-180R in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 2,85 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Alpine CDE-180R

Alpine CDE-180R Bedienungsanleitung - Deutsch - 35 seiten

Alpine CDE-180R Kurzanleitung - Deutsch, Englisch, Holländisch - 76 seiten

Alpine CDE-180R Bedienungsanleitung - Holländisch - 35 seiten

Alpine CDE-180R Kurzanleitung - Französisch, Italienisch, Spanisch, Polnisch, Schwedisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info