536899
18
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
18-EN
With the BASS ENGINE SQ function on this unit, several parameters
affecting Bass performance are adjusted simultaneously. The BASS
ENGINE SQ Level adjustment varies these parameters uniformly for
optimum Bass effect at different levels.
Setting BASS ENGINE SQ ON/OFF
Press and hold BASS for at least 2 seconds to switch the
sound mode.
BASS ENGIN MANUAL SET (Initial setting)
BASS ENGINE SQ On (BASS ENGIN):
Adjust the relavant Bass parameters uniformly by adjusting the
BASS ENGINE SQ Level (page 18).
BASS ENGINE SQ Off (MANUAL SET):
Adjust each audio effect setting separately.
Notes
This operation can also be performed by selected BASS ENGIN in
Audio Setup mode. (Page 16)
” indicator lights up when BASS ENGINE SQ mode is ON.
Adjusting BASS ENGINE SQ Level
With BASS ENGINE SQ ON, adjusting the BASS ENGINE SQ Level
uniformly effects various sound parameters for optimum Bass effect.
1
Press Bass to display the BASS ENGINE SQ Level
adjustment screen.
2
Turn the Rotary encoder to select the desired level
(0 ~ +6) (initial setting: +3), and then press ENTER.
Notes
Adjustable only when DEFEAT is OFF.
The Bass parameters affected contain EQ PRESETS, LOUDNESS,
3BAND EQ, SUBW LPF, SUBW SYS and SUBWOOFER Level. These
items are set uniformly in BASS ENGINE SQ mode and cannot be
adjusted separately.
The value of BASS ENGINE SQ Level 0 is the same as the setting of
DEFEAT ON and Subwoofer Level 0. From Level 1 to Level 6, the effect
of BASS ENGINE SQ increases level by level.
” indicator displays the current BASS ENGINE SQ Level .
If no operation is performed for 5 seconds, the unit automatically
returns to normal mode.
BASS ENGINE SQ Function
About Setup when the external power amplifier is connected.
(CDE-182R/CDE-181 series/CDE-180 series only)
In order to optimize the BASS ENGINE SQ, we recommend the
following power amplifier setup.
After setting up, you can adjust the BASS ENGINE SQ Level
according to the music.
1 Set gain of the power amplifier to “MIN”.
2 Set the Crossover Mode Sector switch to “OFF”.
3 Set the BASS ENGIN of this unit to “ON”, and the BASS
ENGINE SQ Level to “3”.
4 Play a song of the genre you frequently listen to, and
adjust gain of the power amplifier.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alpine CDE-180RR wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Alpine CDE-180RR

Alpine CDE-180RR Bedienungsanleitung - Deutsch - 35 seiten

Alpine CDE-180RR Kurzanleitung - Deutsch, Englisch, Holländisch - 76 seiten

Alpine CDE-180RR Bedienungsanleitung - Holländisch - 35 seiten

Alpine CDE-180RR Kurzanleitung - Französisch, Italienisch, Spanisch, Polnisch, Schwedisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info