Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
YAMAGATA (Wuxi) Co., Ltd.
Block 28-25, Changjiang Nanlu, WND, jiangsu, China
Designed by ALPINE Japan
Printed in China (Y)
68-05946Z90-A
EN
DE
FR
ES
IT
SE
01GB01CDE-9870R.fm
ALPINE CDE-9870R 68-05946Z90-A (EN)
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/
PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK
RDS MP3 CD Receiver
CDE-9870R
OWNER’S MANUAL
Please read before using this equipment.
BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung bitte vor
Gebrauch des Gerätes.
MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa igenom
denna användarhandledning.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117,
80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
R
01GB00CDE-9870R.book Page 1 Wednesday, November 1, 2006 10:47 AM
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    01GB00CDE-9870R.book Page 1 Wednesday, November 1, 2006 10:47 AM

    FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/
    PARA USO EN AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK

    R

    EN

    RDS MP3 CD Receiver

    CDE-9870R
    DE
    • OWNER’S MANUAL
    Please read before using this equipment.
    • BEDIENUNGSANLEITUNG
    Lesen Sie diese Bedienungsanleitung bitte vor
    Gebrauch des Gerätes.

    FR

    • MODE D’EMPLOI
    Veuillez lire avant d’utiliser cet appareil.
    • MANUAL DE OPERACIÓN
    Léalo antes de utilizar este equipo.
    • ISTRUZIONI PER L’USO
    Si prega di leggere prima di utilizzare il
    attrezzatura.

    ES

    • ANVÄNDARHANDLEDNING
    Innan du använder utrustningen bör du läsa igenom
    denna användarhandledning.

    ALPINE ELECTRONICS MARKETING, INC.
    1-1-8 Nishi Gotanda,
    Shinagawa-ku,
    Tokyo 141-0031, Japan
    Phone 03-5496-8231
    ALPINE ELECTRONICS OF AMERICA, INC.
    19145 Gramercy Place, Torrance,
    California 90501, U.S.A.
    Phone 1-800-ALPINE-1 (1-800-257-4631)
    ALPINE ELECTRONICS OF CANADA, INC.
    777 Supertest Road, Toronto,
    Ontario M3J 2M9, Canada
    Phone 1-800-ALPINE-1 (1-800-257-4631)

    ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
    161-165 Princes Highway, Hallam
    Victoria 3803, Australia
    Phone 03-8787-1200

    ALPINE ITALIA S.p.A.
    Viale C. Colombo 8, 20090 Trezzano
    Sul Naviglio (MI), Italy
    Phone 02-484781

    ALPINE ELECTRONICS GmbH
    Frankfurter Ring 117,
    80807 München, Germany
    Phone 089-32 42 640

    ALPINE ELECTRONICS DE ESPAÑA, S.A.
    Portal de Gamarra 36, Pabellón, 32
    01013 Vitoria (Alava)-APDO 133, Spain
    Phone 945-283588

    ALPINE ELECTRONICS OF U.K. LTD.
    Alpine House
    Fletchamstead Highway, Coventry CV4 9TW, U.K.
    Phone 0870-33 33 763

    ALPINE ELECTRONICS (BENELUX) GmbH
    Leuvensesteenweg 510-B6,
    1930 Zaventem, Belgium
    Phone 02-725-13 15

    ALPINE ELECTRONICS FRANCE S.A.R.L.
    (RCS PONTOISE B 338 101 280)
    98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
    B.P. 50016, 95945 Roissy Charles de Gaulle
    Cedex, France
    Phone 01-48638989

    YAMAGATA (Wuxi) Co., Ltd.
    Block 28-25, Changjiang Nanlu, WND, jiangsu, China

    IT

    SE

    Designed by ALPINE Japan
    Printed in China (Y)
    68-05946Z90-A

    01GB01CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 2

    01GB00CDE-9870R.book Page 1 Wednesday, November 1, 2006 10:47 AM

    ENGLISH

    Contents
    Operating Instructions

    Sound Setting
    Adjusting Bass/Treble/Balance (Between Left
    and Right)/Fader (Between Front and Rear)/
    Loudness/Defeat .......................................... 13
    Setting the Bass Control ................................. 14

    WARNING
    WARNING ................................................. 3
    CAUTION .................................................. 3
    PRECAUTIONS ........................................ 3

    Getting Started
    Accessory List .................................................. 6

    Setting the Treble Control ............................... 14
    Adjusting the High Pass Filter ........................ 15

    Other Functions
    Displaying the Text ......................................... 15

    SETUP
    Sound Customizing

    Turning Power On and Off ............................... 6

    Adjusting Source Signal Levels .......................16
    Subwoofer On and Off .....................................17
    Setting the Subwoofer System .........................17

    Detaching and Attaching the Front Panel ........ 6
    Initial System Start-Up ..................................... 6
    Adjusting Volume ............................................. 6

    Visual Customizing
    Scroll Type Setting ...........................................17
    Scroll Setting (TEXT SCR) ..............................17
    Demonstration ..................................................17

    Radio
    Listening to Radio ............................................ 7
    Presetting Stations Manually ............................ 7
    Presetting Stations Automatically .................... 7
    Tuning to Preset Stations .................................. 7

    RDS
    Setting RDS Reception Mode and Receiving
    RDS Stations ................................................. 8
    Recalling Preset RDS Stations ......................... 8

    MP3
    Playing MP3 Data (PLAY MODE) ..................17

    External Device
    Connecting to an External Amplifier
    (POWER IC) .................................................17
    Setting the AUX+ Mode ...................................18

    iPod® (Optional)

    Receiving RDS Regional (Local) Stations ....... 8

    Playback .......................................................... 18

    PI SEEK Setting ............................................... 9

    Searching for a desired Song .......................... 19

    Receiving Traffic Information .......................... 9

    Direct Search Function ................................... 19

    Receiving Traffic Information While Playing
    CD or Radio .................................................. 9

    Select Playlist/Artist/Album/Podcast/Genre/
    Composer .................................................... 19

    Displaying Radio Text ...................................... 9

    Random Play Shuffle (M.I.X.) ....................... 20

    CD/MP3

    Repeat Play ..................................................... 20
    Displaying the Text ......................................... 20

    Playback ......................................................... 10
    Repeat Play ..................................................... 10

    Information

    M.I.X. (Random Play) .................................... 11

    In Case of Difficulty ....................................... 21

    Searching from CD Text ................................ 11

    Specifications .................................................. 23

    File/Folder Name Search
    (concerning MP3) ....................................... 11
    About MP3 ..................................................... 12

    1-EN
    01GB03CDE-9870RTOC.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 3

    01GB00CDE-9870R.book Page 2 Wednesday, November 1, 2006 10:47 AM

    Installation and Connections
    Warning .................................................. 24
    Caution ................................................... 24
    Precautions ............................................ 24
    Installation ...................................................... 25
    Connections .................................................... 26

    2-EN
    01GB03CDE-9870RTOC.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 4

    01GB00CDE-9870R.book Page 3 Wednesday, November 1, 2006 10:47 AM

    Operating Instructions
    WARNING
    WARNING
    This symbol means important instructions.
    Failure to heed them can result in serious injury
    or death.
    DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
    ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
    Any function that requires your prolonged attention should only be
    performed after coming to a complete stop. Always stop the vehicle
    in a safe location before performing these functions. Failure to do
    so may result in an accident.

    KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
    HEAR OUTSIDE NOISES WHILE DRIVING.

    CAUTION
    This symbol means important instructions.
    Failure to heed them can result in injury or
    material property damage.
    HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
    Failure to do so may cause personal injury or damage to the
    product. Return it to your authorized Alpine dealer or the nearest
    Alpine Service Centre for repairing.

    PRECAUTIONS
    Product Cleaning
    Use a soft dry cloth for periodic cleaning of the product. For more
    severe stains, please dampen the cloth with water only. Anything
    else has the chance of dissolving the paint or damaging the plastic.

    Excessive volume levels that obscure sounds such as emergency
    vehicle sirens or road warning signals (train crossings, etc.) can be
    dangerous and may result in an accident. LISTENING AT LOUD
    VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
    DAMAGE.

    Temperature

    DO NOT DISASSEMBLE OR ALTER.

    You may notice the CD playback sound wavering due to
    condensation. If this happens, remove the disc from the player and
    wait about an hour for the moisture to evaporate.

    Doing so may result in an accident, fire or electric shock.

    USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
    (Check with your dealer if you are not sure.) Failure to do so may
    result in fire, etc.

    KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
    REACH OF CHILDREN.
    Swallowing them may result in serious injury. If swallowed,
    consult a physician immediately.

    Be sure the temperature inside the vehicle is between +60°C
    (+140°F) and –10°C (+14°F) before turning your unit on.

    Moisture Condensation

    Damaged Disc
    Do not attempt to play cracked, warped, or damaged discs. Playing
    a bad disc could severely damage the playback mechanism.

    Maintenance
    If you have problems, do not attempt to repair the unit yourself.
    Return it to your Alpine dealer or the nearest Alpine Service
    Station for servicing.

    USE THE CORRECT AMPERE RATING WHEN REPLACING
    FUSES.
    Failure to do so may result in fire or electric shock.

    DO NOT BLOCK VENTS OR RADIATOR PANELS.
    Doing so may cause heat to build up inside and may result in fire.

    USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
    Use for other than its designed application may result in fire,
    electric shock or other injury.

    DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
    INSERTION SLOTS OR GAPS.
    Doing so may result in personal injury or damage to the product.

    3-EN
    01GB04CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 5

    01GB00CDE-9870R.book Page 4 Wednesday, November 1, 2006 10:47 AM

    Never Attempt the Following

    Installation Location

    Do not grip or pull out the disc while it is being pulled back into the
    player by the automatic reloading mechanism.
    Do not attempt to insert a disc into the unit when the unit power is
    off.

    Make sure this unit will not be installed in a location subjected to:





    Direct sun and heat
    High humidity and water
    Excessive dust
    Excessive vibrations

    Correct Handling
    Do not drop the disc while handling. Hold the disc so you will not
    leave fingerprints on the surface. Do not affix tape, paper, or
    gummed labels to the disc. Do not write on the disc.
    CORRECT

    Inserting Discs
    Your player accepts only one disc at a time for playback. Do not
    attempt to load more than one disc.
    Make sure the label side is facing up when you insert the disc.
    “ERROR” will be displayed on your player if you insert a disc
    incorrectly. If “ERROR” continues to be displayed even though the
    disc has been inserted correctly, push the RESET switch with a
    pointed object such as a ballpoint pen.
    Playing a disc while driving on a very bumpy road may result in
    skips, but this will not scratch the disc or damage the player.

    To prevent the CD from jamming, “ERROR” is displayed if discs
    with irregular surfaces are inserted or if discs are inserted
    incorrectly. When a new disc is ejected immediately after initial
    loading, use your finger to feel around the inside of the centre hole
    and outside edge of the disc. If you feel any small bumps or
    irregularities, this could inhibit proper loading of the disc. To
    remove the bumps, rub the inside edge of the hole and outside edge
    of the disc with a ballpoint pen or other such instrument, then insert
    the disc again.

    Bumps

    CORRECT

    Disc Cleaning

    New Discs

    Centre Hole

    INCORRECT

    Fingerprints, dust, or soil on the surface of the disc could cause the
    CD player to skip. For routine cleaning, wipe the playing surface
    with a clean, soft cloth from the centre of the disc to the outer edge.
    If the surface is heavily soiled, dampen a clean, soft cloth in a
    solution of mild neutral detergent before cleaning the disc.

    Centre Hole
    New Disc

    Outside
    (Bumps)

    Irregular Shaped Discs
    Be sure to use round shape discs only for this unit and never use
    any special shape discs.
    Use of special shape discs may cause damage to the mechanism.

    Disc Accessories
    There are various accessories available on the market for protecting
    the disc surface and improving sound quality. However, most of
    them will influence the thickness and/or diameter of the disc. Using
    such accessories can cause the disc to be out of standard
    specifications and may create operational problems. We
    recommend not using these accessories on discs played in Alpine
    CD players.

    Transparent Sheet

    Disc Stabilizer

    4-EN
    01GB04CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 6

    01GB00CDE-9870R.book Page 5 Wednesday, November 1, 2006 10:47 AM

    On handling Compact Discs (CD/CD-R/CD-RW)







    Do not touch the surface.
    Do not expose the disc to direct sunlight.
    Do not affix stickers or labels.
    Clean the disc when it is dusty.
    Make sure that there are no bumps around the disc.
    Do not use commercially available disc accessories.

    Do not leave the disc in the car or the unit for a long time.
    Never expose the disc to direct sunlight. Heat and humidity may
    damage the CD and you may not be able to play it again.

    To customers using CD-R/CD-RW
    • If a CD-R/CD-RW cannot be played back, make sure the last
    recording session was closed (finalized).
    • Finalize the CD-R/CD-RW if necessary, and attempt playback
    again.

    About media that can be played
    Use only compact discs with the label side showing the CD logo
    marks below.

    If you use unspecified compact discs, correct performance cannot
    be guaranteed.
    You can play CD-Rs (CD-Recordables)/CD-RWs (CDReWritables) which have been recorded only on audio devices.
    You can also play CD-Rs/CD-RWs containing MP3 formatted
    audio files.
    • Some of the following CDs may not play on this unit:
    Flawed CDs, CDs with fingerprints, CDs exposed to extreme
    temperatures or sunlight (e.g., left in the car or this unit), CDs
    recorded under unstable conditions, CDs on which a recording
    failed or a re-recording was attempted, copy-protected CDs
    which do not conform to the audio CD industry standard.
    • Use discs with MP3 files written in a format compatible with this
    unit. For details, see pages 12-13.
    • ROM data other than audio files contained in a disc will not
    produce sound when played back.
    • Apple, the Apple logo and iPod are trademarks of Apple
    Computer, Inc., registered in the U.S. and other countries.
    • “MPEG Layer-3 audio coding technology licensed from
    Fraunhofer IIS and Thomson.”
    • “Supply of this product only conveys a license for private, noncommercial use and does not convey a license nor imply any
    right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable
    and/or any other media), broadcasting/streaming via internet,
    intranets and/or other networks or in other electronic content
    distribution systems, such as pay-audio or audio-on-demand
    applications. An independent license for such use is required.
    For details, please visit http://www. mp3licensing.com”

    5-EN
    01GB04CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 7

    01GB00CDE-9870R.book Page 6 Wednesday, November 1, 2006 10:47 AM

    Getting Started
    SOURCE/

    Attaching

    1
    2

    Insert the right side of the front panel into the main
    unit. Align the groove on the front panel with the
    projections on the main unit.
    Push the left side of the front panel until it locks
    firmly into the main unit.

    (Release)

    Accessory List









    Head unit ............................................................................1
    Power cable ........................................................................1
    Mounting sleeve.................................................................1
    Carrying case .....................................................................1
    Rubber Cap ........................................................................1
    Hex Bolt ..............................................................................1
    Screw (M5 × 8)....................................................................4
    Owner’s Manual .......................................................... 1 set

    Turning Power On and Off
    Press SOURCE/

    to turn on the unit.

    • The unit can be turned on by pressing any other button except
    (Release) and eject .

    Press and hold SOURCE/
    turn off the unit.

    • Before attaching the front panel, make sure that there is no dirt or
    dust on the connector terminals and no foreign object between the
    front panel and the main unit.
    • Attach the front panel carefully, holding the sides of the front panel to
    avoid pushing buttons by mistake.

    Initial System Start-Up
    Be sure to press the RESET switch when using the unit for the first
    time, after changing the car battery, etc.

    1
    2
    3

    Turn off the unit power.
    Remove the detachable front panel.
    Press RESET with a ballpoint pen or similar pointed
    object.

    for at least 2 seconds to

    1

    • The first time power is turned on, the volume will start from level 12.
    RESET switch

    Detaching and Attaching the Front Panel
    Detaching

    1
    2
    3

    Turn off the unit power.
    Press
    (Release) at the lower left side until the
    front panel pops out.
    Grasp the left side of the front panel and pull it out.

    Adjusting Volume
    Press

    or

    until the desired sound is obtained.

    Pressing and holding
    continuously.

    or

    will change the volume level

    Connectable to Steering Remote Control Interface Box
    You can operate this unit from the vehicle’s control unit when
    an Alpine Steering Remote Control Interface Box (optional) is
    connected. For details, contact your Alpine dealer.

    • The front panel may become hot in normal usage (especially the
    connector terminals on the back of the front panel). This is not a
    malfunction.
    • To protect the front panel, place it in the supplied carrying case.
    • When detaching the front panel, do not apply excessive force as it
    may result in malfunction.

    6-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 8

    01GB00CDE-9870R.book Page 7 Wednesday, November 1, 2006 10:47 AM

    Presetting Stations Automatically

    Radio

    1

    SOURCE/
    TUNE/A.ME
    BAND/TA

    2

    Press BAND/TA repeatedly until the desired radio
    band is displayed.
    Press and hold TUNE/A.ME for at least 2 seconds.
    The frequency on the display continues to change while the
    automatic memory is in progress. The tuner will
    automatically seek and store 6 strong stations in the
    selected band. They will be stored into preset buttons 1 to 6
    in order of signal strength.
    When the automatic memory has been completed, the tuner
    goes to the station stored in preset location No.1.

    Preset buttons
    (1 through 6)
    FUNC./SETUP

    • If no stations are stored, the tuner will return to the original station
    you were listening to before the auto memory procedure began.

    Listening to Radio

    Tuning to Preset Stations

    1
    2

    1

    Press SOURCE/

    Press BAND/TA repeatedly until the desired radio
    band is displayed.
    F1 (FM1)

    3

    to select TUNER mode.

    F2 (FM2)

    F3 (FM3)

    MW

    LW

    F1 (FM1)

    Press TUNE/A.ME to select the tuning mode.
    DX SEEK (Distance mode)
    SEEK (Local mode)
    OFF (Manual mode)
    DX SEEK

    • The initial mode is Distance mode.

    2

    Press BAND/TA repeatedly until the desired band is
    displayed.
    Press any one of the station preset buttons (1
    through 6) that has your desired radio station in
    memory.
    The display shows the band, preset number and frequency
    of the station selected.

    • If the
    indicator is illuminated, turn off the indicator by
    pressing FUNC./SETUP, and then you can perform the operation.

    Distance mode:
    Both strong and weak stations will be automatically tuned in
    (Automatic Seek Tuning).
    Local mode:
    Only strong stations will be automatically tuned in (Automatic
    Seek Tuning).
    Manual mode:
    The frequency is manually tuned in steps (Manual tuning).

    4

    Press

    or

    Holding down
    continuously.

    to tune in the desired station.
    or

    will change the frequency

    Presetting Stations Manually

    1
    2

    Select the radio band and tune in a desired radio
    station you wish to store in the preset memory.
    Press and hold, for at least 2 seconds, any one of the
    preset buttons (1 through 6) into which you wish
    to store the station.
    The selected station is stored.
    The display shows the band, preset number and station
    frequency memorized.

    • A total of 30 stations can be stored in the preset memory (6 stations
    for each band; FM1, FM2, FM3, MW and LW).
    • If you store a station in a preset memory which already has a station,
    the current station will be cleared and replaced with the new station.
    • If the
    indicator is illuminated, turn off the indicator by
    pressing FUNC./SETUP, and then you can perform the operation.

    7-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 9

    01GB00CDE-9870R.book Page 8 Wednesday, November 1, 2006 10:47 AM

    Recalling Preset RDS Stations

    RDS

    1
    /

    /ENT

    BAND/TA

    2
    3

    Press FUNC./SETUP so that the
    lights up.
    Press 1

    AUDIO/RTN

    1
    FUNC./SETUP

    Setting RDS Reception Mode and
    Receiving RDS Stations

    5

    2
    3
    4
    5

    Press FUNC./SETUP so that the
    lights up.
    Press 1
    Press
    station.
    Press 1

    • For presetting the RDS stations, refer to the Radio Operation section.
    The RDS stations can be preset in the F1, F2 and F3 bands only.
    • Operate the unit while the
    indicator lights up. If no operation
    is performed for 10 seconds, the
    indicator goes out.

    to tune in the desired RDS

    /AF again to deactivate the RDS mode.

    Press FUNC./SETUP to activate the normal mode.
    The

    If the preset station and the stations in the AF list
    cannot be received:

    indicator

    /AF to activate the RDS mode.
    or

    Make sure that the
    indicator light goes out,
    then press the preset button in which your desired
    RDS station is preset.

    When the PI SEEK setting is on (refer to “PI SEEK Setting”
    on page 9), the unit searches again for a station in the PI
    (Programme Identification) list.
    If there are still no stations receivable in the area, the unit
    displays the frequency of the preset station and the preset
    number disappears.
    If the signal level of the Regional (Local) station being tuned
    becomes too weak to receive, press the same preset button
    to tune in a Regional station in other district.

    The RDS (Radio Data System) is a radio information system using the
    57 kHz subcarrier of regular FM broadcast. The RDS allows you to
    receive a variety of information such as traffic information, station
    names, and to automatically re-tune to a stronger transmitter that is
    broadcasting the same programme.

    1

    indicator goes out.

    If the preset station’s signal is weak, the unit automatically
    searches and tunes to a stronger station in the AF
    (Alternative Frequencies) list.

    TITLE

    /AF

    /AF to activate the RDS mode.

    Press FUNC./SETUP to activate the normal mode.
    The

    4

    indicator

    indicator goes out.

    • Operate the unit while the
    indicator lights up. If no operation
    is performed for 10 seconds, the
    indicator goes out.
    The RDS digital data includes the following:
    PI
    Programme Identification
    PS
    Programme Service Name
    AF
    List of Alternative Frequencies
    TP
    Traffic Programme
    TA
    Traffic Announcement
    EON
    Enhanced Other Networks

    Receiving RDS Regional (Local)
    Stations

    1
    2
    3

    Press and hold FUNC./SETUP for at least 2
    seconds to activate the SETUP mode.
    Press
    or
    then press
    Press

    or

    /

    to select the REGIONAL mode, and
    /ENT.
    to select ON or OFF.

    In the OFF mode, the unit automatically keeps receiving the
    related local RDS station.

    4

    Press and hold FUNC./SETUP for at least 2
    seconds to return to normal mode.

    • Press AUDIO/RTN to return to the previous mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    8-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 10

    01GB00CDE-9870R.book Page 9 Wednesday, November 1, 2006 10:47 AM

    PI SEEK Setting

    1
    2
    3
    4

    Press and hold FUNC./SETUP for at least 2
    seconds to activate the SETUP mode.
    Press
    press

    or
    to select the PI SEEK mode, and then
    / /ENT.

    Press

    or

    Receiving Traffic Information While
    Playing CD or Radio

    1
    2

    to select ON or OFF.

    Press and hold BAND/TA for at least 2 seconds so
    that the “TA” indicator lights up.
    Press
    or
    to select a traffic information
    station if necessary.
    When a traffic information broadcast starts, the unit
    automatically mutes the CD player or the regular FM
    broadcast.
    When the traffic information broadcast finishes, the unit
    automatically returns to the original source play before the
    traffic information broadcast began.

    Press and hold FUNC./SETUP for at least 2
    seconds to return to normal mode.

    • Press AUDIO/RTN to return to the previous mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    When traffic information stations cannot be received:
    In the CD mode:
    When the TP signal can no longer be received, the traffic
    information station of another frequency will be selected
    automatically.

    Receiving Traffic Information

    1
    2

    Press and hold BAND/TA for at least 2 seconds so
    that the “TA” indicator lights up.
    Press
    or
    to select your desired traffic
    information station.
    When a traffic information station is tuned in, the “TP”
    indicator lights up.
    Traffic information is heard only when it is being broadcast.
    If traffic information is not being broadcast, the unit is set in
    the standby mode. When a traffic information broadcast
    begins, the unit automatically receives it and the display
    shows “TRF-INFO” for 5 seconds.
    When the traffic information broadcast is over, the unit will
    automatically set in the standby mode.

    • If you do not want to listen to the traffic information being received,
    lightly press BAND/TA to skip that traffic information message. The
    TA mode will remain in the ON position to receive the next traffic
    information message.
    • If the volume level is changed while receiving traffic information, the
    changed volume level will be memorized. When traffic information is
    received next time, the volume level will be automatically adjusted to
    the level memorized.
    • In the TA mode, the SEEK tuning selects only the TP stations.

    • The receiver is equipped with the EON (Enhanced Other Networks)
    function in order to keep track of additional alternate frequencies to
    the AF list. The “EON” indicator lights up while an RDS EON
    station is being received. If the station being received does not
    broadcast the traffic information, the receiver automatically tunes in
    the related station that broadcasts the traffic information when it
    occurs.

    3

    Press and hold BAND/TA for at least 2 seconds to
    deactivate the Traffic Information mode.
    The “TA” indicator goes out.

    Displaying Radio Text
    Text messages from a radio station can be displayed.

    Press TITLE while receiving FM in the radio mode to
    select the Radio Text display.
    The display will change every time the button is pressed.
    If there is PS (Programme Service Name):
    PS (Programme Service Name)*
    RADIO TEXT
    PS (Programme Service Name)

    * If TITLE is pressed and held for at least 2 seconds while displaying
    PS in the radio mode, frequency will be displayed for 5 seconds.
    If there is no PS (Programme Service Name):
    FREQUENCY
    RADIO TEXT
    FREQUENCY

    The display shows “WAITING” for a few seconds, then starts
    scrolling the text message.
    • If there is no receivable text message or the unit cannot receive a text
    message properly, the display shows “NO TEXT”.

    9-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 11

    01GB00CDE-9870R.book Page 10 Wednesday, November 1, 2006 10:47 AM

    5

    CD/MP3
    /

    /ENT

    /ESC

    To eject the disc, press

    .

    • Do not remove a CD during its eject cycle. Do not load more than
    one disc at a time. A malfunction may result from doing either.
    • If the CD does not eject, press and hold
    for at least 2 seconds.
    • The “DISC IN” indicator lights up when a disc is inserted.
    • The CD-player can play discs containing audio data and MP3 data.
    • The track display for MP3 data playback is the file numbers recorded
    on the disc.
    • The playback time may not be correctly displayed when a VBR
    (Variable Bit Rate) recorded file is played back.

    SOURCE/

    MP3 Play Display
    The folder number and file number will be displayed as
    described below.
    4 5
    1

    AUDIO/RTN

    /AF

    TITLE

    F101 T103

    2

    Playback

    1

    Folder number
    display

    File number
    display

    Insert a disc with the label side facing up.
    The disc will be pulled into the unit automatically, and the
    “DISC IN” indicator lights up.

    • Press TITLE to switch the display. See “Displaying the Text”
    (page 15) for information about display switching.

    Repeat Play
    4 to play back repeatedly the track being

    Press
    played.

    The track (file) will be played repeatedly.
    When a disc is already inserted, press SOURCE/
    switch to the DISC mode.

    to

    Press

    4 again and select off to deactivate repeat play.

    CD mode :

    The mode will change every time the button is pressed.
    TUNER

    DISC

    iPod*

    : Only a track is repeatedly played back.

    TUNER

    * Only when the iPod is connected.

    2

    While playing back MP3, press 1 /AF or
    select the desired folder.
    Pressing and holding 1
    continuously.

    3

    Press

    or

    /AF or

    2 will change folders

    to select the desired track (file).

    Returning to the beginning of the current track (file):
    Press
    .
    Fast backward:
    Press and hold

    2 to
    MP3 mode :

    : Only a file is repeatedly played back.
    : Only files in a folder are repeatedly played back.

    .

    Advancing to the beginning of the next track (file):
    Press
    .
    Fast forward:
    Press and hold

    4

    .

    To pause playback, press
    Pressing

    /

    /

    /ENT.

    /ENT again will resume playback.

    10-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 12

    01GB00CDE-9870R.book Page 11 Wednesday, November 1, 2006 10:47 AM

    M.I.X. (Random Play)
    Press 5

    in the play or pause mode.

    The tracks (files) on the disc will be played back in random
    sequence.
    To cancel M.I.X. play, press 5

    again.

    CD mode :

    File/Folder Name Search
    (concerning MP3)
    Folder and file names may be searched and displayed during playback.

    1
    2

    : The tracks are played back in random
    sequence.

    During MP3 playback, press
    search mode.

    /ESC to activate the

    Press
    or
    to select Folder Name Search mode or
    File Name Search mode, and then press / /ENT.

    Folder Name Search mode

    3
    4

    MP3 mode :

    : Only files in a folder are played back in
    random sequence.
    : The files are played back in random
    sequence.

    Press

    or

    to select the desired folder.

    Press and hold / /ENT for at least 2 seconds to
    play back the first file in the selected folder.

    • Press and hold
    /ESC for at least 2 seconds in the search mode to
    cancel. Or, the search mode is cancelled if no operation is performed
    for 10 seconds.
    • To search for files in the Folder Name Search mode, press
    / /ENT. Files in the folder may be searched.
    • Press AUDIO/RTN to exit Folder Name Search mode in step 3 in
    order to select File Name Search mode.
    • The root folder is displayed as “
    ”.
    • Folder Name Search cannot be made during M.I.X. play.

    Searching from CD Text

    File Name Search mode

    Tracks can be searched and played by using the CD text on the disc. In
    the case of discs that do not support text, searches can be made by using
    the track numbers.

    3
    4
    5

    1

    Press

    /ESC during play.

    This will set the search mode.

    2

    Press
    press

    or
    /

    to select the desired track, and then
    /ENT.

    This will play the selected track.

    Press 1

    /AF or

    2 to select another Folder.

    Select the desired file by pressing
    Press

    /

    or

    .

    /ENT to play back the selected file.

    • Press and hold
    /ESC for at least 2 seconds in the search mode to
    cancel. Or, the search mode is cancelled if no operation is performed
    for 10 seconds.
    • Press AUDIO/RTN in the search mode to return to the previous
    mode.
    • File Name Search cannot be made during M.I.X. play.

    • Press and hold
    /ESC for at least 2 seconds in the search mode to
    cancel. Or, the search mode is cancelled if no operation is performed
    for 10 seconds.
    • CD text search cannot be made during M.I.X. play.

    11-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 13

    01GB00CDE-9870R.book Page 12 Wednesday, November 1, 2006 10:47 AM

    About MP3
    CAUTION

    Except for private use, duplicating audio data (including MP3
    data) or distributing, transferring, or copying it, whether for free
    or for a fee, without permission of the copyright holder is strictly
    prohibited by the Copyright Act and by international treaty.
    What is MP3?
    MP3, whose official name is “MPEG-1 Audio Layer 3”, is a
    compression standard prescribed by the ISO, the International
    Standardization Organization and MPEG which is a joint activity
    institution of the IEC.
    MP3 files contain compressed audio data. MP3 encoding is
    capable of compressing audio data at extremely high ratios,
    reducing the size of music files to as much as one-tenth their
    original size. This is achieved while still maintaining near CD
    quality. The MP3 format realises such high compression ratios
    by eliminating the sounds that are either inaudible to the human
    ear or masked by other sounds.
    Method for creating MP3 files
    Audio data is compressed by using MP3 specified software. For
    details on creating MP3 files, refer to the user’s manual for that
    software.
    MP3 files that can be played back by this device have the file
    extension “mp3”. Files with no extension cannot be played
    back.
    Supported playback sampling rates and bit rates
    MP3
    Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
    16 kHz, 12 kHz, 11.025 kHz, 8 kHz
    8 - 320 kbps
    Bit rates:

    Media supported
    The media that this device can play back are CD-ROMs, CD-Rs,
    and CD-RWs.
    Corresponding File Systems
    This device supports discs formatted with ISO9660 Level 1 or
    Level 2.
    Under the ISO9660 standard, there are some restrictions to
    remember.
    The maximum nested folder depth is 8 (including the root
    directory). The number of characters for a folder/file name is
    limited.
    Valid characters for folder/file names are letters A-Z (all caps),
    numbers 0-9, and ‘_’ (underscore).
    This device also can play back discs in Joliet, Romeo, etc., and
    other standards that conform to ISO9660. However, sometimes
    the file names, folder names, etc., are not displayed correctly.
    Formats supported
    This device supports CD-ROM XA, Mixed Mode CD, Enhanced
    CD (CD-Extra) and Multi-Session.
    This device cannot correctly play back discs recorded with
    Track At Once or packet writing.
    Order of files
    Files are played back in the order that the writing software writes
    them to the disc. Therefore, the playback order may not be what
    is expected. Verify the writing order in the software’s
    documentation. The playback order of the folders and files is as
    follows.

    Root folder

    This device may not play back correctly depending on sampling
    rates.
    ID3 tags
    This device supports ID3 tag v1 and v2. If tag data is in an MP3
    file, this device can display the title (track title), artist name, and
    album name ID3 tag data.
    This device can only display single-byte alphanumeric
    characters (up to 30 for ID3 tags) and the underscore. For nonsupported characters, “NO SUPPORT” is displayed.
    The tag information may not be correctly displayed, depending
    on the contents.
    Producing MP3 discs
    MP3 files are prepared, then written to a CD-R or CD-RW using
    CD-R writing software. A disc can hold up to 510 files/folders
    (including Root Folders), and the maximum number of folders is
    255.
    Playback may not be performed if a disc exceeds the limitations
    described above.

    Folder

    MP3 File

    * The folder No./folder Name will not be displayed if no file is
    contained in the folder.

    12-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 14

    01GB00CDE-9870R.book Page 13 Wednesday, November 1, 2006 10:47 AM

    Terminology
    Bit rate

    Sound Setting

    This is the “sound” compression rate specified for encoding. The
    higher the bit rate, the higher the sound quality, but also the larger
    the files.

    /ESC

    SOURCE/

    BAND/TA

    Sampling rate

    This value shows how many times per second the data is sampled
    (recorded). For example, music CDs use a sampling rate of 44.1 kHz,
    so the sound is sampled (recorded) 44,100 times per second. The
    higher the sampling rate, the higher the sound quality, but also the
    larger the volume of data.
    Encoding

    Converting music CDs, WAVE (AIFF) files, and other sound files into
    the specified audio compression format.
    Tag

    Song information such as track titles, artist names, album names,
    etc., written into MP3 files.
    MP3: ID3 tag
    Root folder

    The root folder (or root directory) is found at the top of the file
    system. The root folder contains all folders and files. It is created
    automatically for all burned discs.

    AUDIO/RTN/A.SEL

    Adjusting Bass/Treble/Balance (Between
    Left and Right)/Fader (Between Front
    and Rear)/Loudness/Defeat

    1

    Press AUDIO/RTN repeatedly to choose the desired
    mode.
    Each press changes the mode as follows:
    SUBW*1
    BASS
    TREBLE
    BAL
    DEFEAT
    VOLUME
    SUBW

    FADER

    LOUD*2

    Subwoofer : 0 ~ +15
    Bass level: –7 ~ +7
    Treble level: –7 ~ +7
    Balance : L15 ~ R15
    Fader : R15 ~ F15
    Loudness : ON/OFF
    Defeat : ON/OFF
    Volume : 0 ~ 35

    • If no operation is performed for 5 seconds after selecting the SUBW,
    BASS, TREBLE, BAL, FADER, LOUD or DEFEAT mode, the unit
    automatically returns to normal mode.
    *1 When the subwoofer mode is set to OFF, its level cannot be adjusted.
    *2 Loudness introduces a special low- and high-frequency emphasis at
    low listening levels. This compensates for the ear’s decreased
    sensitivity to bass and treble sound. The function is inoperable when
    DEFEAT is set to ON.

    2

    Press
    or
    each mode.

    until the desired sound is obtained in

    By setting Defeat ON, previously adjusted settings of BASS
    and TREBLE will return to the factory defaults.

    13-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 15

    01GB00CDE-9870R.book Page 14 Wednesday, November 1, 2006 10:47 AM

    Setting the Bass Control

    Setting the Treble Control

    You can change the Bass Frequency emphasis to create your own tonal
    preference.

    You can change the Treble Frequency emphasis to create your own tonal
    preference.

    1

    1

    2

    Press and hold A.SEL for at least 2 seconds to
    activate the Sound Setting mode.
    Press A.SEL repeatedly to select the BASS mode.
    BASS

    TREBLE

    HPF

    2

    BASS

    Press A.SEL repeatedly to select the TREBLE mode.
    BASS

    Setting the Bass Centre Frequency

    3-1 Press BAND/TA to select the desired bass centre

    TREBLE

    HPF

    BASS

    Setting the Treble Centre Frequency

    3-1 Press BAND/TA to select the desired treble centre

    frequency.
    80 Hz

    Press and hold A.SEL for at least 2 seconds to
    activate the Sound Setting mode.

    frequency.

    100 Hz

    200 Hz

    60 Hz

    80 Hz

    10.0 kHz

    Emphasizes the displayed bass frequency ranges.

    Setting the Bass Bandwidth

    3-2 Press SOURCE/

    to select the desired bass

    12.5 kHz

    15.0 kHz

    17.5 kHz

    10.0 kHz

    Emphasizes the displayed treble frequency ranges.

    Setting the Treble Level

    3-2* Press
    2

    bandwidth.

    or

    to select the desired treble level

    (–7~+7).
    You can emphasize the treble level.

    4
    Changes the boosted bass bandwidth to wide or narrow. A
    wider setting will boost a wide range of frequencies above
    and below the centre frequency. A narrower setting will
    boost only frequencies near the centre frequency.

    Setting the Bass Level

    3

    -3*1Press

    or

    to select the desired bass level

    (–7~+7).

    Press and hold
    /ESC for at least 2 seconds to
    return to normal mode.

    • If no operation is performed for 15 seconds, the unit will return to
    normal mode automatically.
    • The treble level settings will be individually memorized for each
    source (FM, MW (LW), CD, etc.) until the setting is changed. The
    Treble frequency settings adjusted for one source are effective for all
    other sources (FM, MW (LW), CD, etc.).
    • The function is inoperable when DEFEAT is set to ON.
    *2 The adjustment can also be made by pressing AUDIO/RTN. Refer to
    “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
    (Between Front and Rear)/Loudness/Defeat” (page 13).

    You can emphasize or weaken the bass level.

    4

    Press and hold
    /ESC for at least 2 seconds to
    return to normal mode.

    • If no operation is performed for 15 seconds, the unit will return to
    normal mode automatically.
    • The bass level settings will be individually memorized for each
    source (FM, MW (LW), CD, etc.) until the setting is changed. The
    bass frequency and bass bandwidth settings adjusted for one source
    are effective for all other sources (FM, MW (LW), CD, etc.).
    • The function is inoperable when DEFEAT is set to ON.
    *1 The adjustment can also be made by pressing AUDIO/RTN. Refer to
    “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
    (Between Front and Rear)/Loudness/Defeat” (page 13).

    14-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 16

    01GB00CDE-9870R.book Page 15 Wednesday, November 1, 2006 10:47 AM

    Adjusting the High Pass Filter

    Other Functions

    The High Pass Filter on this unit can be adjusted to suit your personal
    taste.

    1
    2

    Press and hold A.SEL for at least 2 seconds to
    activate the Sound Setting mode.
    Press A.SEL repeatedly to select the HPF mode.
    BASS

    3

    Press
    OFF

    4

    TREBLE

    or
    80 Hz

    HPF

    BASS

    to select the desired HPF frequency.
    120 Hz

    TITLE

    160 Hz

    Press and hold
    /ESC for at least 2 seconds to
    return to normal mode.

    • If no operation is performed for 15 seconds, the unit will return to
    normal mode automatically.
    • The function is inoperable when DEFEAT is set to ON.

    Displaying the Text
    Text information, such as the disc name and the track name, will be
    displayed if playing a CD text compatible disc. It is also possible to
    display the folder name, the file name and the tag, etc., while playing
    MP3 files.

    Press TITLE.
    The display will change every time the button is pressed.
    • If you want to change the display when the text scroll is set to MANU,
    press TITLE while the text is scrolling. If the scroll has been
    completed, press TITLE to scroll the text again.
    The display in Radio mode:
    If there is PS (Programme Service Name)
    PS (Programme Service Name)*1
    PS (Programme Service Name)

    RADIO TEXT

    If there is no PS (Programme Service Name)
    FREQUENCY

    RADIO TEXT

    FREQUENCY

    The display in CD mode:
    TRACK NO./ELAPSED TIME
    TEXT (DISC NAME)*2
    TEXT (TRACK NAME)*2
    TRACK NO./ELAPSED TIME
    The display in MP3 mode:
    FILE NO./ELAPSED TIME
    FOLDER NO./FILE NO.
    FOLDER NAME
    FILE NAME
    ARTIST NAME*3
    3
    ALBUM NAME*
    SONG NAME*3
    FILE NO./ELAPSED
    TIME

    *1 If TITLE is pressed and held for at least 2 seconds in the PS display
    mode, frequency will be displayed for 5 seconds.
    *2 Displayed during playback of a disc with CD text.
    3
    * ID3 tag
    If an MP3 file contains ID3 tag information, the ID3 tag information
    is displayed (e.g., song name, artist name, and album name). All
    other tag data is ignored.

    15-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 17

    01GB00CDE-9870R.book Page 16 Wednesday, November 1, 2006 10:47 AM

    About the indication display

    SETUP

    When displaying Text, the following indicators are lit
    according to the mode.
    Indicator/
    Mode

    CD Mode

    MP3 Mode

    iPod Mode



    Folder Name*2
    being displayed



    1



    You can flexibly customize the unit to suit your own preferences and
    usage. From the SETUP menu, Sound Customizing, Visual
    Customizing, etc., can be modified.

    /

    /ENT
    SOURCE/

    1

    Artist Name*
    Artist Name*
    being displayed being displayed

    Text (Disc
    Name*3) being
    displayed

    Album Name*1 Album Name*1
    being displayed being displayed

    Text (Track
    Name*3) being
    displayed

    Song Name*1/ Song Name*1
    File Name being being displayed
    displayed

    *1 Tag information
    If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is
    displayed.
    *2 The root folder is displayed as “FOLDER”.
    *3 If there is no Text (Disc Name or Track Name), “DISC TEXT”/
    “TRACK TEXT” is displayed.

    FUNC./SETUP
    AUDIO/RTN

    Use steps 1 to 4 to select one of the SETUP modes to
    modify. See the applicable section below for details
    about the selected SETUP item.

    1
    2

    Press and hold FUNC./SETUP for at least 2
    seconds to activate the SETUP mode.
    Press
    or
    to select the desired SETUP menu,
    and then press / /ENT.
    (e.g. Select SUBWOOFER)
    FM-LEVEL
    REGIONAL*1
    PI SEEK*2
    SUBWOOFER
    (SUBW SYS)*3
    PLAY MODE
    SCROLLTYPE
    TEXT SCR
    POWER IC
    AUX+ SETUP
    DEMO
    FM-LEVEL

    *1 Refer to “Receiving RDS Regional (Local) Stations” (page 8).
    *2 Refer to “PI SEEK Setting” (page 9).
    *3 Displayed only when SUBW is ON.

    3

    Press

    or

    to change the setting.

    (e.g. Select SUBW ON or SUBW OFF.)

    4

    Press and hold FUNC./SETUP for at least 2
    seconds to return to normal mode.

    • Press AUDIO/RTN to return to the previous mode.
    • If no operation is performed for 60 seconds, the unit will return to
    normal mode automatically.

    Sound Customizing
    Adjusting Source Signal Levels
    FM-LV HI (Initial setting) / FM-LV LOW

    If the difference in volume level between the CD player and FM radio is
    too great, adjust the FM signal level.

    16-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 18

    01GB00CDE-9870R.book Page 17 Wednesday, November 1, 2006 10:47 AM

    Subwoofer On and Off

    MP3

    SUBW ON (Initial setting) / SUBW OFF

    When the subwoofer is on, perform the steps below to adjust the
    subwoofer output level.
    1 In the normal mode, press AUDIO/RTN repeatedly to
    select the SUBW mode.
    SUBW
    BASS
    TREBLE
    BAL
    DEFEAT
    VOLUME
    SUBW

    2 Adjust the level by pressing

    or

    FADER

    LOUD

    .

    Setting the Subwoofer System
    SUBW SYS 1 (Initial setting) / SUBW SYS 2

    Select either SYS 1 or SYS 2 for the desired subwoofer effect.
    SUBW SYS 1: Subwoofer level changes according to the main
    volume setting.
    SUBW SYS 2: Subwoofer level change is different from the main
    volume setting. For example, even at low volume
    settings, the subwoofer is still audible.

    Playing MP3 Data (PLAY MODE)
    CD-DA (Initial setting) / CDDA/MP3

    This unit can play back CDs containing both CD and MP3 data (created
    in Enhanced CD (CD Extra) format). However, in some situations,
    playback of an enhanced CD may be difficult. In this case, you can
    select playback of a single session only, containing the CD data. When a
    disc contains both CD and MP3 data, playback starts from the CD data
    portion of the disc.
    CD-DA:
    CDDA/MP3:

    Only the CD data in Session 1 can be played
    back.
    CD data, MP3 files in mixed mode, and multisession discs can be played back.

    • Perform this setting before inserting a disc. If a disc has already been
    inserted, remove it first.

    External Device

    Visual Customizing
    Connecting to an External Amplifier (POWER IC)
    Scroll Type Setting
    SCR TYPE1 / SCR TYPE2 (Initial setting)

    Choose from two scrolling methods.
    Select the type you prefer.
    SCR TYPE1:
    SCR TYPE2:

    POW ON (Initial setting) / POW OFF

    When an external amplifier is connected, sound quality can be improved
    by stopping the power supply of the built-in amplifier.
    Use this mode when the line output of this unit is
    used to drive an external amplifier. In this
    setting, the head unit’s internal amplifier is
    turned OFF and cannot drive speakers.

    POW OFF:

    The characters scroll from right to left, a single
    character at a time.
    Words are built up from left to right, a single
    character at a time. When the display is filled,
    it is cleared and the remaining words are
    displayed the same way until all words of the
    title have been shown.

    Front
    left

    Amplifier

    Front
    right

    Scroll Setting (TEXT SCR)
    SCR AUTO / SCR MANU (Initial setting)

    This CD player can scroll the disc and track names recorded on CDTEXT discs, as well as the text information of MP3 files, folder names
    and tags.
    SCR AUTO:

    SCR MANU:

    The CD text information, the text information of
    folder and file names, and the tags are
    scrolled automatically.
    The display is scrolled when a disc is loaded
    or when a track is changed, etc.

    • The unit scrolls CD text names, folder names, file names or tag
    display.

    The speakers are driven by the built-in
    amplifier.

    POW ON:

    Speakers
    SPEAKER
    RIGHT FRONT

    SPEAKER
    RIGHT REAR

    Front
    right

    Rear
    right

    Demonstration
    DEMO ON / DEMO OFF (Initial setting)

    This unit has a demonstration feature for the display.

    SPEAKER
    LEFT REAR

    • To quit Demo mode, set to DEMO OFF.
    SPEAKER
    LEFT FRONT

    Rear
    left

    Front
    left

    • No sound is produced by the system when the power output is set to
    OFF.

    17-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 19

    01GB00CDE-9870R.book Page 18 Wednesday, November 1, 2006 10:47 AM

    Setting the AUX+ Mode
    AUX+ ON / AUX+ OFF (Initial setting)

    You can input the audio of a connected external device, (such as a
    portable player) to the iPod Direct connector of this unit, using an
    iPod Direct/RCA Interface cable.
    An external device and an iPod cannot be connected at the same time.
    AUX+ ON:

    AUX+ OFF:

    iPod ® (Optional)
    1

    /ESC
    /

    2

    /AF

    /ENT

    Set to ON when an external device is connected.
    If SOURCE/ is pressed and AUX+ is selected,
    the sound of the external device is input to the
    unit.
    Set to OFF when an iPod is connected.

    4 5

    SOURCE/

    Preset buttons
    (1 through 6)

    AUDIO/RTN

    6

    TITLE

    An iPod® can be connected to this unit by using the proprietary
    ALPINE FULL SPEED™ Connection Cable (KCE-422i) (sold
    separately). When this unit is connected by using the cable, the controls
    on the iPod are not functional.
    • Set AUX+ SETUP to OFF when an iPod is connected (refer to
    “Setting the AUX+ Mode” on page 18).

    iPods usable with this unit
    • The unit can be used with the fourth generation and above
    iPod, iPod photo, iPod minis or iPod nano. iPod Shuffle
    cannot be used, however.
    • Touch wheel or scroll wheel type iPods without the dock
    connector cannot be connected to the unit.
    • The unit can be used with the following iPod versions.
    Correct function of earlier versions cannot be guaranteed.
    Fourth generation iPod: Ver. 3.1.1
    Fifth generation iPod: Ver.1.1.2
    iPod photo: Ver.1.2.1
    iPod mini: Ver. 1.4.1
    iPod nano: Ver. 1.2

    • The unit cannot be used with software versions earlier than
    “2006-06-28”. For details about “iPod Software Update”, refer
    to the iPod Instruction Manual.

    Playback

    1
    2

    Press SOURCE/

    to switch to the iPod mode.

    Press

    to select the desired song.

    or

    Return to the beginning of the current song:
    Press
    .
    Fast backward of the current song:
    Press and hold
    .
    Advance to the beginning of the next song:
    Press
    .
    Fast forward of the current song:
    Press and hold
    .

    3

    To pause playback, press
    Pressing

    /

    /

    /ENT.

    /ENT again will resume playback.

    • A song playing on the iPod while it is connected to this unit will
    continue to play from where it was paused after disconnection.

    18-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 20

    01GB00CDE-9870R.book Page 19 Wednesday, November 1, 2006 10:47 AM

    Searching for a desired Song

    Direct Search Function

    An iPod can contain hundreds of songs. By using file tag information
    and keeping these songs organised in playlists, this unit’s search
    functions will ease song searches.
    Each music category has its own individual hierarchy. Use the Playlist/
    Artist/Album/Song/Podcast/Genre/Composer search mode to narrow
    searches based on the table below.

    The unit’s direct search function can be used to search for an album,
    song, etc., more efficiently. In Playlist/Artist/Album/Song/Podcast/
    Genre/Composer mode, you can quickly target any song.

    Hierarchy 1

    Hierarchy 2

    Hierarchy 3

    Hierarchy 4

    Playlist

    Song





    Artist*

    Album*

    Song



    Album*

    Song





    Song







    Podcast

    Episode





    Genre*

    Artist*

    Album*

    Song

    Composer*

    Album*

    Song



    For example: Searching by Artist name
    The following example explains how an ARTIST search is performed.
    Another search mode can be used for the same operation, although the
    hierarchy differs.

    1
    2

    Press

    /ESC to activate the search selection mode.

    Press
    and
    to select the ARTIST search mode,
    and then press / /ENT.
    PLAYLIST
    GENRE

    3
    4
    5

    ARTIST
    ALBUM
    SONG
    COMPOSER
    PLAYLIST

    In the search mode, press any one of the preset
    buttons (1 through 6) to quickly skip over a
    designated percent of your song content.
    Song search example:
    If there are 100 songs in your iPod, they are divided into 6
    groups using percentages (shown below). These groups are
    assigned to the preset buttons (1 through 6).
    Example 1:
    Suppose the song you are searching for is located at around
    the middle (50%) of your library: press button 4 to jump to the
    50th song and press
    or
    to find the desired song.
    Example 2:
    Suppose the song you are searching for is located near the
    end (83%) of your library: press button 6 to jump to the 83rd
    song and press
    or
    to find the desired song.
    All 100 songs (100%)
    17%
    33%
    50%
    67%

    0%

    83%

    Preset
    buttons

    1

    2

    3

    4

    5

    6

    Songs

    First
    song

    17th
    song

    33rd
    song

    50th
    song

    67th
    song

    83rd
    song

    PODCAST

    Select Playlist/Artist/Album/Podcast/
    Genre/Composer

    Press
    press

    and
    to select the desired Artist, and then
    / /ENT.

    Press
    press

    and
    to select the desired Album, and then
    / /ENT.

    Playlist/Artist/Album/Podcast/Genre/Composer can be easily changed.
    For example, if you listen to a song from a selected album, the album
    can be changed.

    Press
    press

    and
    to select the desired Song, and then
    / /ENT.

    Press 1 /AF or 2 to select the desired Playlist/Artist/
    Album/Podcast/Genre/Composer.

    • After pressing and holding / /ENT for at least 2 seconds while
    in each hierarchy (except SONG hierarchy), all songs of the selected
    hierarchy are played back.
    • After selecting [ALL] in the search mode with “*”, press and hold
    / /ENT for at least 2 seconds to play back all songs in the iPod
    or selected search mode.
    • While in the search mode, if you press and hold
    /ESC for 2
    seconds, or no operation is performed for 10 seconds, the search
    mode is cancelled.
    • In the search mode, pressing AUDIO/RTN will return to the previous
    mode.
    • Search cannot be made during M.I.X. play.
    • “NO SONG” will be displayed if there are no songs in the selected
    playlist in the PLAYLIST search mode.
    • “NO PODCAST” will be displayed if there is no podcast data in the
    iPod in the PODCAST search mode.
    • If “iPod name” stored in the iPod is selected in the desired Playlist
    search mode, and / /ENT is pressed, you can search for all
    songs in the iPod. Also, if you press and hold / /ENT for at least
    2 seconds, all songs in the iPod are played back.
    • Depending on the iPod, podcast search is not supported.
    • If any one of the preset buttons (1 through 6) is pressed in the search
    mode, a search can be made quickly by skipping to the specified
    location. For details, refer to “Direct Search Function” on page 19.

    • If the song search mode was used to select a song, this function is
    inactive.
    • If an album is selected during an artist search, other albums by that
    artist are searchable.
    • This function is inactive during shuffle (M.I.X.) playback.

    19-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 21

    01GB00CDE-9870R.book Page 20 Wednesday, November 1, 2006 10:47 AM

    Random Play Shuffle (M.I.X.)

    Repeat Play

    The Shuffle function of the iPod is displayed as M.I.X. on this unit.

    Only Repeat One is available for the iPod.

    Shuffle Albums:

    Repeat One:

    The songs on each album are played back in proper order. Upon
    completion of all the songs on the album, the next album is
    selected randomly. This continues until all albums have been
    played.

    A single song is repeatedly played back.

    1

    1

    Press 5

    .

    RPT
    (Repeat One)

    2

    M.I.X.
    (Shuffle Songs)

    (off)

    To cancel M.I.X. play, select (off) with the above
    procedure.

    Shuffle ALL:
    Shuffle ALL plays all songs in the iPod randomly. Any one song
    does not play back again until all songs have been played back.

    Press 6.
    The songs are played back in random sequence.
    M.I.X.
    (Shuffle ALL)

    2

    (off)

    RPT

    To cancel repeat play, select (off) with the above
    procedure.

    M.I.X.

    • If a song is selected in the album search mode before selecting M.I.X.
    play, the songs will not play back randomly even when Shuffle
    Albums is selected.

    1

    2

    (off)

    • During repeat playback, no other songs are selectable by pressing
    or
    .

    The songs are played back in random sequence.
    M.I.X.
    (Shuffle Albums)

    4.

    The song is played back repeatedly.

    Shuffle Songs:
    Song shuffle randomly plays back songs within a selected
    category (playlist, album, etc.). The songs within the category
    are played just once until all songs have been played.

    Press

    M.I.X.

    To cancel M.I.X. play, select (off) with the above
    procedure.

    • If Shuffle ALL is selected, the selected songs being played back in the
    search mode are cancelled.

    Displaying the Text
    You can display the tag information of a song in the iPod.

    Press TITLE.
    Each press changes the display.
    • If you want to change the display when the text scroll is set to MANU,
    press TITLE while the text is scrolling. If the scroll has been
    completed, press TITLE to scroll the text again.
    TRACK NO./ELAPSED TIME
    ARTIST NAME*
    ALBUM NAME*
    SONG TITLE*
    TRACK NO./ELAPSED
    TIME
    * TAG information
    “ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
    information.
    • Only alphanumeric characters (ASCII) can be displayed.
    • If the artist, album or song name, created in iTunes, has too many
    characters, songs may not be played back when connected to the
    adapter. Therefore, a maximum of 250 characters is recommended.
    The maximum number of characters for the head unit is 64
    (64 byte).
    • Some characters may not be correctly displayed.
    • “NO SUPPORT” is displayed if text information is not supported by
    the unit.

    20-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 22

    01GB00CDE-9870R.book Page 21 Wednesday, November 1, 2006 10:47 AM

    Information
    In Case of Difficulty
    If you encounter a problem, please turn the power off, then on again. If
    the unit is still not functioning normally, please review the items in the
    following checklist. This guide will help you isolate the problem if the
    unit is at fault. Otherwise, make sure the rest of your system is properly
    connected or consult your authorized Alpine dealer.

    Basic
    No function or display.
    • Vehicle’s ignition is off.
    - If connected following instructions, the unit will not operate
    with the vehicle’s ignition off.
    • Improper power lead (Red) and battery lead (Yellow)
    connections.
    - Check power lead and battery lead connections.
    • Blown fuse.
    - Check the fuse of the unit; replace with the proper value if
    necessary.
    • Internal micro-computer malfunctioned due to interference noise
    etc.
    - Press the RESET switch with a ballpoint pen or other pointed
    article.

    Radio
    Unable to receive stations.
    • No antenna or open connection in cable.
    - Make sure the antenna is properly connected; replace the
    antenna or cable if necessary.
    Unable to tune stations in the seek mode.
    • You are in a weak signal area.
    - Make sure the tuner is in the DX mode.
    • If the area you are in is a primary signal area, the antenna may
    not be grounded and connected properly.
    - Check your antenna connections; make sure the antenna is
    properly grounded at its mounting location.
    • The antenna may not be the proper length.
    - Make sure the antenna is fully extended; if broken, replace the
    antenna with a new one.
    Broadcast is noisy.
    • The antenna is not the proper length.
    - Extend the antenna fully; replace it if it is broken.
    • The antenna is poorly grounded.
    - Make sure the antenna is grounded properly at its mounting
    location.

    CD
    CD Player not functioning.
    • Out of operating temperature range +50°C (+120°F) for CD.
    - Allow the vehicle’s interior (or trunk) temperature to cool.
    CD playback sound is wavering.
    • Moisture condensation in the CD Module.
    - Allow enough time for the condensation to evaporate (about 1
    hour).
    CD insertion not possible.
    • A CD is already in the CD player.
    - Eject the CD and remove it.
    • The CD is being improperly inserted.
    - Make sure the CD is being inserted following instructions in
    the CD Player Operation section.
    Unable to fast forward or backward the CD.
    • The CD has been damaged.
    - Eject the CD and discard it; using a damaged CD in your unit
    can cause damage to the mechanism.
    CD playback sound skips due to vibration.
    • Improper mounting of the unit.
    - Securely re-mount the unit.
    • The disc is very dirty.
    - Clean the disc.
    • The disc has scratches.
    - Change the disc.
    • The pick-up lens is dirty.
    - Do not use a commercially available lens cleaner disc. Consult
    your nearest Alpine dealer.
    CD playback sound skips without vibration.
    • The disc is dirty or scratched.
    - Clean the disc; damaged disc should be replaced.
    Error displays (built-in CD player only).
    • Mechanical error.
    - Press . After the error indication disappears, insert the disc
    again. If the above-mentioned solution does not solve the
    problem, consult your nearest Alpine dealer.
    CD-R/CD-RW playback not possible.
    • Close session (finalization) has not been performed.
    - Perform finalization and attempt playback again.

    MP3
    MP3 is not played back.
    • Writing error occurred. The CD format is not compatible.
    - Make sure the CD has been written in a supported format.
    Refer to “About MP3” (pages 12-13), then rewrite in the
    format supported by this device.

    21-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 23

    01GB00CDE-9870R.book Page 22 Wednesday, November 1, 2006 10:47 AM

    Audio
    The sound is not output from the speakers.
    • Unit has no output signal of the internal amplifier.
    - POWER IC is switched to “POW ON” (page 17).

    iPod
    iPod does not play and no sound is output.
    • The iPod has not been recognized.
    - Reset this unit and the iPod. Refer to “Initial System Start-Up”
    (page 6). To reset the iPod, refer to the Owner’s Manual of the
    iPod.

    Indication for CD Player

    • Protective circuit is activated due to high temperature.
    - The indication will disappear when the temperature returns to
    normal operating range.

    • No CD is inserted.
    - Insert a CD.
    • Although a disc is inserted, “NO DISC” is displayed and the unit
    does not start to play or eject the disc.
    - Remove the disc by following these steps:
    Press the
    button again for at least 2 seconds.
    If the disc still does not eject, consult your Alpine dealer.

    Indication for iPod Mode

    • The iPod is not connected.
    - Make sure the iPod is correctly connected (refer to
    “Connections”).
    Make sure the cable is not bent excessively.

    • There are no songs in the iPod.
    - Download songs to the iPod and connect to this unit.

    • There is no podcast data in the iPod.
    - Download podcast data to the iPod and connect to this unit.

    • Communication error.
    - Turn the ignition key off, and then set to ON again.
    - Check the display by reconnecting between the iPod and this
    unit, using the iPod cable.

    • Caused by the iPod Software Version not being compatible with
    this unit.
    - Update the iPod Software Version to be compatible with this
    unit.

    • Mechanism error.
    1) Press the
    button and eject the CD.
    If not ejecting, consult your Alpine dealer.
    2) When the error indication remains after ejecting, press the
    button again.
    If the error indication still does not turn off after pressing the
    button for a few times, consult your Alpine dealer.
    • When “ERROR” is displayed:
    If the disc cannot be ejected by pressing , press the RESET switch
    (refer to page 6) and press
    again.
    If the disc still cannot be ejected, consult your Alpine dealer.

    • A sampling rate/bit rate not supported by the unit is used.
    - Use a sampling rate/bit rate that is supported by the unit.

    22-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 24

    01GB00CDE-9870R.book Page 23 Wednesday, November 1, 2006 10:47 AM

    CHASSIS SIZE

    Specifications

    Width
    Height
    Depth

    FM TUNER SECTION
    Tuning Range
    Mono Usable Sensitivity
    Alternate Channel Selectivity
    Signal-to-Noise Ratio
    Stereo Separation
    Capture Ratio

    87.5-108.0 MHz
    0.7 µV
    80 dB
    65 dB
    35 dB
    2.0 dB

    MW TUNER SECTION
    Tuning Range
    Sensitivity (IEC Standard)

    153-281 kHz
    31.6 µV/30 dB

    CD PLAYER SECTION
    Frequency Response
    Wow & Flutter (% WRMS)
    Total Harmonic Distortion
    Dynamic Range
    Signal-to-Noise Ratio
    Channel Separation

    NOSEPIECE SIZE
    Width
    Height
    Depth

    170 mm (6-3/4")
    46 mm (1-13/16")
    18 mm (11/16")

    • Due to continuous product improvement, specifications and design
    are subject to change without notice.

    531-1,602 kHz
    25.1 µV/28 dB

    LW TUNER SECTION
    Tuning Range
    Sensitivity (IEC Standard)

    178 mm (7")
    50 mm (2")
    161 mm (6-3/8")

    5-20,000 Hz (±1 dB)
    Below measurable limits
    0.008% (at 1 kHz)
    95 dB (at 1 kHz)
    105 dB
    85 dB (at 1 kHz)

    CAUTION
    CLASS 1
    LASER PRODUCT
    (Bottom side of player)

    PICKUP
    Wave length
    Laser power

    795 nm
    CLASS I

    GENERAL
    Power Requirement
    Maximum Power Output
    Maximum Pre-Output Voltage
    Bass
    Treble
    Weight

    14.4 V DC
    (11-16 V allowable)
    45 W × 4
    2 V/10 k ohms
    ±14 dB at 60 Hz
    ±14 dB at 10 kHz
    1.6 kg (3 lbs. 8 oz)

    23-EN
    01GB05CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 25

    01GB00CDE-9870R.book Page 24 Wednesday, November 1, 2006 10:47 AM

    Installation and Connections
    Before installing or connecting the unit, please read the
    following and pages 3 and 5 of this manual thoroughly
    for proper use.

    Caution
    HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

    Warning
    MAKE THE CORRECT CONNECTIONS.

    The wiring and installation of this unit requires special technical
    skill and experience. To ensure safety, always contact the dealer
    where you purchased this product to have the work done.

    Failure to make the proper connections may result in fire or product
    damage.

    USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
    SECURELY.

    USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

    Be sure to use only the specified accessory parts. Use of other than
    designated parts may damage this unit internally or may not
    securely install the unit in place. This may cause parts to become
    loose resulting in hazards or product failure.

    (Check with your dealer if you are not sure.) Failure to do so may
    result in fire, etc.

    BEFORE WIRING, DISCONNECT THE CABLE FROM THE
    NEGATIVE BATTERY TERMINAL.
    Failure to do so may result in electric shock or injury due to
    electrical shorts.

    DO NOT SPLICE INTO ELECTRICAL CABLES.
    Never cut away cable insulation to supply power to other
    equipment. Doing so will exceed the current carrying capacity of
    the wire and result in fire or electric shock.

    DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
    HOLES.
    When drilling holes in the chassis for installation, take precautions
    so as not to contact, damage or obstruct pipes, fuel lines, tanks or
    electrical wiring. Failure to take such precautions may result in fire.

    DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
    SYSTEMS TO MAKE GROUND CONNECTIONS.
    Bolts or nuts used for the brake or steering systems (or any other
    safety-related system), or tanks should NEVER be used for
    installations or ground connections. Using such parts could disable
    control of the vehicle and cause fire etc.

    KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
    REACH OF CHILDREN.
    Swallowing them may result in serious injury. If swallowed,
    consult a physician immediately.

    DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
    VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
    SHIFT LEVER.
    Doing so may obstruct forward vision or hamper movement etc.
    and results in serious accident.

    IMPORTANT
    Please record the serial number of your unit in the space provided
    below and keep it as a permanent record. The serial number or the
    engraved serial number is located on the bottom of the unit.

    ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
    PINCHED BY A SHARP METAL EDGE.
    Route the cables and wiring away from moving parts (like the seat
    rails) or sharp or pointed edges. This will prevent crimping and
    damage to the wiring. If wiring passes through a hole in metal, use
    a rubber grommet to prevent the wire’s insulation from being cut by
    the metal edge of the hole.

    DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
    DUST.
    Avoid installing the unit in locations with high incidence of
    moisture or dust. Moisture or dust that penetrates into this unit may
    result in product failure.

    Precautions
    • Be sure to disconnect the cable from the (–) battery post before
    installing your CDE-9870R. This will reduce any chance of damage
    to the unit in case of a short-circuit.
    • Be sure to connect the colour coded leads according to the diagram.
    Incorrect connections may cause the unit to malfunction or damage
    to the vehicle’s electrical system.
    • When making connections to the vehicle’s electrical system, be
    aware of the factory installed components (e.g. on-board computer).
    Do not tap into these leads to provide power for this unit. When
    connecting the CDE-9870R to the fuse box, make sure the fuse for
    the intended circuit of the CDE-9870R has the appropriate
    amperage. Failure to do so may result in damage to the unit and/or
    the vehicle. When in doubt, consult your Alpine dealer.
    • The CDE-9870R uses female RCA-type jacks for connection to
    other units (e.g. amplifier) having RCA connectors. You may need
    an adaptor to connect other units. If so, please contact your
    authorized Alpine dealer for assistance.
    • Be sure to connect the speaker (–) leads to the speaker (–) terminal.
    Never connect left and right channel speaker cables to each other or
    to the vehicle body.

    SERIAL NUMBER:
    INSTALLATION DATE:
    INSTALLATION TECHNICIAN:
    PLACE OF PURCHASE:

    24-EN
    01GB06CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 26

    01GB00CDE-9870R.book Page 25 Wednesday, November 1, 2006 10:47 AM

    3

    Installation

    Slide the CDE-9870R into the dashboard. When the
    unit is in place, make sure the locking pins are fully
    seated in the down position. This can be done by
    pressing firmly in on the unit while pushing the
    locking pin down with a small screwdriver. This
    ensures that the unit is properly locked and will not
    accidentally come out from the dashboard. Install
    the detachable front panel.

    Detachable
    Front Panel
    Lock Pin
    Caution

    When you install this unit in your car, do not remove the
    detachable front panel.
    If the detachable front panel is removed during installation, you
    might press too hard and warp the metal plate that holds it in
    place.

    Removal
    1. Remove the detachable front panel.

    • The main unit must be mounted within 35 degrees of the horizontal
    plane, back to front.

    Less than 35°

    2. Use a small screwdriver (or similar tool) to push the
    locking pins to the “up” position (see above drawing).
    As each pin is unlocked, gently pull out on the unit to
    make sure it does not re-lock before unlocking the
    second pin.
    3. Pull the unit out, keeping it unlocked as you do so.

    <JAPANESE CAR>

    1

    Rubber Cap
    (Included)
    Hex Bolt
    (Included)

    Bracket

    Mounting Sleeve
    (Included)

    Front Frame

    Dashboard

    Pressure Plates*
    This unit

    * If the installed mounting sleeve is loose in the dashboard, the
    pressure plates may be bent slightly to remedy the problem.

    Remove the mounting sleeve from the main unit
    (see “Removal” on page 25). Slide the mounting
    sleeve into the dashboard and fix it with the metal
    shackles.

    2

    Metal Mounting Strap

    Screws (M5 × 8)
    (Included)
    This unit

    Mounting Bracket

    Screw



    Bolt Stud

    Hex Nut (M5)

    This unit

    When your vehicle has the Bracket, mount the long
    hex bolt onto the rear panel of the CDE-9870R and
    put the Rubber Cap on the hex bolt. If your vehicle
    does not have the Mounting Support, reinforce the
    head unit with the metal mounting strap (not
    supplied). Connect all the leads of the CDE-9870R
    according to details described in the
    CONNECTIONS section.
    • For the screw *, provide a proper screw to the chassis installing
    location.

    25-EN
    01GB06CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 27

    01GB00CDE-9870R.book Page 26 Wednesday, November 1, 2006 10:47 AM

    Connections
    To iPod

    Antenna
    JASO Antenna Plug

    ISO Antenna Plug

    (Pink/Black) AUDIO INTERRUPT IN

    To vehicle phone
    (Blue/White)

    REMOTE TURN-ON

    To amplifier or equalizer

    To power antenna

    (Red) IGNITION
    (Black)

    GND

    Ignition Key

    (Blue) POWER ANT

    BATTERY
    (Yellow)

    Battery

    Speakers
    (Green)

    Rear Left
    (Green/Black)
    (White)

    Front Left
    (White/Black)
    (Grey/Black)

    Front Right
    (Grey)
    (Violet/Black)

    Rear Right
    (Violet)

    Speakers

    Amplifier

    Front or
    Subwoofers

    26-EN
    01GB06CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 28

    01GB00CDE-9870R.book Page 27 Wednesday, November 1, 2006 10:47 AM

    iPod Direct Connector
    Control iPod signals.
    Connect this to an iPod by using the FULL SPEEDTM
    Connection Cable (KCE-422i) (sold separately) or connect
    this to an external device (such as a portable player) by
    using iPod Direct/RCA Interface cable (sold separately).
    * Refer to “Setting the AUX+ Mode” (page 18).

    Battery Lead (Yellow)
    Connect this lead to the positive (+) post of the vehicle’s
    battery.

    ISO Power Supply Connector
    ISO Connector (Speaker Output)
    Left Rear (+) Speaker Output Lead (Green)

    AUX+ ON : When an external device is connected.
    AUX+ OFF : When an iPod is connected.

    Left Rear (–) Speaker Output Lead (Green/Black)

    Antenna Receptacle

    Left Front (–) Speaker Output Lead (White/Black)

    Audio Interrupt In Lead (Pink/Black)

    Right Front (–) Speaker Output Lead (Grey/Black)

    Connect this lead to the Audio Interface output of a cellular
    phone which provides ground shorting when a call is
    received.

    Left Front (+) Speaker Output Lead (White)

    Right Front (+) Speaker Output Lead (Grey)
    Right Rear (–) Speaker Output Lead (Violet/Black)

    Remote Turn-On Lead (Blue/White)

    Right Rear (+) Speaker Output Lead (Violet)

    Connect this lead to the remote turn-on lead of your
    amplifier or signal processor.

    Steering Remote Control Interface Connector

    Switched Power Lead (Ignition) (Red)

    Fuse Holder (10A)

    Connect this lead to an open terminal on the vehicle’s fuse
    box or another unused power source which provides (+)
    12V only when the ignition is turned on or in the accessory
    position.

    To steering remote control interface box.

    Front/Subwoofer* Output RCA Connectors
    * When Subwoofer is set to OFF: Output is from front speakers.
    When Subwoofer is set to ON: Output is from Subwoofer.

    Ground Lead (Black)

    Power Supply Connector

    Connect this lead to a good chassis ground on the vehicle.
    Make sure the connection is made to bare metal and is
    securely fastened using the sheet metal screw provided.

    RCA Extension Cable (sold separately)

    Power Antenna Lead (Blue)
    Connect this lead to the +B terminal of your power antenna,
    if applicable.

    FULL SPEEDTM Connection Cable (KCE-422i) (sold
    separately)
    ISO/JASO Antenna Adaptor (sold separately)
    An ISO/JASO antenna adapter may be required, depending
    on the vehicle.

    • This lead should be used only for controlling the vehicle’s power
    antenna. Do not use this lead to turn on an amplifier or a signal
    processor, etc.

    To prevent external noise from entering the audio system.
    • Locate the unit and route the leads at least 10 cm away from the car harness.
    • Keep the battery power leads as far away from other leads as possible.
    • Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
    • If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
    suppressors, contact them for further information.
    • Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

    27-EN
    01GB06CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 29

    01GB00CDE-9870R.book Page 28 Wednesday, November 1, 2006 10:47 AM

    01GB06CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 30

    01GB00CDE-9870R.book Page 2 Wednesday, November 1, 2006 10:47 AM

    01GB02CDE-9870R.fm

    ALPINE CDE-9870R 68-05946Z90-A (EN)



  • Page 31

    01GB00CDE-9870R.book Page 1 Wednesday, November 1, 2006 10:47 AM

    PS Card Euro - 1



  • Page 32

    01GB00CDE-9870R.book Page 2 Wednesday, November 1, 2006 10:47 AM

    PS Card Euro - 2



  • Page 33

    01GB00CDE-9870R.book Page 3 Wednesday, November 1, 2006 10:47 AM

    PS Card Euro - 3



  • Page 34

    01GB00CDE-9870R.book Page 4 Wednesday, November 1, 2006 10:47 AM

    Appendix
    Product Information Card

    Produkt-Informationskarte

    English
    Filling in this Product Information Card is
    voluntary. If you fill in this card and send
    it to Alpine, your data will be tabulated
    into reference data for future Alpine
    product development. In addition, in the
    future you may receive information about
    new products or Survey Mail requesting
    additional opinions about Alpine products
    or services. If you agree to the above term,
    please sign your name in the indicated
    space and return the card. Any additional
    comments or inquiries may be sent to :
    Person in charge of Customer Service
    department Alpine Electronics (Europe)
    GmbH.
    Frankfurter Ring 117, 80807 München,
    Germany
    Phone: +49-(0)89-32 42 640

    Q1. PRODUCT PURCHASED
    1.
    2.
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    10.
    11.
    12.
    13.
    14.

    Deutsch
    Das Ausfüllen dieser
    Produktinformations-Karte ist freiwillig.
    Sollten Sie diese Karte vervollständigen,
    so werden die Daten für zukünftige
    Produktentwicklungen von Alpine als
    Referenzdaten herangezogen. Ebenso
    können Sie in der Zukunft Informationen
    über neue Alpine Produkte erhalten oder
    uns auch Ihre Meinung über Alpine
    Produkte und Dienstleistungen im
    Rahmen von Kunden-Befragungen
    mitteilen. Stimmen Sie dem Kontakt durch
    Alpine zu, so würden wir Sie bitten, in
    dem dafür vorgesehenen Feld zu
    unterschreiben und die Karte kostenfrei an
    uns zurückzuschicken. Zusätzliche
    Kommentare und Meinungen können Sie
    gerne an den zuständigen Kontakt im
    Kundendienst Alpine Electronics (Europe)
    GmbH senden.
    Frankfurter Ring 117, 80807 München, Germany
    Phone: 089-32 42 640
    Q1. gekauftes Gerät
    1.
    2.
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    10.
    11.
    12.
    13.
    14.

    Cassette Player
    CD Player
    MD Player
    DVD Player
    CD Changer
    Amplifier
    Speaker
    Subwoofer
    Monitor Controller
    Video Monitor
    Navigation
    Processor/Equalizer
    CD/Video CD Changer
    Other

    Q2. MODEL NUMBER:
    Q3. DATE OF PURCHASE:
    Month:

    1. Alpine → (Model No.)
    2. Other → (Brand Name)

    Monat:

    Car Audio Specialist
    Audio/Video Store
    Electronics/Appliance Store
    Car Accessories Shop
    Other

    Q5. Art des Geschäfts, in dem Sie das
    Gerät gekauft haben:

    Q6. Type of vehicle in which this unit is
    installed:
    Make:
    Purchased
    Year:

    Model:
    Model
    Year:

    Marke:
    gekauft im
    Jahr:

    1. Purchase
    2. Lease

    Q8. Purpose of buying this unit?
    1.
    2.


    1.
    2.
    3.

    Baujahr:

    1. Kauf
    2. Leasing

    Q8. Zweck des Kaufs dieses Geräts?
    Previous brand replaced?
    Factory installed
    Alpine
    Other → (Brand Name)

    1.
    2.


    1.
    2.
    3.

    1. First time
    2. Two or More times

    Q10.When you purchased this Alpine unit,
    did you compare it with other brand?

    Zusätzlich
    Austausch
    Marke des ausgetauschten Geräts?
    Serienmäßige Ausstattung
    Alpine
    Anderer Hersteller →
    (Herstellername)

    Q9. War dies das erste Mal, dass Sie ein
    Alpine-Gerät gekauft haben?

    1. Yes → (Brand Name)
    2. No.

    1. Erstes Mal
    2. Zweites Mal oder öfter

    Q10.Haben Sie dieses Alpine-Gerät vor
    dem Kauf mit Geräten anderer
    Hersteller verglichen?

    Q11.GENDER
    1. Male
    2. Female

    1. Ja → (Herstellername)
    2. Nein

    Q12.AGE
    Q13.MARITAL STATUS

    Q11.Geschlecht

    1. Single
    2. Married

    1. Männlich
    2. Weiblich

    Q14.OCCUPATION
    Company Owner/Self-employed/Freelance
    Manager
    Company Employee
    Civil Servant
    Educator
    Student
    Other

    Q12.Alter
    Q13.Familienstand
    1. Ledig
    2. Verheiratet

    Q14.Beruf
    1. Selbständige/Firmeninhaber/freiberuflich
    Tätige
    2. Leitende Angestellte
    3. Sonstige Angestellte
    4. Beamte
    5. Schulbildung
    6. Studium
    7. Sonstige

    Q15.Comments

    Q15.Kommentar:

    PS Card Euro - 4

    Q1. PRODUIT ACHETE
    1.
    2.
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    10.
    11.
    12.
    13.
    14.

    Lecteur de cassette
    Lecteur de CD
    Lecteur MD
    Lecteur DVD
    Changeur de CD
    Amplificateur
    Haut-parleur
    Haut-parleur de graves
    Station Multimedia
    Moniteur Vidéo
    Navigation
    Processeur/Egaliseur
    Changeur de CD/CD Vidéo
    Autre

    Mois:

    1. Alpine → (N° du modèle)
    2. Autre → (Marque)

    Q5. TYPE DE MAGASIN OU VOUS AVEZ
    ACHETE LE PRODUIT:
    1.
    2.
    3.
    4.
    5.

    Spécialiste autoradio
    Magasin audio/vidéo
    Magasin d’électronique/appareils
    Magasin d’accessoires automobiles
    Autre

    Q6. Type de véhicule dans lequel cet
    appareil est installé:
    Marque:
    Année
    d’achat:

    Modèle:
    Année du
    modèle:

    Q7. Comment avez-vous acheté ce
    véhicule?
    1. Achat
    2. Location-bail

    Q8. Pourquoi avez-vous acheté cet
    appareil?
    1.
    2.


    1.
    2.
    3.

    Addition
    Remplacement
    Marque précédente remplacée?
    Installée en usine
    Alpine
    Autre → (Marque)

    Q9. Aviez-vous déjà acheté des produits
    Alpine?
    1. Première fois
    2. Deux fois ou plus

    Q10.Lorsque vous avez acheté ce produit
    Alpine, l’avez-vous comparé à une
    autre marque?
    1. Oui → (Marque)
    2. Non

    Q11.SEXE
    1. Masculin
    2. Féminin

    Q12.AGE
    Q13.SITUATION DE FAMILLE
    1. Célibataire
    2. Marié

    Q14.PROFESSION
    1. Entrepreneur/Travailleur indépendant/Freelance
    2. Directeur
    3. Employé de bureau
    4. Fonctionnaire
    5. Educateur
    6. Etudiant
    7. Autre

    Q15.Commentaires

    Q1. Producto Comprado
    1.
    2.
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    10.
    11.
    12.
    13.
    14.

    Radio/Cassette
    Radio/CD
    Reproductor de MD
    Reproductor de DVD
    Cambiador de CD
    Amplificador
    Altavoz
    Subwoofer
    Monitor de control
    Monitor de video
    Sistema de navegación
    Procesador/Ecualizador
    Cambiador de CD/Video CD
    Otros

    Q2. Número de modelo:
    Q3. Fecha de compra:
    Mes:

    Année:

    Q4. Si c’est un système de navigation, quel
    moniteur?

    Modell:

    Q7. Wie haben Sie das Fahrzeug gekauft?

    Addition
    Replacement

    Q9. Have you purchased Alpine products
    before?

    1.
    2.
    3.
    4.
    5.
    6.
    7.

    Spezialist für Auto-Audioanlagen
    Audio/Video-Geschäft
    Elektro-Geschäft
    Autozubehör-Geschäft
    Anderer Hersteller

    Q6. Art des Fahrzeugs, in das das Gerät
    installiert wurde:

    Q7. How was this vehicle purchased?

    Español
    El envío de la información solicitada es
    voluntario. Si Vd. nos la remite, será
    utilizada de modo confidencial para el
    desarrollo de futuros productos Alpine. Si
    Vd. desea recibir información sobre
    nuevos productos de nuestra gama,
    indique su nombre en el espacio designado
    y remítanos la tarjeta. Cualquier solicitud
    adicional puede ser enviada a : Persona
    responsable del Servicio de Atención al
    Cliente de Alpine Electronics (Europe)
    GmbH.
    Frankfurter Ring 117, 80807 München,
    Germany
    Phone: +49-(0)89-32 42 640

    Q2. NUMERO DU MODELE:
    Q3. DATE D’ACHAT:

    1. Alpine → (Modellnr.)
    2. Anderer Hersteller →
    (Herstellername)

    1.
    2.
    3.
    4.
    5.

    Français
    En remplissant volontairement cette fiche,
    et en l’envoyant à Alpine, vous acceptez
    que ces informations soient utilisées par
    Alpine, dans le cadre de développement de
    nouveaux produits. Par ailleurs, vous
    autorisez Alpine à solliciter votre opinion
    par mailing sur de nouveaux produits ou
    services. Si vous acceptez les termes cidessus, veuillez signer cette carte à
    l’endroit indiqué, et nous la retourner.
    Tout autre commentaire ou demande doit
    être adressé à l’attention de: Responsable
    du service consommateur Alpine
    Electronics (Europe) GmbH.
    Frankfurter Ring 117, 80807 München,
    Germany
    Phone: +49-(0)89-32 42 640

    Jahr:

    Q4. Falls Navigationssystem:
    Welcher Monitor?

    Q5. STORE TYPE WHERE PURCHASED:
    1.
    2.
    3.
    4.
    5.

    Kassetten-Spieler
    CD-Spieler
    MD-Spieler
    DVD-Spieler
    CD-Wechsler
    Verstärker
    Lautsprecher
    Subwoofer
    Monitor-Controller
    Video-Monitor
    Navigationssystem
    Prozessor/Equalizer
    CD/Video-CD-Wechsler
    andere

    Q2. Modellnummer:
    Q3. Kaufdatum:

    Year:

    Q4. If navigation system, which monitor?

    Carte d’informations sur le Tarjeta de información del
    produit
    producto

    Año:

    Q4. En caso de sistema de navegación,
    ¿qué monitor?
    1. Alpine → (N° de modelo)
    2. Otros → (Nombre de marca)

    Q5. TIPO DE TIENDA DONDE COMPRÓ:
    1.
    2.
    3.
    4.
    5.

    Especialista en audio de automóviles
    Tienda de audio/video
    Tienda de electrónica/electrodomésticos
    Tienda de accesorios automovilísticos
    Otros

    Q6. Tipo de vehiculo en que la unidad está
    instalada:
    Marca:
    Año de
    compra:

    Modelo:
    Año del
    modelo:

    Q7. ¿Cómo fue comprado este vehiculo?
    1. compra
    2. Leasing

    Q8. ¿Propósito de comprar esta unidad?
    1.
    2.


    1.
    2.
    3.

    Mejora del sistema
    Sustitución
    ¿Sustitución de marca anterior?
    Instalado en la fábrica
    Alpine
    Otros → (Nombre de marca)

    Q9. ¿Ha comprado Vd. productos Alpine
    anteriormente?
    1. Primera vez
    2. Dos o más veces

    Q10.Cuando usted compró esta unidad
    Alpine, ¿la comparó con otros
    fabricantes?
    1. Si → (Nombre de marca)
    2. No

    Q11.SEXO
    1. Masculino
    2. Femenino

    Q12.Edad
    Q13.Estado civil
    1. Soltero
    2. Casado

    Q14.Ocupación
    1. Propietario de empresa/Autónomo/
    Profesional independiente
    2. Gerente
    3. Empleado de compañia
    4. Empleado público
    5. Profesor
    6. Estudiante
    7. Otros

    Q15.Comentarios



  • Page 35

    01GB00CDE-9870R.book Page 5 Wednesday, November 1, 2006 10:47 AM

    Scheda informazioni
    prodotto

    Italiano
    La compilazione di questa formulario è
    volontaria. Se compilate questo
    formulario, ritornandolo ad Alpine, i
    Vostri dati saranno raccolti in un file di
    riferimento per lo sviluppo dei nuovi
    prodotti Alpine. In aggiunta Voi potrete
    ricevere in futuro informazioni riguardanti
    i nuovi prodotti o la richiesta di una Vostra
    opinione circa i prodotti o i servizi forniti
    da Alpine. Se siete d’accordo, Vi
    preghiamo di ritornarci il formulario
    completato negli appositi spazi con i
    Vostri dati. In caso desideriate fornire altri
    commenti o richiedere informazioni
    aggiuntive, potete indirizzare il tutto a :
    Responsabile dipartimento Servizio
    Clienti Alpine Electronics (Europe)
    GmbH.
    Frankfurter Ring 117, 80807 München,
    Germany
    Phone: +49-(0)89-32 42 640
    Q1. PRODOTTO ACQUISTATO
    1.
    2.
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    10.
    11.
    12.
    13.
    14.

    Lettore di cassette
    Lettore CD
    Lettore MD
    Lettore DVD
    CD Changer
    Amplificatore
    Altoparlante
    Subwoofer
    Radio Monitor
    Monitor video
    Sistema di navigazione
    Processore/equalizzatore
    Cambia CD/Video CD
    Altro

    Q2. NUMERO MODELLO:
    Q3. DATA DI ACQUISTO:
    Mese:

    Anno:

    Q4. In caso di acquisto di un sistema di
    navigazione, quale monitor possiede?
    1. Alpine → (No. Modello)
    2. Altro → Nome marca

    Q5. NEGOZIO DI ACQUISTO:
    1.
    2.
    3.
    4.
    5.

    Specialista Car Stereo
    Negozio di audio/video
    Negozio di elettronica/elettrodomestici
    Negozio accessori automobile
    Altro

    Q6. Tipo di veicolo posseduto:
    Marca:
    Anno
    acquisto:

    Modello:
    Anno
    modello:

    Q7. Modalità acquisto
    1. Acquisto
    2. Leasing

    Q8. Scopo acquisto
    1.
    2.


    1.
    2.
    3.

    Aggiunta
    Sostituzione
    Marca sostituita
    Installato di fabbrica
    Alpine
    Altro → (Nome marca)

    Q9. Avevate già acquistato prodotti Alpine?
    1. No
    2. Due o tre volte

    Q10.Nell’acquistarlo, avete paragonato
    questo prodotto ad un’altra marca?
    1. Si → (Nome marca)
    2. No

    Q11.SESSO
    1. Maschile
    2. Femminile

    Q12.ETÀ
    Q13.STATO CIVILE
    1. Celibe/nubile
    2. Coniugato/coniugata

    Q14.LAVORO
    1. Proprietario di azienda/artigiano/libero
    professionista
    2. Manager
    3. Impiegato
    4. Impiegato statale
    5. Insegnante
    6. Studente
    7. Altro

    Q15.Commenti

    PS Card Euro - 5



  • Page 36

    01GB00CDE-9870R.book Page 6 Wednesday, November 1, 2006 10:47 AM

    S/NO. LABEL

    PS Card Euro - 6






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alpine CDE-9870R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Alpine CDE-9870R in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 2,02 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Alpine CDE-9870R

Alpine CDE-9870R Bedienungsanleitung - Holländisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info