Bedienungsanleitung Alpine PKG-RSE3HDMI (Seite 2 von 25) (Englisch, Französisch, Spanisch)

661082

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

2-EN

Before installing or connecting the unit, please read the

following thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in ﬁre or

product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may

result in ﬁre, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE

NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to

electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN

SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to

prevent obstructions when driving. Cables or wiring that obstruct

or hang up on places such as the steering wheel, gear lever, brake

pedals, etc., can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other

equipment. Doing so will exceed the current carrying capacity of

the wire and result in ﬁre or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING

HOLES.

When drilling holes in the chassis for installation, take

precautions so as not to contact, damage or obstruct pipes, fuel

lines, tanks or electrical wiring. Failure to take such precautions

may result in ﬁre.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR

STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any

other safety-related system), or tanks should NEVER be used

for installations or ground connections. Using such parts could

disable control of the vehicle and cause ﬁre, etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE

REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed,

consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER

VEHICLE OPERATION, SUCH AS THE STEERING WHEEL

OR SHIFT LEVER.

Doing so may obstruct forward vision or hamper movement, etc.,

and result in a serious accident.

CAUTION

CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM

Caution

HAVE THE WIRING AND INSTALLATION DONE BY

EXPERTS.

The wiring and installation of this unit requires special technical

skill and experience. To ensure safety, always contact the dealer

where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM

SECURELY.

Be sure to use only the speciﬁed accessory parts. Use of other

than designated parts may damage this unit internally or may not

securely install the unit in place. This may cause parts to become

loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR

PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat

rails) or sharp or pointed edges. This will prevent crimping and

damage to the wiring. If wiring passes through a hole in metal,

use a rubber grommet to prevent the wires insulation from being

cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE

OR DUST.

Avoid installing the unit in locations with high incidence of

moisture or dust. Moisture or dust that penetrates into this unit

may result in product failure.

Precautions

• Be sure to disconnect the cable from the (–) battery post before

installing your PKG-RSE3HDMI. This will reduce any chance

of damage to the unit in case of a short-circuit.

• Be sure to connect the color coded leads according to

the diagram. Incorrect connections may cause the unit to

malfunction or damage to the vehicle's electrical system.

• When making connections to the vehicle's electrical system,

be aware of the factory installed components (e.g. on-board

computer). Do not tap into these leads to provide power for

this unit. When connecting the PKG-RSE3HDMI to the fuse

box, make sure the fuse for the intended circuit of the PKG-

RSE3HDMI has the appropriate amperage. Failure to do so

may result in damage to the unit and/or the vehicle. When in

doubt, consult your ALPINE dealer.

• The PKG-RSE3HDMI uses female RCA-type jacks for

connection to other units (e.g. AV head unit) having RCA

connectors. You may need an adaptor to connect other units.

If so, please contact your authorized ALPINE dealer for

assistance.

IMPORTANT

Please record the serial number of your unit in the space

provided below and keep it as a permanent record. The serial

number plate is located on the bottom of the unit.

Installation and Connections

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine PKG-RSE3HDMI Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alpine PKG-RSE3HDMI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info