Bedienungsanleitung Altec Lansing M812 - Octiv wireless (Seite 3 von 12) (Englisch)

495938

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Introduction

Thank you for purchasing the Altec Lansing M812

Wireless Speaker System for iPod. The M812 includes

one or two wireless, high-performance speakers and a

transmitter base that allows you to listen to most iPod

models, FM radio stations and auxiliary audio sources.

Music is wirelessly transmitted from the base to the

speaker. Since the speakers are wireless, you can place

them almost anywhere in your home. Basic playback

functions for the iPod can be controlled with the supplied

remote control.

Want audio throughout your house? Expansion is easy;

you can use up to eight M812 Wireless Speakers in one

system. Optional, add-on speaker units are available

online at www.alteclansing.com. Go to the M812 product

page.

Contents

Set up and basic operation ..............................pages 3-4

Basic controls and functions ............................pages 5-7

Advanced operation ........................................pages 8-9

Speciﬁcations .......................................................page 9

Troubleshooting ...........................................pages 10-11

Information And Support

For additional information and support, visit

www.alteclansing.com or contact Customer Support.

(See inside front cover for contact information.)

In the Box

Your M812 system includes:

• Wirelessspeaker(s)

• Transmitterbase

• iPodadapters

• Remotecontrol(2AAAbatteriesincluded)

• Powersupplyfortransmitterbase

• FMAntenna

• ACpowercord(forwirelessspeaker)

• 3.5mmstereoaudiocable

• Userguideandquick-connectioninstructions

Set up and basic operation

Set Up

The wireless capabilities of the M812 make it easy and

ﬂexible to set up. The transmitter base can be located up

to 100 feet from the speaker, so you can place speakers

for best sound and the base for convenient access.

See the M812 Quick Start Guide for step-by-step

instructions for quick set up of your M812 system. In

this booklet, you’ll ﬁnd more detail on connections and

operation. After making connections, turn on the speaker(s)

ﬁrst and then turn on the power to the transmitter base.

This allows the base and speaker(s) to synchronize more

easily. If synchronization does not take place, see Wireless

Connectivity for more information (page 4).

Transmitter Base

The transmitter base serves as an iPod dock and FM

tuner. It has rear connectors for auxiliary audio sources

and the power adapter.

iPod Dock

The M812 works with iPods that have a dock connector

(Generation 3 iPods and newer.) To use an iPod with

the M812, install the appropriate adapter plate into

the universal dock. Adapters for several different iPod

models come with the M812. Other adapter sizes may be

supplied with your iPod or be available from Apple.

Auxiliary Audio Devices

The M812 supports auxiliary audio sources such as

portable CD players.

Connect one end of the supplied 3.5 mm stereo cable

into the auxiliary input jack (AUX) located on the back

of the M812 transmitter base, and the other end to the

headphone or line-out jack on your auxiliary audio device.

RCA connectors. To connect a device that uses RCA-

type output jacks, you must use an adapter to convert

the RCA output to a 3.5 mm input. These adapters are

available at most electronics-supply stores.

FM Antenna

Attach the supplied FM antenna for FM reception.

Power Supply

The transmitter base is powered by the power supply

that comes with the M812. Connect the power supply

to the transmitter base, then plug the power supply into

a wall outlet.

Wireless Speaker

The supplied power cord attaches to the back of the

wireless speaker.

Speaker Settings

Two switches are located on the back of the speaker. The

location switch allows you to set the speaker for table-top

or wall-mounted use. The factory default setting is for

table-top use.

The mode switch allows you to set the speaker for stereo

sound or as the left or right speaker in a pair of speakers.

The factory default setting is stereo.

Wall Mounting A Speaker

The wireless speaker can be placed on an appropriate

level surface or mounted on a wall using the optional wall-

mounting bracket.

The speaker should only be mounted on the wall using

a wall-mounting bracket provided by Altec Lansing.

You can order the wall-mounting bracket online at

www.alteclansing.com. Go to the M812 product page.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Altec Lansing M812 - Octiv wireless Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info