541729
7
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
-. For Active Subwoofer & Satellite Speakers
6
Tripod
Mount
Tripod
Mount
Left
Main Mix
Output
Right
Main Mix
Output
QUICK START
SR Active Subwoofer & Satellite Speakers
Signal Cable
Signal Cable
Power Cord
2). Connect the power cord to mains.
3). Turn on your mixer first, then the active speaker cabinets.
4). Turn up the volume control fo the active speaker cabinets.
8). After using, turn off your active speaker cabinets first, then the mixer.
1). Connect one side of signal cable to output left/right of your audio mixer (with stereo-Jack or XLR) and the other
side to the left/right input (stereo/mono XLR) of the active subwoofer; with the second signal cable connect the
left/right output of the subwoofer (stereo/mono- XLR) to the line input (COMBO) of the active satellite (with stereo -
Jack or XLR).
7). Use PFL function to get the proper input level for the mixer, and adjust the main mix level control to manipulate the
output level.
5). Select one of the sixteen presets in to SR400A, with encoder knob (example: number 15 - DISCO + SW).
6). The Subwoofer SR500SA work with 16 presets, select the best crossover frequency presets between 1 (80Hz
BOOST 0°) in phase or 2 (80Hz BOOST 180°) out of phase, to 9 (160Hz BOOST 0°) in phase or 10 (160Hz BOOST
180°) out of phase, this preset included a +6dB bass boost; the other presets between 11 (100Hz FLAT 0°) in
phase or 12 (100Hz FLAT 180°) out of phase to 15 (140Hz FLAT 0°) in phase or 16 (140Hz FLAT 180°) out of
phase, work with a Natural Bass response, if required from the musical program.
Select one of the sixteen presets in to SR500SA, with encoder knob (example: number 4 - 100Hz BOOST 180°
out of phase, or the number 6 - 120Hz BOOST 180°) out of phase, for coupling to the preset 15 - DISCO + SW
of the satellite. The selection of phase conditions between 0° in phase or 180° out of phase is always necessary
after the setting of SR500SA in the environment
PRESET
10
11
12
13
14
15
16
CONCERT H. + SW
LIVE + SW
FLAT + SW
JAZZ + SW
ROCK + SW
DISCO + SW
KARAOKE + SW
SR400A SATELLITE PRESET
1-2-3-4
3-4-5-6
11-12-13-14
11-12-13-14
3-4-5-6
3-4-5-6
1-2-3-4
SR500SA SUBWOOFER
80Hz/100Hz BOOST 0°/180°
100Hz/120Hz BOOST 0°/180°
100Hz/120Hz FLAT 0°/180°
100Hz/120Hz FLAT 0°/180°
100Hz/120Hz BOOST 0°/180°
100Hz/120Hz BOOST 0°/180°
80Hz/100Hz BOOST 0°/180°
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Alto Professional SR Series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info