Bedienungsanleitung Angelcare AC401de luxe (Seite 15 von 16) (Englisch)

537057

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

PART 6 - IMPORTANT INFORMATION (continued)

Wireless Interference

HOW TO AVOID INTERFERENCE?

Angelcare Baby Monitors are designed to

provide optimal performance when set-up

and used according to the instructions.

However, due to increase in wireless products

and systems found on the market today,

some level of interference might occur.

To reduce or avoid such interference we

recommend the following:

•

Always read the Instructions carefully.

Install and set-up the baby monitor in

accordance to the Instructions provided

with your product

•

Always keep your baby monitor (Parent

and Nursery Unit) away from other

wireless devices

•

Never place a cordless or mobile phone

or other radio frequency emissions device

(microwave, wireless router or sound

system) in close proximity or in direct

contact with your baby monitor (Parent

and Nursery Unit)

•

If you would like to use the belt clip on the

Parent Unit, please ensure your mobile

phone is placed in the pocket opposite the

position of the Parent Unit on your belt

•

Make sure the batteries in the Parent

Unit are fresh and fully charged for best

performance (use only NiMH rechargeable

batteries)

•

If you still experience interference, please

refer to the Instructions or the Customer

Service website for more solutions in

solving interference issues

Please refer to the Instruction Manual for

more information on product installation,

testing, warnings and warranty.

Warnings

•

This product is NOT a medical device

designed to prevent cases of Sudden

Infant Death Syndrome (SIDS or cot

death).

•

This product is NOT a substitute

for direct supervision of your baby. Check

your baby’s activities at regular intervals.

Monitoring of premature babies, or babies

considered to be at risk, should be carried

out only under the supervision of a doctor

or health professional.

•

The SensorPad may detect movement from

many sources from both inside and outside

your baby’s room, e.g. washing machine,

loud music, etc. Make sure that all vibration

sources are eliminated before using the

Angelcare monitor. Please do not touch the

baby’s bed when the monitor is in use.

Please read Part 2, Step 1 (Installation of

SensorPad), Part 2, Step 5 (Testing your

Monitor) and the Troubleshooting section.

•

When monitor is in use, DO NOT use a crib

mobile or other crib accessories that produce

vibrations. This can prevent the movement

alarm from working properly as the monitor

will still be detecting movement.

•

If the monitor has been stored or has been

exposed to hot or cold temperatures, it may

take up to one hour before the temperature

displayed on the Parent Unit is accurate.

•

ALWAYS place the Parent and Nursery Units

on a ﬂat surface in an upright position, away

from baby’s reach.

•

Make sure to plug the adapter into a

convenient accessible socket outlet.

•

IMPORTANT - STRANGULATION HAZARD

Children have STRANGLED in cords. Keep the

Adapter cords and Sensor Pad cord WELL out

of the reach of children.

DO NOT put the Nursery Unit inside a crib

(cot) or play yard (play pen).

Because of the serious strangulation risk to

infants and toddlers, parents and caregivers

should NEVER place the Nursery Unit within 1

meter (3 feet) of a crib. NEVER use extension

cords with AC Adapters. ONLY use the AC

Adaptors provided.

•

DO NOT touch the end of the adapter cord

when it is plugged into the mains.

•

The Angelcare monitor uses public airwaves

to transmit signals. The Parent Unit may

pick up signals or interference from other

baby monitors in your area. Your monitor

may also be picked up by receivers in other

households. To protect your privacy, make

sure both units are in the OFF position when

not in use and change the channels regularly.

•

The Angelcare monitor is perfectly safe. The

SensorPad and its cord are entirely passive.

They carry no electrical current and do not

radiate any form of energy. The Nursery

Unit emits only very low power radio signals

through its antenna. These signals do not

present a safety hazard.

•

Your monitor can be used in any crib

or sleeping area (that has no motion or

vibration) designed to hold a baby safely.

•

ONLY USE ORIGINAL ANGELCARE AC

ADAPTERS, MODEL NO. T07505B001.

Monitoring more than one baby

•

NEVER use the Angelcare Movement &

Sound Monitor if multiple babies are

sleeping together in ONE bed!

•

For monitoring more than one baby

(e.g. twins) you need two Angelcare

AC401 Movement & Sound Monitors

and the babies need to be in SEPARATE

beds.

•

If you are using two Angelcare monitors it

is essential that:

a. Each monitor is set to a different

channel

b. The distance between the two Nursery

Units is at least 1 metre

c. The distance between the Parent Units

is at least 1 metre. If 2 babies are in

one room, we recommend using 1

x Angelcare Movement and Sound

Monitor AC401 and 1 x Angelcare

Movement only Monitor AC300.

Please see website for more

information.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Angelcare AC401de luxe Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Angelcare AC401de luxe

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info