722078
3
Zoom out
Zoom in
Vorherige Seite
1/79
Nächste Seite
EN 03 04 EN
Bluetooth Pairing
FLARE 2
1
<2”
Soundcore Flare 2
2
Soundcore Flare 2
Soundcore Flare 2
3
Soundcore Flare 2
FLARE 2 FLARE 2
Press Enter Bluetooth pairing mode
Flashing blue Bluetooth pairing
Steady blue Bluetooth connected
When powered on, the speaker will automatically connect to the last connected
device if available within the Bluetooth range. If not, press the Bluetooth button
to enter the Bluetooth pairing mode.
To pair with another device, press the Bluetooth button to re-enter the pairing
mode.
PartyCast Mode
Set up one Flare 2 as the primary speaker and connect it with more than 100+ secondary Flare
2 speakers to control audio and all the light effects.
Set up the primary speaker:
1. Connect one Flare 2 speaker to your phone or other devices via Bluetooth. When
successfully connected, the Bluetooth LED will turn blue.
2. Press and hold the Bluetooth button on this Flare 2 for 3 seconds until you hear a sound and
the Bluetooth LED ashes white to indicate this Flare 2 is the primary speaker.
The Bluetooth LED on the primary speaker will keep ashing white.
Connect with secondary speakers:
1. Make sure the secondary speakers aren't connected to any Bluetooth devices.
Press the Bluetooth button to disconnect Flare 2 from a device, the Bluetooth
LED will ash blue.
2. Press the Bluetooth button for 3 seconds until you hear a sound and the Bluetooth LED
ashes white to indicate the secondary speaker is in connection mode.
3. When the secondary speakers are close to the primary speaker, they will connect to the
primary speaker automatically. When successfully connected, the Bluetooth LED on the
primary speaker will continue ashing white, while on the secondary speakers will turn white.
1
FLARE 2
2
FLARE 2
>3”
FLARE 2
FLARE 2
FLARE 2
FLARE 2
When successfully enter the PartyCast mode:
you can power off, adjust the volume, or switch light effects for all speakers by controlling
the primary speaker only;
you can power off or switch light effects for each secondary speaker individually;
you can't adjust the volume for each secondary speaker individually;
to exit the PartyCast mode, press the Bluetooth button either on the primary speaker or
on the primary speaker for 3 seconds until the Bluetooth LED ashes blue.
Button Controls
Play / Pause X1 Press
Next track X2 Press twice
Previous track X3 Press thrice
Bass Boost On / Off X1 Press
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Anker Soundcore Flare 2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info