578760
7
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
A85/P85
7
English
Recording
With the Arcam A85 it is possible to listen to and record from
one source, or to listen to one source while recording another.
Both sets of tape sockets are identical in sensitivity and
suitable for use with almost any type of recorder (cassette,
CDR, MD, VCR, reel-to-reel, etc.). The record signal is sent to
both the
TAPE and VCR output sockets.
RECORD
bk
To record the currently selected source, press RECORD until
the display shows
RECORD SOURCE. After a few seconds
the display reverts to showing the volume level and you are
ready to record.
To listen to one source while recording another, press
RECORD
again until the display shows RECORD followed by the name
of an input (e.g. AUX, CD, TUNER, etc.). Now press the
source selector button on the front panel for the source you
wish to record. Your selection is shown on the display for a few
seconds, after which it reverts to showing the volume level and
you are ready to record.
The
RECORD button can also be used as a second zone
selector, sending a source signal at line level to a second
ampli er operating in another room. If you need help with this,
contact your Arcam dealer or Arcam customer support.
Tape-to-tape copying (dubbing)
You can perform tape dubbing from VCR to TAPE, but not from
TAPE to VCR.
For example, to copy from a cassette recorder connected to
the VCR socket to a cassette recorder connected to the TAPE 1
socket, rst use the
RECORD button as explained above and
select RECORD VCR. This routes the VCR signal to the TAPE
output.
Set the cassette recorder connected to the
TAPE socket into its
record mode and the other to playback mode to start dubbing.
TAPE
5
To play back the recording from a cassette deck attached
to the TAPE 1 input, press TAPE. TAPE 1 is shown on
the display. Selecting this input overrides the other source
selectors.
It is also possible to monitor a recording while it is being made,
provided your cassette deck is a 3-head type. To do this, press
TAPE. Switching this button in/out allows an A/B comparison
between the source signal and the recorded signal.
A85/P85 multi.id 03/29/01, 3:35 PM7
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Arcam DiVA P85 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info