Bedienungsanleitung Argo Lillium 13 (Seite 8 von 11) (Englisch)

665648

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

V 06/17

LED

DISPLAY

Shows the relative humidity setting.

TIMER LED

Shows the timer setting.

TANK FULL LED

When the tank is full, the TANK FULL LED lights on and the dehumidifier stops running. A 10 second beep sounds.

Remove the tank and empty it (as indicated in "HOW TO ELIMINATE CONDENSATION"), then restore it; the

dehumidifier will start running again.

When the tank is not correctly positioned, the unit will sound a beep lasting approximately 10": then the LED will turn on.

Reposition the tank correctly..

DEFROST LED

The dehumidifier is designed to operate at ambient temperatures from + 5°C to + 32°C.

If it is operated at low temperatures, ice may form on the evaporator, degrading its operation.

When this happens the dehumidifier goes into defrost mode and the defrost LED lights on. The compressor stops, but the

fan continues running.

We recommend not using the dehumidifier in room temperatures lower than 5°C.

CHILD LOCK LED

To disable the buttons, press the “+” and “-“ buttons for 3 seconds: the LC symbol will appear on the display and the unit

will sound a beep. To reactivate the control panel, press the “+” and “-“ buttons again for 3 seconds.

FAN SPEED LED

Shows the fan speed: HIGH or LOW.

OPERATION LED

You can select one of the following dehumidification modes: the corresponding LED will turn on.

 DEHUMIDIFY mode: the compressor is workable and the fan speed is adjustable. The initial humidity is 55%, low

speed. Humidity range is 30%-80% adjustable.

 AUTOMATIC mode: the compressor is workable and the fan speed is un-adjustable. The initial humidity is 55% and

can’t be set. Fan speed is automatic. If the humidity is higher than 70%, the compressor is working and the fan

speed is high. If the humidity is between 55% and 70%, the compressor is working and the fan speed is low. If the

humidity is less than 55%, the compressor stops working and the fan speed is low.

 CONTINUOUS mode: the compressor runs continuously and the fan speed is low.

 FAST DRY CLOTHES mode: the compressor runs continuously and the fan speed is high.

 FAN modes: the compressor isn’t working and the fan speed is adjustable.

MODE COMPRESSOR FAN SPEED DEFROST TIMER TANK FULL

ALARM

HUMIDITY

SETTING

Fan NO Adjustable NO YES YES NO

Dehumidify YES Adjustable YES YES YES YES

Automatic YES Adjustable YES YES YES NO

Continuous YES Low YES YES YES NO

Fast Dry

clothes

YES High YES YES YES NO

LED COLOR:

The front LED under the control panel changes colour in according to the humidity level in the room:

- When the room humidity is lower than 50% (<=), the led light is BLUE.

- When the room humidity is between 50% to 70%, the led light is GREEN.

- When the room humidity is higher than 70% (>=), the led light is RED.

AUTO RESTART: the dehumidifier starts up again after a power failure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Argo Lillium 13 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Argo Lillium 13

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info