805021
7
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
16V 11/20
YELLOW - Medium air quality (automatic ventilation 2, medium)
ORANGE - Poor air quality (automatic ventilation 3, high)
RED - Bad air quality (automatic ventilation 4, Turbo)
If the button is pressed, the AUTO mode is deactivated: it is therefore possible to manually adjust the fan speed.
SLEEP BUTTON
Touch this button to activate the Sleep mode, the indicator on the display will flash for 10 seconds, after which all the
LEDs, including the one relating to the Sleep mode, will turn off. The appliance will operate at low ventilation speed. To
deactivate the Sleep function, touch any key on the panel, including the Sleep key.
FAN SPEED BUTTON
Touch this button to adjust the fan speed (low, medium, high, turbo).
UVC AND ION BUTTON
Touch this button once to turn on the UVC lamp (the icon will appear on display), press twice to turn on the
Ionization (the icon will appear on display), press three times to turn off the UVC lamp, and press four times to turn off
the Ionization: the corresponding LEDs disappear from the display.
TIMER BUTTON
Touch this button to adjust the operating timer from 1 to 9 hours: the appliance stops automatically according to the set
time.
AIR QUALITY LED
The device is equipped with an air quality sensor, which shows the level detected in the room through the LED ring on
the display, color can change as follows:
LIGHT BLUE - Good air quality (minimum automatic ventilation)
YELLOW - Medium air quality (medium automatic ventilation)
ORANGE - Poor air quality (high ventilation speed)
RED - Bad air quality (Turbo ventilation)
When the “REPLACE FILTER” LED lights up on the display, it is necessary to replace the composite filter, available at
authorized service center.
To replace the filter, follow the instructions below:
Turn off the appliance and follow the instructions to replace the filter:
1. Remove the front panel from the top
2. Remove the composite filter by pulling the two tabs
3. Insert the new filter, taking care that the two tabs are positioned correctly outwards
4. Attach the pre-filter to the composite filter
5. Replace the front panel
6. Press and hold the Power button for 3-5 seconds to reset the filter
REPLACEMENT OF COMPOSITE FILTER
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Argo PURY PLUS UVC wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Argo PURY PLUS UVC

Argo PURY PLUS UVC Bedienungsanleitung - Deutsch - 9 seiten

Argo PURY PLUS UVC Bedienungsanleitung - Französisch - 10 seiten

Argo PURY PLUS UVC Bedienungsanleitung - Italienisch - 9 seiten

Argo PURY PLUS UVC Bedienungsanleitung - Spanisch - 9 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info