642248
12
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
www.argonaudio.com 12
O c t a v e 5 A
Controlling the volume
The main volume on Argon Octave 5A is adjusted on the
back side as indicated on above drawing (page 11).
It is recommended that you set the volume level on Argon
Octave 5A at a rather high level and use your
mobile/tablet/pc etc app to adjust the play back volume.
Regarding TV sound, most TV remotes can control the
Argon Octave 5A active speaker volume if connected to
variable TV audio out and to mini jack input on Argon
Octave 5A.
If you connect your TV to Argon Octave 5A via an optical
out/input you should be aware that the signal is fixed. This
means that the volume has to be controlled on the Argon
Octave 5A and not on the TV remote.
Unless you have a settop box, smart TV box or similar
connected to your TV, then you can adjust the TV sound
volume on the remote control from your settop box, smart
TV box directly.
Input selection
Argon Octave 5A has 5 different inputs:
Bluetooth, RCA, Mini Jack 3,5 mm, Optical1 and Optical2
Inputs are chosen by pressing the volume knob as indicated
on above drawing (page 11)
The input cycle is like this:
1.Bluetooth 2.RCA 3.Mini Jack 3,5 mm, 4.Optical1
5.Optical2.
Each time the knob is pressed it will change to the next
input.
When one cycle is ended the cycle will start again.
When the knob is pressed the bright Blue display-eye will
give a quick blink. When connected to Bluetooth input, the
display-eye will show both a bright Blue and a light Blue
light.
Argon Octave 5A will always start up on the last used play
back source unless it’s not connected or turned on
anymore.
Manually turn Argon Octave 5A ON or OFF
Press and hold the volume/input knob for 3 sec and it will
either turn On or Off.
Special feature
Power On and Off modes
Argon Octave 4A has both “Auto Power Up” (APU)
and “Auto Power Off” (APO)
“Auto Power Off” (APO)
Argon Octave 4A will automatically turn OFF if there is no
sound signal (from current played input) for 15 minutes.
“Auto Power Up” (APU)
Argon Octave 4A will automatically turn ON when a sound
signal, from any input, is detected.
Notice: Out-of-the-Box, Argon Octave 4A comes with
APU in Off mode (No APU).
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Argon Octave 5A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Argon Octave 5A

Argon Octave 5A Bedienungsanleitung - Deutsch - 15 seiten

Argon Octave 5A Bedienungsanleitung - Holländisch - 15 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info