755636
7
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
www.argonaudio.com
7
SA 1
3. Quick start
1. Connect the Power cord into an electric outlet and into the back of the Amplifier.
2. Connect your speakers to the Amplifier using normal speaker cable.
3. Connect your source player (tablet, laptop, mobile phone, CD player, TV) to an input
on the amplifier, using the input connection that fits your source device best.
4. The SA1 has a pre out, enabling you to connect an active subwoofer or a power
amplifier.
4. Special functions and features
1. Remote control function with Samsung, Sony and Denon remotes
Argon SA1 is born with IR commands from the most common Sony and
Samsung TV. That is, you can use your Sony or Samsung IR remote control
for completely basic commands such as: volume up, volume down and mute.
On the SA1.
If you have a remote control that does not send IR commands (eg, a Smart
remote), some newer TVs also support IR learn so you can force the television
to broadcast IR commands to your product, thus using your TV remote control
to control your SA1. Find it in the list under setup on your TV to use this feature.
Check the manual for your TV if in doubt.
2. Auto sense (APU Auto Power Up)
When in standby mode, SA1 will by default start up automatically once you start
playing music from your source. (notice, there is No Auto sense on
Phono/Turntable input)
Bluetooth will Auto connect to already paired devices.
You can turn the Auto sense OFF if you wish. Press and hold the Power button
on the remote for 5 sec.
The Power indicator will flash fast for 2 sec. and the SA1 ‘s APU is disabled.
When SA1 is powered on again it works normal again with APU function.
If you do not want auto sense on the inputs at any time, you should always
power the amplifier off manually with the remote (and hold the power button for
5 seconds when doing so)
3. Auto standby (APD Auto Power Down)
The SA1 will automatically go into standby after 15 minutes if no music is
playing.
Timeout for Bluetooth connection loss with Bluetooth device is also 15 minutes
4. Un-Pair Bluetooth devices
Press and hold BT button for 5 sec light will flash and unpair
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Argon SA1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Argon SA1

Argon SA1 Bedienungsanleitung - Deutsch - 9 seiten

Argon SA1 Bedienungsanleitung - Holländisch - 9 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info