Bedienungsanleitung Ariston Clas HE R (Seite 4 von 64) (Englisch)

719964

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

4 /

OVERVIEW

CE labelling

The CE mark guarantees that the appliance conforms to the

following directives:

- 2009/142/CEE

relating to gas appliances

- 2004/108/CEE

relating to electromagnetic compatibility

- 92/42/CEE

relating to energy eﬃciency

- 2006/95/CEE

relating to electrical safety

- 2009/125/CE

Energy related Products

- 813/2013

Commission regulation (EU)

Advice for the installer

These appliance are designed for use on open vented central

heating systems. A kit is available to allow the boiler to be used on a

sealed system. These appliances are designed for domestic use only.

It should be connected to a heating system and a distribution

network for domestic hot water, both of which must be compatible

with its performance and power levels.

The use of the appliance for purposes other than those speciﬁed is

strictly forbidden. The manufacturer cannot be held responsible for

any damage caused by improper, incorrect and unreasonable use of

the appliance or by the failure to comply with the instructions given

in this manual.

Installation, maintenance and all other interventions must be carried

out in full conformity with the governing legal regulations and the

instructions provided by the manufacturer. Incorrect installation

can harm persons, animals and possessions; the manufacturing

company shall not be held responsible for any damage caused as a

result. The boiler is delivered in a carton. Once you have removed all

the packaging, make sure the appliance is intact and that no parts

are missing. If this is not the case, please contact your supplier.

Keep all packaging material (clips, plastic bags, polystyrene foam, etc.) out

of reach of children as it may present a potential hazard.

In the event of a fault and/or malfunction, turn the appliance oﬀ,

turn oﬀ the gas cock and do not attempt to repair it yourself. Contact

a qualiﬁed professional instead.

Before any maintenance or repair work is performed on the boiler,

make sure you have disconnected it from the electricity supply

by switching the external bipolar switch to the “OFF” position and

removing the fuse.

All repairs, which should only be performed using original spare

parts, should be carried out by a qualiﬁed professional. Failure

to comply with the above instructions could compromise the

safety of the appliance and invalidate all liability on the part of the

manufacturer.

In the event of any maintenance or other structural work in the

immediate vicinity of the ﬂue or ﬂue gas exhaust devices and their

accessories, switch the appliance oﬀ by switching the external

bipolar switch to the “OFF” position and shutting oﬀ the gas control

valve. When the work has been completed, a qualiﬁed technician

must check the eﬃciency of the ﬂue and the devices.

Turn the boiler oﬀ and turn the external switch “OFF” to clean the

exterior parts of the appliance.

Clean using a cloth dampened with soapy water. Do not use

Symbols used on the data plate

MIN

MAX

60/80°C

Legend :

1. Brand

2. Manufacturer

3. Boiler model - Serial number

4. Commercial reference

5. certiﬁcation number

6. Destination country - gas category

7. Gas setting

8. Installation type

9. Electrical data

10. Maximum domestic hot water pressure

11. Maximum heating pressure

12. Boiler type

13. NOx class / Eﬃciency

14. Input rating nominal heating

15. Power ouput heating

16. DHW speciﬁc ﬂow rate

17. Boiler output eﬃciency

18. Input rating nominal DHW

19. Gases which may be used

20. Minimum ambient temperature for use

21. Max. central heating temperature

22. Max. domestic hot water temperature

ATTENTION!!

THE INSTALLATION AND FIRST

IGNITION OF THE BOILER MUST BE

PERFORMED BY QUALIFIED PERSONNEL

IN COMPLIANCE WITH CURRENT

NATIONAL REGULATIONS REGARDING

INSTALLATION, AND IN CONFORMITY WITH

ANY REQUIREMENTS ESTABLISHED BY

LOCAL AUTHORITIES AND PUBLIC HEALTH

ORGANISATIONS.

AFTER THE BOILER HAS BEEN INSTALLED,

THE INSTALLER MUST ENSURE THAT THE

END USER RECEIVES THE DECLARATION

OF CONFORMITY AND THE OPERATING

MANUAL, AND SHOULD PROVIDE ALL

NECESSARY INFORMATION AS TO HOW THE

BOILER AND THE SAFETY DEVICES SHOULD

BE HANDLED.

aggressive detergents, insecticides or toxic products. If the appliance

is used in full compliance with current legislation, it will operate in a

safe, environmentally-friendly and cost-eﬃcient manner.

If using kits or optional extras, make sure they are authentic.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ariston Clas HE R Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info