Bedienungsanleitung Asics AH01-WJ31 (Seite 29 von 32) (Englisch)

592661

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

TO SET AND USE “3-CHANNEL ALARM”

ALARM MODE

● The alarm can be set to ring at three different times of a day. The time zone can also be selected from those set in the TIME Mode.

■ Alarm Time Setting

ALARM Mode

Alarm Setting Display

Press Button “E”

to select desired

alarm channel.

■ Selection of Alarm Channel

・ With each press of Button “E”, the alarm channel changes over in the following order.

・ The alarm sounds differently from channel to channel.

・ The alarm sound can be checked by pressing Button “D”.

■ Engagement/Disengagement of Alarm

・ With each press of Button”A”, the alarm is engaged and disengaged alternately. The

Alarm mark “ ” is shown when the alarm is engaged.

・ The alarm can be engaged or disengaged channel by channel.

・ The Alarm mark is shown if alarm is engaged in any one of the alarm channels.

■ To Stop Alarm

・ The alarm rings for 20 seconds at the designated time.

・ To stop the alarm, press any of the buttons.

[Alarm engaged]

* When the ALARM Mode appears, “ALARM” is shown in the upper row of the

display for 1 second, and then, the Alarm Display appears.

Button “B”:

Returning to ALARM Mode

Button “C”:

Turning on backlight

Button “C”:

[Press for more than 2 seconds]

Returning display to

TIME Mode

Button “B

”

[Press for more than 2 seconds]

Activation of Alarm Setting

Display

Button “E”:

・

Selection of alarm channel

・Selection of digits to be

adjusted

Button “A”:

・

Engaging/disengaging

alarm

・Increasing digits to be

adjusted

Alarm mark

Alarm channel

Indication for

alarm engagement/

disengagement

Button “D”:

・

Checking alarm sound

・Decreasing digits to be

adjusted

Press for

more than

2 seconds.

Hour

Minute

Time zone

(T1/T2)

[1] Press Button “E” in the ALARM Mode to select the desired alarm channel.

[2] Keep Button “B” pressed for more than 2 seconds to activate the Alarm Setting

Display. The minute digits of the alarm time start ashing.

[3] Press Button “A” or “D” to set the ashing digits.

* If Button “A” or “D” is kept pressed for more than 2 seconds, the digits move quickly.

[4] Press Button “E” to show the next digits to be adjusted (ashing).

[5] Repeat Steps [3] and [4] to set the digits in the order shown in the illustration at

right.

[6] After all the adjustments are completed, press Button “B” to return to the ALARM

Mode. The alarm is automatically engaged, and the Alarm mark “ ” is shown.

* If the watch is left untouched in the Alarm Setting Display with the digits ashing, the display

will automatically return to the ALARM Mode in 2 to 3 minutes.

* Please note that the alarm rings according to the current time of the time

zone you have selected (T1 or T2).

Alarm mark

[Alarm disengaged]

AH01-WJ30WJ31_英語版.ai 1 2013/02/24 21:35:28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Asics AH01-WJ31 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info