Bedienungsanleitung Asko wt 6332 w (Seite 48 von 52) (Englisch, Holländisch)

315289

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

- 48 -

4 / PROGRAMMING YOUR MACHINE

•DETAILS OF THE OPTIONS

•Prewash

Specially designed for heavily soiled washing (mud, blood, etc.).

A specific initial agitation in cold water precedes a phase of heating to

30°C.

This agitation phase in cold water enables the particles soiling the washing

to be removed before the water is heated.

Important :

Detergent must be placed in the

container in the products

box.

•Extra rinse

"Especially for sensitive and allergic skin": adds an extra rinse to the

washing cycle.

•Anti-creasing

This avoids the washing creasing and makes it easier to iron.

•Drip Dry

This function, for very delicate linen,

enables you

to remove spinning and

to pass directly to the draining of the washing machine.

•Full drum stop

This function enables you to remove the washing from your machine

before the spin phase or to delay this phase with you washing remaining

in water to prevent creasing.

NB : When the machine is stopped

with the tub full of water, the display

shows alternately:

Then:

— If you want to drain after spinning, use the selector to choose a

suitable spin speed for your type of washing.

The programme will end automatically.

— If you just want to drain, turn the selector to “Drip Dry” (position

”100”).

•Delayed start

You can delay the start of your programme by 1 to 19 hours so that

you can benefit from cheap rate electricity or to have the cycle finish

at a desired time.

To do this, select the time that must pass before the cycle starts by

pressing successively on button (this is done hour by hour) and then

press ”Start/Pause” .

NB:

- Even if you forget to press the “Start/Pause” button after selecting

this option, your choice will still be accepted after a few seconds.

- The time remaining before the start of the cycle is counted down hour

by hour from 19 hours to 1 hour and then minute by minute from 59

minutes to 1 minute.

- Throughout the whole waiting period, the delayed start symbol is

displayed and the four elements light up in succession.

- At the end of the waiting period, the programme starts and the display

shows the duration of the selected cycle.

•MODIFYING A WASHING PROGRAMME

•During programming:

Anything can be changed before the “Start/Pause” button is

pressed.

•After the cycle has started:

You can change the type of textile (for example, switch from “COTTON”

to “SYNTHETICS” , etc.). In this case, check that the options

you previously selected are still there.

You must confirm your new selection by pressing the “Start/Pause”

button .

The machine may then possibly drain off some of its water.

•Throughout the cycle:

Depending on your model, the following changes are possible without

pressing the “Start/Pause” button .

— You can change the temperature for the same type of textile.

NB: If the temperature achieved by the washing cycle is higher than your

new selection, heating the water stops immediately and the cycle

continues.

— You can alter the spin speed throughout the cycle.

— You can select “Drip Dry” and “Full drum stop” throughout

the washing phase.

— You can activate the “Extra rinse” option until rinsing starts.

— You can deactivate all the options throughout the cycle provided

that their action has not already finished.

•During delayed start

— Any kind of programme modification is accepted during a delayed

start’s waiting period.

— You can alter the length of a delayed start throughout the waiting

period before the cycle effectively starts.

NB :

- During this period, selecting a new time cancels out the previous

selection. The new period selected is accepted based on the last selection

made.

- If you want to cancel the delayed start completely during this period,

first display

“19h”

using button . Then press the button again and

briefly press ”Start/Pause” .

The cycle will start immediately.

- If you want to reduce the length of time of the delayed start, proceed

in the same way but do not press the ”Start/Pause” button .

Your machine is then ready for a new setting.

— You can only activate the “Prewash” and “Anti-creasing” options

duringa delayed start’s waiting period.

•When the cycle is over:

When the screen shows “- 0 -”, you can programme a new cycle

without having to reset the selector to the position.

For this, all you have to do is turn one of the selectors or press one of

the buttons.

The screen shows the duration of the programme selected.

The machine is then ready to be reprogrammed.

•AUTOMATIC SAFETY SYSTEMS

•Lid opening safety system:

As soon as washing commences, the lid on your machine is locked.

When the cycle is finished or when the machine has stopped with the

drum full of water, the lid unlocks.

If you have programmed a "Delayed start" , the lid is not locked

until the waiting period is over and the cycle starts.

If you wish to open the lid during the cycle, press button briefly

and wait 1-2 minutes for the safety system to unlock the lid.

Important :

Depending on when you wish to open the lid during the cycle,

this time delay may be a little longer because a cooling down period

may also have to be included.

In fact, to avoid your being severely burnt, the lid safety system will

not open during the cycle unless the temperature inside the machine

is below a certain threshold.

•Water safety system:

During operation, constant control of the water prevents any overflows.

•Spin safety system:

Your washing machine is fitted with a safety system that restricts the

spin when poor load distribution is detected.

In this case, your washing may be insufficiently spun. Redistribute

your washing in the drum and programme a new spin.

•Anti-foam system:

You machine can detect when too much foam is being produced during

spinning.

At such times, spinning stops and the machine drains.

The cycle then restarts, adapting the spin rates and possibly adding

an extra rinse.

Asko wt 6332 w Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info