532085
63
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
Syn248 Installation and Configuration Guide Back to Contents
System Configuration 62
Updating Devices
New software versions improve system functionality. All Gateways and all Desksets
should be running the same software version number.
You can update all devices with one command, or you can update the Syn248 devices
individually.
We recommend automatic device software upgrades for installations with Internet
access. This allows your system to obtain the latest upgrade from our server. Automatic
upgrades may not work if your network’s firewall prohibits connection to the AT&T
servers, or if you do not have DNS services provided by your ISP. If you need to manually
initiate updates, see “To update all devices to the latest software version:” on page 63.
If Internet access is not available, see “To update a single device to the latest software
version:” on page 64.
Sometimes devices with different versions of software cannot detect each other
in the WebUI. Some versions of Syn248 software codes are incompatible, so that
when you use one device's IP address for logging into the WebUI, only the
devices with compatible code versions appear in the device lists. For this reason,
if you are updating devices individually, wait until all other devices are updated
before updating the software version of the device whose IP address was used
for logging into the WebUI. When an updated device restarts with new software,
it may disappear from the device list.
When you add a new “out of box” device to the system, the device automatically
gets new software from the network and then restarts. Allow this process to
complete before using the device. The process may take anywhere between 30
seconds to a few minutes, depending on server speed.
Although unlikely, some types of software upgrades could interfere with
system settings and directories. Therefore, back up the system settings and
Deskset settings before updating the system software. If you receive automatic
updates, back up each device after each configuration change. See “Back Up
and Restore Settings” on page 58.
The device restarts after a software upgrade. Ensure that there are no calls in
progress or they will be dropped.
If a PC is installed in series with the Deskset, restarting the Deskset causes the
PC to lose its network connection briefly.
63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AT-T SYN 248 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info