Bedienungsanleitung ATAG Blauwe Engel (Seite 4 von 37) (Englisch)

507731

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Installation instructions S-HR series page 4

1 Introduction

These instructions describe the functioning, installation,

use and primary maintenance of ATAG central heating

units for United Kingdom and Ireland. Where necessary

different regulations of each country are separately

described.

These instructions are intended for the use of Corgi

registerd installers or registered Bord Gais installers in

connection with the installation and putting into operation

of ATAG units. It is advisable to read these instructions

thoroughly, well in advance of installation. Separate

instructions for use are supplied with the unit for users of

ATAG central heating units. ATAG is not liable for the

consequences of mistakes or shortcomings which have

found their way into the installation instructions or user’s

manual. Further, ATAG reserves the right to alter its

products without prior notification.

When delivering the unit, give the customer

clear instructions concerning its use; present

the customer with the user’s manual and card.

Each unit is fitted with an identification plate. Consult the

details on this plate to verify whether the unit is

compliant with its intended location, e.g.: gas type,

power source and exhaust classification.

On completion of the installation the installer or

commissioning engineer must fill out and complete the

Benchmark commission section of the boiler log book and

hand to customer or end user for future record keeping.

The Benchmark log book must also be filled out and

completed by the service agent following each service call,

and returned to the customer. A copy of the Benchmark

commissioning certificate must be returned to ATAG

Heating UK Ltd along with the warranty registration card to

2 Regulations

The following regulations apply to installation of ATAG

central heating units:

Legislation and Regulations.

Gas Safety (Installation and Use). All gas appliances must

by law, be installed by a competent person, eg. Members

of CORGI and in accordance with the current Gas Safety

Regulation. Failure to install appliance correctly could lead

to prosecution.

In addition to the above regulations this appliance must be

installed in compliance with the current IEE Regulations, the

Building Standards (Scotland Consolidation) Regulations.

Regulations and bye laws of the Local Water Authority and

the Current Health and Safety Regulation.

Ireland:

- Irish standard 813

- Domestic gas installations

The current, Electricity at Work Regulation must be

complied with and also be in accordance with the

relevant and current editions of the British Standards.

The ATAG Blauwe Engel boiler is a certified appliance

and must not be modified or installed in any way contrary

to this Installation Manual.

Manufactures instructions must not be taken in any way

as overriding statutory obligations.

The ATAG Blauwe Engel is a central heating unit with an

optional integrated hot water function. These units must

be connected according to these instructions and all

installation norms in respect of the part of the unit to be

connected.

Observe the following rules of safety:

- All work on the unit must take place in a dry

environment.

- ATAG units may never be in operation without their

housing, except in connection with maintenance or

adjustments (see Chapter 13 and 14).

- Never allow electrical or electronic components to

come into contact with water.

Carry out the following tasks in connection with

maintenance, etc. to an already-installed unit:

- Shut down all programmes

- Close the gas tap

- Remove the plug from the wall socket

- Close the stop cock of the unit’s intake connection

Take note of the following when maintenance or

adjustments are needed:

- The unit must be able to function during these

activities; for this reason, the unit’s supply voltage,

gas pressure and water pressure must be

maintained. Ensure that these are not a source of

potential danger during these activities.

Following maintenance or other activities;

always check the installation of all parts

through which gas flows (using leak-search

spray).

Following maintenance or other activities,

always replace the housing and secure it with

the screw behind the door at the front of the

casing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ATAG Blauwe Engel Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ATAG Blauwe Engel

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info