613607
9
Zoom out
Zoom in
Vorherige Seite
1/33
Nächste Seite
2) Fixing the comfort temperature :
The comfort temperature is the temperature that you would like while the room is occupied.
a) Set the cursor
to
, the light V2 comes on.
b) Adjust knob to 5, the heating light V1 comes on if the ambient temperature is below the required temperature.
c) Wait for a few hours until the temperature stabilizes.
d) If you are happy with the setting (use a thermometer to check if you wish) mark the position once and for all.
Otherwise, modify the setting and return to item c).
3) Adjusting the Eco temperature :
This involves a reduction in degrees compared to the Comfort temperature. We recommend that you use this mode for periods
of absence of more than 2 hours or overnight.
Warning: This reduction applies to the Comfort temperature so it is important to set the Comfort temperature first, before
setting the Eco reduction.
a) Set cursor
to , indicator light V3 lights up.
b) Set the knob
to –3.5°, the heating indicator light V1 comes on if the ambient temperature is less than the desired Eco
temperature.
c) Wait for a few hours until the temperature stabilizes.
d) If you are happy with the setting (use a thermometer to check if you wish) mark the position once and for all.
Otherwise, modify the setting and return to item c).
NB: The measurement is set to –3.5°C in our laboratories. It is possible that the setting for the reduction is not precisely –3.5°C,
depending on your installation’s particular characteristics. In this case, adapt the setting to obtain the desired reduction.
4) Frost free : HG
This mode keeps the temperature at about 7°C in the room when the house is unoccupied for a long period (usually more than
24 hours).
a) Set the cursor
to
5) The heating light : V1
This light indicates periods during which the resistance is heating.
6) Switching off the device
To set the device to the Off position, move the cursor to
7) Locking the controls
It is possible to lock or limit the range of use of thumb-wheels
to
and lock selector
switch cursor
to prevent the inadvertent manipulation of the device (by children, etc).
a) Detach the device from its wall bracket.
b) On the back of the thermostat box, detach pins P from their supports.
c) Choose position B to lock the thumb-wheels or position L to limit the range of use of
the thumb-wheels.
Choose one of the positions M to lock the person in the desired mode.
8) Programming mode
This device has a thermostat capable of receiving orders through its pilot wire.
It recognizes the following commands:
- CONFORT (comfort) : Temperature set using the thumb-wheel
- CONFORT –1 (comfort –1) : Temperature set using the thumb-wheel
: -1°C
- CONFORT -2 (comfort –2) : Temperature set using the thumb-wheel
: -2°C
- ECO : Temperature set using the thumb-wheel
.
- HORS GEL (frost-free) : Room temperature maintained at approximately 7°C
- ARRET (Off) : Immediate stoppage of the device (used for load-shedding).
To activate the programming mode set cursor
to
In this way, by connecting the pilot wire to a timer, you can program your Comfort and Economy temperature periods. It is possible
to connect several devices to one timer and, in this way, make energy savings.
NB: When there is no command given over the pilot wire, the device heats in the Comfort mode. HG and load-shedding
commands override the Economy and Comfort modes. On changing from the Comfort mode to the Economy mode, the
changeover time is approximately 12 seconds.
N
If
t
T
i
T
d
m
If
a
U
li
A
M
T
c
H
D
a
T
T
W
423749F_M74_B_F18_IN_cor.qxd:1328_M74_B_F18_IN 14/12/07 6:08 Page 8
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Atlantic F18 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info