501009
23
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
- Using T-NET / Private exchanges -
23
6 Using T-NET / Private exchanges
You can use the “R” signal button on your telephone on private exchanges and
when using DEUTSCHE TELEKOM’s T-Net functions.
6.1 “R” Button on private exchanges
If you have connected your telephone to a private exchange, you can use all the
facilities such as call transfer, automatic recall, etc. The “R” signal button gives
you access to these facilities. The FLASH time “100ms” will be required on a
private exchange. For this purpose, set the “FLASH” switch to the “100ms”
setting. You will find more information in Chapter 3.5. You can find out from the
dealer from whom the equipment was purchased whether your telephone will
work on your private exchange without any problems and what further facilities
you will receive from this.
6.2 “R” Button and the DEUTSCHE TELEKOM T-NET
functions
Your telephone supports the most important DEUTSCHE TELEKOM added value
functions (e.g. brokering, call waiting, three-way conference, etc.). The T-NET
works using the "FLASH 300ms" setting. For this purpose, set the “FLASH” switch
to the “300ms” setting. You will find more information in Chapter 3.4. Please
contact DEUTSCHE TELEKOM to gain access to the T-NET functions (some of
which are subject to charge).
6.3 Dialling and storing telephone numbers when using
on private exchanges
Note! The pause function between the code for the outside line (usually 0 or 9)
and the dialling tone described in this chapter is only necessary on older private
exchanges.
With some private exchanges, there is a short pause between the code for the
outside line (usually 0 or 9) and the dialling tone. This pause can be entered when
dialling manually and when dialling from the phone book so that the following
numbers are not dialled too quickly.
Entering the pause when dialling manually
Press the redial button
once between the code for the outside line and the
actual telephone number. After an outside line has been obtained, you telephone
will wait for 3 seconds before dialling the actual telephone number.
Storing the pause with the number
Simply press the redial button
after the code for the outside line and before
the actual telephone number when storing the number. When dialling from the
phone book, a pause of three seconds will then be automatically inserted after the
code for the outside line.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

audioline-tel-18

Suche zurücksetzen

  • wIE WIRD AUDIOline mit strom versorgt mit Batterie ? Eingereicht am 14-6-2020 10:57

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Audioline TEL 18 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info