Bedienungsanleitung Audiosonic SCZT2 (Seite 4 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

618699

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

VQT2R77

Control guide

ENGLISH

TEST terminal

ID switch

As this system uses a frequency band of 2.4 GHz, the radio waves

may be interrupted by an obstacle. Depending on the surrounding

environment (i.e. radio wave interruption from outside, etc.) or the

building structure where this system is used (i.e. wall that easily

reflects radio waves, etc.), sounds may be cut or noise may occur.

Install this system properly paying attention to the following descriptions.

 Equipment certification

As this system received Technical Conditions compliance certiﬁ cation

based on the Radio Law, the wireless station license is not required.

However, if you do the following actions to this system, you may be

punished by law.

• Disassemble or refurbish

 Restrictions for use

• Domestic use only.

• Use this system in the same room.

 Do not place an obstacle between the main unit (SC-ZT2) and

speakers. Do not put things on the main unit.

Radio

waves from this system reach maximum range of 15 m in the

same room. If there is an obstacle between the main unit (SC-ZT2) and

speakers or the main unit (SC-ZT2) is placed at the height of 50 cm or

below from the floor, the

radio

waves reach smaller range.

 Keep this system away from equipment that generates radio

wave interference.

If the following equipment is located near the system, install this

system away from such equipment.

• Bluetooth, OA devices, telephone, etc.: approx. 3 m or more

• Microwave oven, wireless LAN compatible devices: approx. 3 m

or more

This system is designed to automatically avoid radio wave interference

with such household equipment. If radio wave interference occurs, the

Wireless Link display (➜ page 16 of SC-ZT2 Operating Instructions)

may blink, the sounds from speakers may be interrupted or noise may

occur.

These phenomena occur when this system selects a proper

frequency. These are not malfunctions.

 Keep this system away from metal objects that tend to reflect

radio waves.

If there are metal objects or furniture in the room where this system is

installed,

radio

waves tend to be reflected. Depending on the listening-

viewing position, sounds may be interrupted or noise may occur. These

symptoms may be remedied by slightly moving this system’s position.

Note that radio waves tend to be reflected also when this system is

installed in rooms with a lot of activity.



There is no positional distinction for each speaker before setting.

 Make sure to place the speakers on a flat, stable surface so

there is no danger of them falling over.



When carrying speakers, hold the pole and base parts. (➜ below)

 The speakers of this system are not magnetically shielded. Do

not install this system near a CRT-based television.

Note

•

Make sure the base parts are not covered by cloth such as a curtain.

• Before attaching the leg cushion (included) on the base parts to

prevent tilt or rattle on the floor, make sure there are no people in

the surrounding area.

• Set the distance from each speaker to the listening-viewing position.

(➜ page 24 of SC-ZT2 Operating Instructions)

Setup example

Front speaker

(right)

Front speaker

(left)

Connected equipment

Main unit

Surround

speaker

(left)

Surround

speaker (right)

Approx.120°

Supplied accessories/AC mains lead connection/Installation/Control guide

•

Place the surround speakers slightly at the back right and left of the listening-viewing position.

• Aim the front face (with Panasonic logo) of each speaker at the

listening-viewing position for setting.

Installation

Wireless functions

Please check and identify the supplied accessories.

Use numbers indicated in parentheses when asking for replacement parts.

(Product numbers correct as of February 2010. These may be subject to change.)

Supplied accessories differ depending on the symbols

(E, GN, GS) indicated on the packaging box.

Use correct accessories according to the region for use.

Supplied accessories

AC IN

TEST

Speaker (with built-in amplifier)

TEST terminal: This is used to check the product operation status.

Only used in factory. Do not insert a foreign object.

ID switch: This is used to check the product operation status and not

used regularly.

WIRELESS LINK

Pole (mid-high part)

Base

(woofer

part)

Side view

AC inlet (➜ left)

[WIRELESS LINK] indicator (➜ right

page)

When the unit is connected to the AC mains

supply, this indicator lights red in standby mode

and lights green when the unit is turned on.

Unit on/off button (k I l ^) (➜ right page)

Use this button to turn the unit on and off.

l (off): The unit is in standby mode.

k (on): The unit is on.

The unit is still using a small amount of power in

the standby. Standby uses less power.

Note

2 AC mains leads

For E

(For the United Kingdom and Republic of Ireland)

(K2CZ3YY00005)

(For continental Europe)

(K2CQ2CA00007)

For GN

(For Australia and New Zealand)

(K2CJ2DA00010)

For GS

(For Saudi Arabia, Kuwait,

Malaysia and Hong Kong)

(K2CZ3YY00005)

(220 to 240 V)

(For Saudi Arabia)

(K2CA2CA00031)

(110 to 127 V)

(For Thailand)

(K2CP2CA00001)

(For others)

(K2CQ2CA00007)

Leg cushion (1 sheet: 8 pieces) (RFA3045-2)

Keep the leg cushion out of reach of children to prevent swallowing.

Refer to page 3 for Sales and Support Information (for the United Kingdom and

Republic of lreland).

The supplied AC mains leads are for use with this system only. Do not use them

with other equipment. Also, do not use AC mains lead for other equipment with

this system.

Note

AC IN

To save power when the system is not to be used for a long time,

unplug it from the household mains socket.

Make sure to turn this system off before unplugging the AC mains lead.

For power consumption of speakers in standby, see page 5.

Power supply differ depending on the symbols (E, GN, GS) indicated on the packaging box.

AC mains lead connection

Household mains socket

For E, GN

(AC 220 to 240 V, 50 Hz)

For GS

(AC 110 to 240 V, 50/60 Hz)

AC mains lead

(supplied)

Side view

FOR THE UNITED KINGDOM, REPUBLIC OF IRELAND, SAUDI

ARABIA, KUWAIT, MALAYSIA AND HONG KONG ONLY

READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3

BEFORE CONNECTION.

Audiosonic SCZT2 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Audiosonic SCZT2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info