777171
9
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
9
EN
OPERATION
Connections
Before using this unit, make sure that the AC Adaptor (21) is correct
voltage.
The unit is supplied with AMP output jacks. The AMP (20) jacks are
unbalanced and used to connect to your amplier.
The MIC L (15) and MIC R (16) input accepts a 1/4” connector.
On the rear panel are two stereo PHONO/LINE (17)(18(inputs, and 1
stereo LINE(19) inputs. The PHONO/LINE (4) enables you to set the (17)
input to phono or Line. The PHONO/LINE (6) enables you to set the (18)
input to phono or Line. The USB/LINE (8) enables you to set the input
to USB or Line (19). Headphones can be plugged into the rear panel
mounted HEADPHONE (14) jack.
Operation
POWER ON: Once you have made all the equipment connections to your
mixer, press the POWER (12). The power will turn on and the POWER
LED (22) will glow RED.
CHANNEL 1: SWITCH (4) allows you to select the PHONO 1/LINE 1 (17)
jack to input phono or line level. The CHANNEL SLIDE (5) controls the
input level of this channel.
CHANNEL 2: SWITCH (6) allows you to select the PHONO 1/LINE 1 (18)
jack to input phono or line level. The CHANNEL SLIDE (7) controls the
input level of this channel.
CHANNEL 3: SWITCH (8) allows you to select the USB OR LINE 2 (19)
jack to input phono or line level. The CHANNEL SLIDE (9) controls the
input level of this channel.
CROSSFADER: The CROSSFADER (10) allows you to the Mixing CH1/
CH2 source into another.
TALKOVER (3) The purpose of the talkover section is to allow the
program playing to be muted so that the mic can be heard above the
music. When you press the SWITCH, the talkover will be on and the
volume of all sources except the Mic inputs are lowered by 12 dB. The
Micro (2) allow you to control the level of MIC1/MIC2.
Connect your headphones to the headphones socket and select the
desired channel (channel 1-3 or MIC) for monitoring with the Cue switch
(1). With this knob PHONE (11), you can adjust the headphones volume
DISPLAY: The DISPLAY (13) indicates either the MASTER output left and
right levels.
The USB (23) jack can connect to USB stick.
|<< (24: Use this button to re-start the track or to select the previous
track.
Play/ Pause (25): Each time you press this button, the operation changes
from play to pause or from pause to play.
>>| (26): Use this button to select the next track.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Auna Pro 10032077 DJ-21 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info