Bedienungsanleitung Avant 635 (Seite 3 von 28) (Englisch)

601694

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Introduction, warranty

600 Series

INTRODUCTION

AVA NT Tecno Oy wants to thank you for purchasing this AVA NT loader. It is the result of Avants

long experience in design and manufacturing of compact loaders.

We ask you that you read and understand the contents of this manual completely before operating

the loader. This will improve your operating and maintenance efficiency, help avoid breakdowns

and damage and extend your machines life.

Contact your local AVA NT dealer for advice regarding service, parts and any

problems relating to the operation of your machine.

AVANT 600 SERIES WARRANTY

This warranty specifically applies to the AVA NT 600 series loaders only and not to any attachments used with

this product.

Any repairs or modifications performed without the prior authorisation of AVA NT Tecno Oy will cancel this

warranty.

During the first year of operation or first 750 hours (whichever is the soonest) AVA NT Tecno Oy warrants

to replace any part or repair any defect which may occur, subject to the terms detailed below:

1) The product has received regular maintenance in accordance with schedules given by the manufacturer.

2) Any damage caused by operation in a negligent manner or exceeding the approved specifications detailed

in this manual is excluded.

3) AVA NT Tecno Oy accepts no responsibility for interruption to working or any other consequential losses

resulting from any failure of the product.

4) Only AVA NT Tecno Oy approved replacement or original quality parts shall be used during routine

maintenance.

5) Any damage caused by the use of incorrect fuel, lubricants, cooling liquid or cleaning solvents is excluded.

6) The Avant Warranty excludes any consumable parts (e.g. tyres, batteries, filters, belts etc.) except where

it can be clearly shown that these parts were defective on original supply.

7) Any damage caused resulting from the use of attachments not approved for use with this product is excluded.

8) In the event a fault occurs which is attributable to manufacturing or assembly defect you should arrange

to return your AVA NT to your authorised dealer for repair. Travel and freight cost are excluded.

IDENTIFICATION OF THE LOADER

Write down the following information about your loader, it will help you when ordering parts etc.

1. Model: AVA NT_____________________Purchase date:______________________________

2. Serial number:________________________________________________________________

3. Engine serial number:__________________________________________________________

The serial number and model of the loader are printed on the manufacturers plate (decal no. 5,

see page 6). Location of engine serial number can be found in the operating manual of the engine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Avant 635 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Avant 635

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info