559269
36
Zoom out
Zoom in
Vorherige Seite
1/37
Nächste Seite
6 Konfiguration der FRITZ!Card
36
6SETTING THE I/O ADDRESS ON FRITZ!CARD
A permanent I/O area (I/O address) and an interrupt must be
assigned to FRITZ!Card in the PC in order to enable it to be
managed. The I/O area is both set directly on the card and also
specified in the software. The interrupt is entered only in the
software. The time at which these settings are required depends
on the installation procedure in the operating system in ques-
tion and is described in Chapter 3 How to Install Fritz!Card.
For how to enter the interrupt and the I/O area in the software and
how to change this entry, see Chapter 3 How to Install Fritz!Card.
Before delivery, the hardware and software of FRITZ!Card are
set up in such a way that problem-free operation is to be ex-
pected. FRITZ!Card is set to the I/O area (I/O address) 300 and
the interrupt 5. If these values are already being used by an-
other plug-in card, it is necessary for you to set a new I/O area
and interrupt. Owners of sound cards should note that these
cards often use interrupt 5.
The I/O area (I/O address) on FRITZ!Card is set by positioning
a so-called jumper. Each position of the jumper corresponds to
a certain I/O area (I/O address). The corresponding I/O ad-
dresses are printed on the card alongside the row of jumpers.
To set a new I/O area (I/O address), proceed as follows:
1. Hold FRITZ!Card with the component side upwards and
turn the FRITZ!Card connections to the right.
The following illustration shows the jumper position set
for the I/O area (I/O address) 300 at delivery time.
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AVM FRITZ Card Classic wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von AVM FRITZ Card Classic

AVM FRITZ Card Classic Bedienungsanleitung und Installationsanweisung - Deutsch - 39 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info