Bedienungsanleitung Axxion TT-32 (Seite 8 von 9) (Englisch)

566931

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Removing of USB / memory card

To remove the USB / memory card, turn off the power or switch the function mode to tuner first. For USB port – unplug

it by pulling out the USB device directly, for memory card – press the memory card inward & then release, now the

card being partially eject and you can remove it by hand.

Phono

Note:

- Remove the stylus protector.

- Be sure that the tone arm is being detached from the tone arm rest before

operating and re-secured again afterwards.

1. Select to “ Phono ” function from function selector (8)

2. Set the speed selector to the proper position depending on the record to be played.

3. Place the record on the platter (use the spindle adaptor if required).

4. Lift the tone arm from the rest and slowly move it to the record side. The platter will start to

rotate.

5. Place the tone arm to the desired position on the record.

6. Adjust the volume to the desired level.

7. At the end of the record, the platter will automatically stop rotating. Lift the tone arm from the

record and return it to the rest.

8. To stop manually, lift the tone arm from the record and return it to the rest.

Remark : as some kind of record the auto-stop area was out of the unit setting, so it will stop before the last rack finish.

In this case, select the auto-stop switch (29) to “ off “ position, then it will run to the end of the record but will not stop

automatically (turn off the unit by power button or switch back the auto-stop switch (29) to “ on “ position to stop the

platter to rotate). Then put back the tone arm to the rest position.

Line out connection

You can connect the system to your hi-fi system by connecting the line out socket (27) to the auxiliary input socket with

a RCA cable (not included).

Remark: Due to ErP stage two requirements and to protect the environment. The

unit will switch to standby mode automatically if there isn’t any music played for

over 15 minutes.

Remote control transmitter

Battery installation (battery not included)

The infra-red transmitter requires 2 AAA size battery for operation.

Button description

1) Find In MP3 mode, press to active file name search function.

2) Info In USB/SD mode, press to active the ID3 feature

3) Rec Press to active/de-active recording function

4) Rep/intro/ran In USB/SD mode, press to active repeat / intro / random function

5) Program In USB/SD mode, press to activate/deactivate program function

6) Play/Pause

In USB/SD mode, press once to start playback. Press again to

enter pause mode.

7) Skip/search forward

Press once to skip to next track, press & hold to search forward

Skip/search backward

Press once to skip to previous track. press & hold to search

backward

8) Stop

In USB/SD mode, press to stop playback.

9) +10/-10 In MP3 mode, press to skip 10 track forward or backward

10) Source In USB/SD mode, press to select USB or SD function repeatedly

11) Track separation Press to divide the recording track at turntable during encoding

EN-4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Axxion TT-32 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Axxion TT-32

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info