501256
51
Zoom out
Zoom in
Vorherige Seite
1/51
Nächste Seite
51
Two televisions in the same room
If you have placed your television
in a room where you already
have a Bang & Olufsen television,
and commands from your
remote control can be received
by both televisions, you must
change the Option setting of the
television. This prevents
simultaneous activation of both
televisions.
When you set up an Option for the
television, disconnect the television
you do not want to set up from the
mains. This ensures that only the
television, you want to set up,
receives the Option programming.
One remote control for both televisions
For your television to function properly,
it is essential that the television is set to
the correct Option. If you have a Beo4,
you must set your television to Option 4,
and if you have a Beo6, you must set the
television to the correct zone.*
1
Option setting with Beo4…
While holding the • button on
Beo4, press
Let go of both buttons
Press to bring up OPTION? in
the Beo4 display
Press to bring up V.OPT in the
Beo4 display and press 4
Option setting with Beo6…
Place yourself in front of the
television
While holding the • button,
press the centre button to
bring up the Setup menu on
Beo6
Let go of both buttons
Press to bring up the Option
Programming display on Beo6
Press the button that matches
the zone in which the television
is placed
1
*NOTE! For information about choice of
zone, contact your retailer.
Beo4 – Operate your television in
Option 4 …
Normally, you can activate a source, such
as TV, simply by pressing the relevant
source button on your remote control.
However, when you set your television
to Option 4, you must do the following,
if you have a Beo4:
Press to bring up LINK in the
Beo4 display
Press a source button, such as TV
TV
LIST
LINK
TV
Zone ‘B’
TV
Zone ‘A
TV
LIST
LINK
TV
LIST
OPTION?
V.OPT
4
Option Pgm
51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bang-en-olufsen-beoplay-v1

Suche zurücksetzen

  • Wie kann ich die Senderreihenfolge ändern.
    z.B. ZDF hat die Nummer 7 ich möchte aber gerne ZDF auf 2 haben . Eingereicht am 23-10-2020 19:23

    Antworten Frage melden
  • wie kann ich unter Webmedia neue Apps hinzufügen ? Eingereicht am 9-7-2020 13:35

    Antworten Frage melden
  • Ton vorhanden keine Bildanzeige nur schwarzer Bildschirm
    BeoPlay V1.40 Eingereicht am 28-11-2019 17:58

    Antworten Frage melden
  • wiie stelle ich den Sendersuchlauf über Kabel ein? Eingereicht am 7-2-2019 11:02

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bang en Olufsen BeoPlay V1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bang en Olufsen BeoPlay V1

Bang en Olufsen BeoPlay V1 Kurzanleitung - Deutsch - 24 seiten

Bang en Olufsen BeoPlay V1 Bedienungsanleitung - Deutsch - 51 seiten

Bang en Olufsen BeoPlay V1 Bedienungsanleitung - Holländisch - 24 seiten

Bang en Olufsen BeoPlay V1 Bedienungsanleitung - Holländisch - 51 seiten

Bang en Olufsen BeoPlay V1 Bedienungsanleitung - Französisch - 51 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info