Bedienungsanleitung Batavia BT-EXP001 (Seite 5 von 20) (Deutsch, Englisch, Holländisch, Französisch)

757194

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English

• When working with the multi saw and

the extension pole, always wear safety

glasses and gloves. Wear a safety hel-

met when working with the multi saw,

where head injuries are to be expected.

• To avoid damage to your hearing,

always wear hearing protection.

• Alwayswearcut-proofandtight-tting

clothes and safety boots.

3. Before rst use

Remove the accessory from the packaging.

Check the machine for transport damage

and do not use the accessory in case of

damages. Keep the packing materials away

from children, risk of suffocation!

4. Contents of packing

1x Extension pole

1x Instruction manual

5. Intended use

The extension pole is designed for extend-

ing the reach of the multi saw. The equip-

ment is to be used only for its prescribed

purpose.

6. Operation

6.1 Slide the multi saw into the

extension pole.

6.2 Hook the bracket into the saw and fold

the lever down to secure the multi saw

and the extension pole together.

6.3 To remove the multi saw, lift up

the bracket and pull out the saw from

the extension pole.

6.4 Attach both components of the exten-

sion pole together and tighten the

screw cap by turning it counter clock-

wise onto the thread. Only hand- tight

the screw cap.

6.5 Insert the battery into the

extension pole.

6.6 Toswitchonthesaw,rstdepressthe

safety switch (1) and then press the on/

off trigger switch (3) on the handle.

To switch off the multi saw,

release the trigger.

6.7 Please observe the manual of the

multi saw.

7. Accessories

Use only accessories with an allowable

speed matching at least the highest no-load

speed of the tool.

8. Maintenance and Cleaning

WARNING: Always disconnect from the

mains power supply, before carrying out any

maintenance/ cleaning of the charger.

Remove the battery before carrying out any

maintenance/cleaning of the tool.

8.1 Cleaning

• Clean the extension pole with a dry or

lightly moistened cloth only. Keep the

contacts free from dust and dirt.

• Keep safety devices, ventilation open-

ings and the motor housing as free as

possible from dirt and dust. Rub the

electric power tool with a clean cloth or

blow over it with low pressure com-

pressed air.

• We recommend that you clean your

electric power tool immediately after

each use.

• Clean the electric power tool regularly

with a damp cloth and somewhat soft

soap. Do not use any cleaning or sol-

vent materials; these can attack the

device’s plastic components. Make sure

that no water can get inside the electric

power tool.

8.2 Maintenance

There are no inner parts of the tool which

need maintenance.

Store the extension pole and the multi saw

always out of reach of children and persons

in need of supervision.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-EXP001 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info