Bedienungsanleitung Bauknecht BS7677F (Seite 9 von 10) (Englisch)

703839

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Induction hobs may whistle or creak during normal operation.

These noises actually come from the cookware and are linked to the

characteristics of the pan bottoms (for example, when the bottoms are

made from dierent layers of material or are irregular).

These noises may vary according to the type of cookware used and to

the amount of food it contains and are not the symptom of something

wrong.

SOUNDS PRODUCED DURING OPERATION

MAINTENANCE AND CLEANING

TROUBLESHOOTING

• Check that the electricity supply has not been shut o.

• If you are unable to turn the hob o after using it, disconnect it from the

power supply.

• If alphanumeric codes appear on the display when the hob is switched on,

consult the following table for instructions.

Please note: The presence of water, liquid spilled from pots or any

objects resting on any of the hob buttons can accidentally activate or

deactivate the control panel lock function.

WARNING

• Do not use steam cleaning equipment.

• Before cleaning, make sure the cooking zones are switched o and that the residual heat indicator (“H“) is not displayed.

Important:

• Do not use abrasive sponges or scouring pads as they may damage

the glass.

• After each use, clean the hob (when it is cool) to remove any deposits

and stains from food residue.

• A surface that is not kept suitably clean may reduce the sensitivity of

control panel buttons.

• Use a scraper only if residues are stuck to the hob. Follow the scraper

manufacturer's instructions to avoid scratching the glass.

• Sugar or foods with a high sugar content can damage the hob and

must be immediately removed.

• Salt, sugar and sand could scratch the glass surface.

• Use a soft cloth, absorbent kitchen paper or a special hob cleaner

(follow the Manufacturer’s instructions).

• Spills of liquid in the cooking zones can cause the pots to move or vibrate.

• After cleaning the hob, dry thoroughly.

DISPLAY CODE DESCRIPTION POSSIBLE CAUSES SOLUTION

F0E1

Cookware is detected but it is not

compatible with requested operation.

The cookware is not well positioned on

the cooking zone, or it is not compatible

with one or more cooking zones.

Press On/O button twice to remove the

F0E1 code and restore the functionality of the

cooking zone. Then, try to use the cookware

with a dierent cooking zone, or use dierent

cookware.

F0E7

Wrong power cord connection. The power supply connection is not

exactly as indicated in “ELECTRICAL

CONNECTION“

paragraph

Adjust the power supply connection

according to “ELECTRICAL CONNECTION“

paragraph

F0EA

The control panel switches o because

of excessively high temperatures.

The internal temperature of electronic

parts is too high.

Wait for the hob to cool down before using

it again.

F0E2, F0E4, F0E6,

F0E8, F0EC, F1E1,

F6E1, F7E5, F7E6

Disconnect the hob from the power supply.

Wait a few seconds then reconnect the hob to the power supply.

If the problem persists, call the service centre and specify the error code that appears on the display.

d E

[when the hob is off]

The hob does not switch heat up.

The functions do not come on.

DEMO MODE on.

Follow the instructions in the “DEMO MODE“

paragraph.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht BS7677F Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht BS7677F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info