Bedienungsanleitung Bauknecht BSBO 3O35 PF X (Seite 5 von 8) (Englisch)

806620

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

LOADING THE RACKS

CUTLERY RACK

The third rack was designed to house

the cutlery. Arrange the cutlery as

shown in the gure. A separate arran-

gement of the cutlery makes collection

easier after washing and improves

washing and drying

performance.

Knives and other utensils with sharp

edges must be positioned with the

blades facing downwards.

UPPER RACK

Load delicate and light dishes: glasses,

cups, saucers, low salad bowls.

The upper rack has tip-up supports

which can be used in a vertical position

when arranging tea/ dessert saucers or

in a lower position to load bowls and

food containers.

(loading example for the upper rack)

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper basket can be adjusted:

high position to place bulky crockery in the

lower basket and low position to make the most

of the tip-up compartments by creating more

space upwards.

The upper rack is equipped with a Upper Rack

height adjuster (see gure), without pressing

the levers, lift it up by simply holding the rack

sides, as soon as the rack is stable in its upper

position. To restore to the lower position, press

the levers (A) at the sides of the rack and move

the basket downwards.

We strongly recommend that you do not adjust the height of the

rack when it is loaded.

NEVER raise or lower the basket on one side only.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable aps can be fold

or unfold to optimize the arrange-

ment of crockery inside the rack.

Wine glasses can be placed safely

in the foldable aps by inserting

the stem of each glass into the

corresponding slots.

Depending on the model:

- to unfold the aps there is

needed to slide it up and rotate or

release it from the snaps and pull

it down.

- to fold the aps there is needed

to rotate it and slide aps down or pull it up and attach aps to the

snaps.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery

etc.... Large plates and lids should ideally

be placed at the sides to avoid interfe-

rences with the spray arm.

The lower rack has tip-up supports

which can be used in a vertical position

when arranging plates or in a horizontal

position (lower) to load pans and salad

bowls easily.

(loading example for the lower rack)

POWER CLEAN®

Power Clean® uses the special water jets in

the rear of cavity to wash more intensively

the high dirty items. The lower rack has a

Power Clean support, a special pull-out

support in the rear of the rack that can be

used to support frying pans or baking pans

in upright position, thus taking up less space.

Placing the pots/casseroles faced to the Power Clean® component

please activate the POWER CLEAN® on the panel.

How to use Power Clean®:

1. Adjust the Power Clean® area G

folding down the rear plate

holders to load pots.

2. Load pots and casseroles

inclined vertically in Power

Clean® area. Pots have to be

inclined towards the power

water jets.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht BSBO 3O35 PF X Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht BSBO 3O35 PF X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info