Bedienungsanleitung Bauknecht DE 5360 SG (Seite 5 von 5) (Englisch)

806836

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

5019 418 33073

D F NL E

GB PIGR

SAFEGUARDING THE ENVIRONMENT

1. Packing

Packing materials are 100% recyclable and are marked with the

recycling symbol .Comply with the local regulations for their

disposal. Packing materials (plastic bags, polystyrene, etc.) are are a

potential source of danger, therefore keep them out of the reach of

children.

2. Appliance

This appliance is marked in compliance with European Directive

2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).

By ensuring that this appliance is correctly scrapped, the user can

help prevent potentially negative consequences for the environment

and the health of persons.

The symbol on the product or the accompanying documentation

indicates that this product should not be treated as domestic waste

but must be taken to a suitable collection centre for the recycling of

electrical and electronic equipment.

Disposal must be carried out in compliance with local regulations on

waste disposal.

For further information on the treatment, recovery and recycling of

this product, contact the competent local authority, the domestic

waste collection service or the shop where the product was

purchased.

PRECAUTIONS AND GENERAL

RECOMMENDATIONS

CAUTION!

• Children or infirm persons must not operate the

appliance without supervision.

• Make sure children do not play with the appliance.

1. Do not connect the appliance to the power supply until

installation is completed; disconnect the hood from the mains

before performing any cleaning or maintenance.

2. Do not cook food “flambé” under the hood. Naked flames could

cause a fire.

3. Do not leave pans unattended when frying, as the cooking oil

could catch fire.

4. Regular cleaning and maintenance guarantees good hood

operation and performance. Regularly remove all grime

deposits. Regularly clean or replace the filter. Do not use

flammable materials for the ducting of exhausted air.

5. If the hood is used together with other non-electric appliances,

the negative pressure in the room must not exceed 4Pa

(4 x 10 -5 bars). Make sure the room is adequately ventilated.

Electrical connections

Before connecting the hood to the power supply, make sure the

voltage specified on the dataplate matches that in your home. The

dataplate is located inside the hood behind the grease filter.

If the appliance is fitted with a power cable and plug, the plug must

be placed in an accessible position.

If the hood is not provided with a plug, use one that complies with

current standards or use a double-pole switch, complying with

current regulations, with a minimum contact opening gap of 3 mm.

Replacement of the power cable with plug or flexible cable can only

be carried out by the "Assistance Service" or by qualified personnel.

Cleaning the hood

Warning! Failure to remove oil/grease (at least once a month) could

cause a fire.

Use a soft cloth with a neutral detergent. Never use abrasive

substances or alcohol.

Before using the hood

Please read these instructions carefully and keep them for future

reference, in order to ensure best use of your hood.

Packing materials (plastic bags, polystyrene, etc.) are are a potential

source of danger, therefore keep them out of the reach of children.

Make sure the hood has not been damaged during transport.

Installation, electrical connections and replacement of the power

cable with plug or flexible cable must be carried out by a qualified

technician in compliance with the current local regulations.

Declaration of conformity

This product has been designed, manufactured and put on the

market in conformity with the following:

- safety objectives of "Low Voltage" Directive 73/23/EEC

- protection requirements of “EMC” Directive 89/336/EEC

amended by Directive 93/68/EEC.

Troubleshooting guide

The hood does not work:

• Is the plug properly inserted in the power socket?

• Is there a power failure?

• Is the fuse blown?

The hood is not extracting efficiently:

• Is the right speed selected?

• Do the filters need cleaning or replacing?

• Are the air outlets blocked?

The light does not work:

• Does the bulb need replacing?

• Is the bulb correctly fitted?

• Is the fuse blown?

AFTER-SALES SERVICE

Before calling the Assistance Service

1. Check if you can fix the problem yourself (see ”Troubleshooting

guide”).

2. Switch the hood off and then on again to check if the problem

has gone.

3. If the problem persists, call the Assistance Service.

Specify:

• the type of fault,

• the product model given on the dataplate located inside the

hood and visible on removing the grease filters.

• your full address,

• your telephone number and area code.

• the Service code (the number appearing below the word

SERVICE on the dataplate inside the hood behind the grease

filter).

Should any repairs be necessary, contact an authorised Technical

Assistance Centre (to ensure original spare parts are used and that

repairs are carried out correctly).

Failure to comply with these instructions can compromise the safety

and quality of the product.

41833073.fm Page 8 Monday, October 24, 2005 12:18 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht DE 5360 SG Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht DE 5360 SG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info