Bedienungsanleitung Bauknecht TSenseD8X2SK (Seite 3 von 4) (Englisch)

703637

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website - docs.hotpoint.eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product’s identi cation plate.

THANK YOU FOR BUYING A HOTPOINT PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.hotpoint.eu/register

Quick guide

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

xxxx

• to disable the option, keep the button pressed until the machine

signals that the option has been disabled.

This option remains in memory if selected in the previous drying.

Crease Care

This option add a crease treatment at the end of the cycle

by means of a periodic rotation of the drum (duration up to 10

hours). It is particularly suitable when it is not possible to remove

the laundry as soon as the drying ends. If this option is used

together with the Start Delay, the crease treatment is added

also in the Start Delay phase. This option remains in memory if

selected in the previous drying.

Add Favorite

This button allows to add the most used programmes (max. 6 -

by entering the seventh one, one of the already saved programmes

will be cancelled) to “Favourite”, already inclusive of options.

• Select the programme and the options to be saved.

• Keep the button pressed for some seconds.

• ISaving is conrmed with a message on the display.

The same programme cannot be saved twice with dierent options.

Cycle Option

This buttons serves to access a menu of available options (see

next options). The buttons “UP” and “DOWN” serve to scroll the

options and the button X allows to conrm the selection .

Gentle

Enables a more gentle treatment of the laundry by reducing

the drying temperature.

Iron Ready

This option signals when the garments reach a dryness

level suitable for ironing by means of the beeps and the

display. Remove the garments to be ironed, close the door and

press the Start/Pause button. The dryer goes on working until

the remaining garments reach the selected dryness level.

CARE AND MANTENANCE

Unplug the dryer during the cleaning and maintenance

procedures.

Emptying the water tank after each cycle (see Fig. A).

Pull the container out of the dryer and and empty it into a sink

or other suitable drain, then place it back. Do not use the dryer

without having inserted the container back in place.

Cleaning the door lter after each cycle (see Fig. B).

Pull the lter out and clean it by removing the lint from the lter

surface under running water or using a vacuum cleaner. For optimal

performance, dry up all the lters before inserting them back in

place. Do not use the dryer without having reinserted the lter in

place.

Remove the door lter as described below:

1. Open the door and pull upwards.

2. Open the lter and remove lint from all its parts. Replace it

correctly.

Ensure it is completely inserted ush with the dryer seal.

PRODUCT DESCRIPTION

1. Water bottle

2. Air Intake

3. Bottom lter

4. Door lter

Cleaning the bottom lter when the relevant indicator

turns on (see Fig. C).

Pull the lter out and remove the lint from its surface by

washing it under runing water or by using a vacuum cleaner.

However, it is advisable to clean this lter after each cycle to

optimise drying performance. Do not use the dryer without

having inserted the lter in place rst.

Remove the bottom lter as described below:

1. Open the lower door.

2. Take the handle and pull the lower lter out.

3. Open the rear side of the lter and remove the lint from the

inner surface of the mesh.

4. Clean the bottom lter chamber avoiding the direct contact

with the leaves.

5. Close the rear side of the lower lter and place it back by

checking it is perfectly integrated in place.

6. Lower the lter handle and close the bottom door.

7. Make sure the air intake is free.

The lters are essential parts for drying. They are intended

to collect the lint formed during drying process. In case

of clogged lters, the air ow inside the dryer would be

seriously aected: the drying times would be longer, the

energy consumption would increase and the dryer could be

damaged. If these procedures are not carried out properly,

the dryer may not start.

TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Make sure that door and water tank are properly closed.

3. If the drain hose is connected to your sewage system, x the

drain hose on the rear of the dryer again (see Installation Guide).

Power consumption

o-mode (Po) - Watts 0.50

left-on mode (Pl) - Watts 1.00

Programs Kg kWh Minutes

Eco Cotton *

8 1.78 194

Eco Cotton

4 1.15 135

Synthetics 4 0.73 95

*This is the reference programme for the energy label and suitable to

dry normal wet cotton laundry. This is the most ecient programme

in terms of energy consumption for drying wet cotton laundry.

(Standard/Default starting conguration)

Heat Pump System

The heat pump contains uorinated greenhouse gases,

contained in a hermetically sealed unit. This sealed unit contains

0.18 kg of the F gas R134a. GWP = 1430 (1 t CO2).

Bauknecht TSenseD8X2SK Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info