305957
15
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
33
WATER HOSE MESH FILTERS
Check and clean periodically.
For machines with a straight water supply
hose (see figure)
1.
Turn off the tap.
2.
Unscrew the hose from the tap.
3.
Clean the internal strainer.
4.
Screw the supply hose back onto the tap.
5.
Unscrew the hose from the machine.
6.
Remove the filter from the washing machine
with pliers and clean it.
7.
Replace the filter and screw the hose
connection back on to the machine.
8.
Turn on the tap and
ensure that the
connection is completely water-tight.
For machines with Water Stop hose
(see figure)
1.
Turn off the tap.
2.
Unscrew the hose from the tap.
3.
Clean the strainer.
4.
Screw the Water Stop hose back onto the
tap.
5.
Turn on the tap and
ensure that the
connection is completely water-tight.
FILTER
Check and clean the filter two or three times a
year (see “Removing the Filter”).
The appliance will not switch on or stops in
the middle of the programme
Power plug properly inserted in mains
socket?
Mains fuse OK?
Power failure?
Tap turned on? Is water coming through?
Door closed?
Programme selected?
“On/Off” button pressed?
No water or insufficient water supply
Tap turned on completely?
Kink in water hose?
Water hose filter clogged? (See “Care and
Maintenance”).
Water hose frozen up?
The appliance has a safety hose and the
safety valve has opened (red indicator in the
safety valve inspection window)?
In this case replace it with a new safety hose.
Waste water not pumped out
Drain hose installed correctly? (See
“Installation Instructions”).
Filter clogged? (See “Removing the Filter”).
Drain hose frozen up?
Is the rinse hold button pressed?
Detergent and additive product residues in
detergent drawer at end of wash
Siphon installed correctly?
Siphon clogged?
Not enough water delivered? (See above).
Also see “Detergent and Additives” and
“Care and Maintenance”.
Machine vibrates during spin cycle
Machine perfectly horizontal with all four feet
on ground? (See “Installation Instructions”).
Transit bolts removed? The transit bolts must
be removed before the machine is used (see
“Installation Instructions”).
CARE AND MAINTENANCE
Straight hose Water Stop hose
TROUBLESHOOTING GUIDE
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bauknecht wa 4551 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bauknecht wa 4551

Bauknecht wa 4551 Bedienungsanleitung - Deutsch - 16 seiten

Bauknecht wa 4551 Bedienungsanleitung - Holländisch - 12 seiten

Bauknecht wa 4551 Bedienungsanleitung - Französisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info