Bedienungsanleitung Bauknecht WA 75760 (Seite 2 von 2) (Englisch)

449644

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

5019 401 05226

Add the detergent as described in the chapter

“Detergent and Additives” in the booklet.

1. Turn the programme selector knob in any

direction to the desired programme.

The remaining time display shows the duration

of the chosen programme (in hours and

minutes) and the pilot lamp above the “Start/

Pause” button is flashing.

2. The programme sequence indicator and the

indicator with the maximum possible spin speed

light up.

3. The temperature can be altered by pressing the

“+” or “-” button under the corresponding LED

display.

“Prewash” button

• Only for heavily soiled laundry (for example sand

or granular dirt). Programme duration is

increased by some 15 min.

“Intensive Rinse” button

• An additional rinse cycle is carried out.

• This additional option is particularly suitable for

areas with very soft water, for washing baby

linen and helping people with detergent allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water

without being spun: discoloration of the laundry

and additional creasing are prevented.

• This additional option is particularly

recommended for the programme “Synthetics”

or “Delicate”.

• This additional function is particularly useful if

you want to postpone spinning to a later time.

Note: The programme has reached the “Rinse

Hold” when the “Rinse Hold” button light flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the

appropriate spin cycle for the current

programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to “Drain/Cancel”

and press the “Start/Pause” button again.

“Speed Reduction” button

• A maximum spin speed is assigned to each

programme.

• Press the button to set another speed for the

spin cycle.

• If the spin speed “0” is selected, the final spin is

cancelled. The water is only drained out.

CONSUMPTION DATA*

Programme Temperature

(°C)

Wash

(kg)

Water

(l)

Energy

(kWh)

Programme duration **

approx.

(hours : minutes)

Cotton 95 6.0 49*** 1.90 1:55

Cotton 60 6.0 44 1.14 2:20

Cotton 40 5.0 42 0.70 2:00

Synthetics 60 2.5 55 0.70 1:30

Synthetics 40 2.5 50 0.50 1:15

Daily Mixed 40 3.0 48 0.55 1:00

Delicate 30 1.5 60 0.50 0:45

Wool 40 1.0 60 0.50 0:40

Rapid wash 30 3.0 37 0.40 0:30

Handwash 30 1.0 45 0.40 0:35

Consumption values

were measured in normalized conditions in compliance with Standard IEC/EN 60456.

** The

programme duration

may also vary from the chart values. The washing machine is able to allow for particular household

conditions and to adapt the programme run time accordingly.

*** To reduce

the water temperature

, some cold water is

added at the end of the main wash cycle, before the pump drains the

water out.

POUR IN DETERGENT, CLOSE THE

DOOR AND SELECT A PROGRAMME

SELECT SPECIAL OPTIONS -

The indicator lights go on.

“Easy Ironing” button

• To lessen creasing, the water quantity is

increased and the clothes are spun very gently at

reduced power. This makes your laundry

significantly damper at the end of the

programme.

The “Start Delay” allows to run the machine at the

consumer's convenience, for example at night when

electricity is cheaper.

• Press the “Start Delay” button. Select the

programme start from 1 to 19 hours ahead by

pressing the button again.

• Press the “Start/Pause” button. The Start

Delay indicator light flashes until the programme

starts.

• During programme start the remaining time

appears in the digital display.

“Start Delay” correction.

• Before the “Start Delay” has been started:

The preset number of hours can be altered by

continuously pressing the “Start Delay” button.

The number of hours can be reduced by first

turning the programme selector switch to the

“Off” position. Then set the programme again

and select the desired number of hours.

• After the “Start Delay” has been started:

The preset number of hours can be reduced by

pressing the “Start Delay” button again. To

increase the number of hours preselected, first

turn the programme selector switch to the “Off”

position. Then set the programme and the

additional options again and select the desired

number of hours.

After you have selected the programme and the

additional option, the indicator light over the

“Start/Pause” button flashes. Turn on the tap and

start the programme by pressing the

“Start/Pause” button. Now the indicator light

above the button goes on.

In addition, all programme phases are indicated by

the associated lights. After the end of a programme

phase the associated indicator light goes out. Thus

the programme sequence indicator moves from left

to right across the wash, rinse and spin phases. At

the end of the programme only the “End” indicator

is still on.

In the first 15 minutes after the start of the “Cotton

coloured” and “Synthetic” programmes the door

can be opened to add further laundry. This is not

possible if “Rapid Wash” is selected.

• The remaining time display shows “0:00” and the

“End” indicator lights up.

1. Turn the programme selector knob to the “Off”

position.

2. Turn off the tap.

3. Open the door and unload the machine.

A newly-selected programme will continue in the

same programme section during which the current

programme was interrupted. Therefore do not add

any more detergent.

1. Press the “Start/Pause” button to interrupt the

programme. The indicator light flashes.

2. Select the new programme (with temperature),

any additional options and - if you wish - another

spin speed.

3. Press the “Start/Pause” button again to restart

the programme.

• If you are in the “Prewash” programme step this

additional option can not be deselected as

described (to do this see “Cancel/Delete

Programme).

1. Press the “Start/Pause” button to interrupt the

programme. The indicator light flashes.

2. Set the programme selector to “Drain/Cancel”.

The spin speed “0” and the remaining time “2

minutes” are displayed.

3. Press the “Start/Pause” button to start the

“Drain/Cancel” programme.

START DELAY

PROGRAMME START

DOOR LOCKED

PROGRAMME END

RESELECT AFTER PROGRAMME START

CANCEL/DELETE PROGRAMME

40105226GB.fm Page 2 Friday, December 3, 2004 10:01 AM

Black process 45.0° 100.0 LPI

Bauknecht WA 75760 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht WA 75760

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info