584991
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
5019 400 00078
CONSUMPTION DATA
Bauknecht is a registered trademark.
Programme
Tempe-
rature
(°C)
Load
(kg)
Water
(l)
Energy
without “Rapid”
(kWh)
Approx. Programme Duration (hrs : min)
without “Rapid” with “Rapid”
Mixed 40 3.0 45 0.43 1:00
Cotton 95 6.0 55* 1.85 2:05 1:55
Cotton 60 6.0 48 1.02 2:30 1:45
Cotton 40 6.0 48 0.60 2:30 1:30
Synthetics 60 3.0 54* 0.85 1:55 1:14
Synthetics 40 3.0 50 0.50 1:40 0:59
Delicates 40 1.5 50 0.55 0:45
Wool/Handwash 40 1.0 40 0.55 0:35
Jeans 40 4.0 41 0.58 1:30 1:10
White 40 6.0 48 0.65 2:45
Light colours 40 4.0 67 0.50 1:20 1:00
Dark 40 4.0 41 0.58 1:40 1:10
Super Silent 60 6.0 48 0.78 4:00
Aqua Eco 40 2.5 19 0.43 1:00
Speed 15´ 30 3.0 30 0.15 0:15
eCotton ** 60 6.0 48 0.67 3:30
eCotton ** 60 3.0 34 0.56 2:30
eCotton 40 6.0 48 0.61 3:15
eCotton ** 40 3.0 34 0.47 2:30
Power consumption in off-mode 0.11 W / in left-on mode 0.11 W
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with
respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer
to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Standard Cotton programme and basis for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.
“Spin” button (incl. “Rinse hold”)
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If you select spin speed “0”, the final spinning is cancelled and
the water is drained out only. However, intermediate spin
phases remain during the rinse.
• If you select “Rinse hold”, the laundry remains in the last rinse
water without progressing to the final spin cycle, to avoid
creasing and prevent colours from changing. To activate the
“Rinse hold”, press the “Spin” button repeatedly until the
“Rinse hold” symbol on the display lights up.
- The wash programme stops to “Rinse hold” when the “Rinse
hold” symbol on the display blinks; the light of “Start” button
also blinks.
- To terminate the “Rinse hold” by spinning the laundry, press
“Start” - the laundry will be spun with the default spin speed.
You can also select another spin speed with the “Spin” button
before you start the spin cycle by pressing “Start”.
- To terminate the “Rinse hold” by draining the water without
spinning, press the “Spin” button until spin speed “0” appears
on the display; then press “Start” to start the draining. Do
not leave the laundry to soak for too long in the “Rinse hodl”
(especially silk).
“Colours 15° ” button
• Saves energy used for water heating while maintaining a good
wash result.
• Supports colour maintenance when washing coloured laundry.
• Recommendable for lightly soiled laundry without stains.
• Make sure that your detergent is suitable for cold wash
temperatures.
• Not selectable for Cotton 70 - 95°C.
“Rapid” button
• Enables quicker washing by shortening the programme duration.
• Recommendable for small loads or only lightly soiled laundry.
SAVE YOUR FAVOURITE PROGRAMMES
If there is a programme setting which you use frequently, the
appliance offers the possibility to save one setting for each
programme so that it can be used again by just pushing one button.
• Select the desired programme, temperature, spin speed and
option(s), push and hold the “Favourites” button for at least
3 seconds. The lamp next to “Favourites” shortly flashes
and then lights up - the programme settings is saved.
Next time you want to use your individual programme settings,
select the programme, push the “Favourites” button and start
by pushing “Start”.
If you want to replace the saved programme setting by
another one:
• Select programme temperature, spin speed and options as
desired and then press and hold the “Favourites” button for
at least 3 seconds.The previously saved programme setting
will be replaced by the new one.
FINISH ON TIME
With this function you can postpone your programme to
complete at a later time: press the button to select in how many
hours the programme shall be finished. Thus, it allows you to
have your laundry ready at a particular time and to profit from
more favourable energy rates during the night, for example.
• Do not use liquid detergent when activating this function.
• The time until the cycle end can be selected in full hour time
segments (1 to 24 h). When you press the button, the shortest
possible time will be displayed; keep on pressing the button to
loop through all the available times. To remove it again, keep
on pressing the button until you see the value “0:00”.
• When you have selected the desired time until the cycle end,
press “Start” - the countdown will begin.
• During the countdown, you can still modify the programme
setting (select or deselect options, change spin speed etc.).
If the modifications prolong the programme duration so that
it overruns the originally set time until the cycle end, the
programme will start immediately.
• Sometimes the programme may finish before the selected
time until the cycle end has expired (e.g. for small loads).
In this case, the washing machine will tumble the laundry
regularly to keep it fresh, until the selected cycle end time
has expired. During tumbling, the display will show an
animation. The tumbling phase can be stopped at any time
either by pressing any button or by rotating the programme
selector; the animation will stop and the door will unlock in
about 1 minute as indicated on the display.
ECO MONITOR
The “Eco monitor” gives you a rough feedback about the power
consumption of the programme setting you selected. As soon as
you turn the programme selector to any programme, the “Eco
monitor” is on.
The indicator on the left is to show that the “Eco monitor
is active. The four indicators next to it show the degree of
consumption: the less power your programme setting is
forecasted to consume, the less indicators will light up. This
depends on the programme, temperature and options selected,
and also on the size of the wash load. For that reason, the
forecasted degree of power consumption may adapt when the
washing machine detects the wash load.
PROGRAMME START
Open the tap and press the “Start” button. The indication
lamp next to the “Start” button lights up. The display shows
the remaining programme time. Due to variations in load
1.
ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME
Add detergent as indicated an the front page and as described
in the chapter “Detergent and Additives” in your Instructions
for Use.
2. Turn the programme selector to the desired programme.
3. The temperature and spin speed indicated on the display can be
altered by pressing the “Temperature” button or the “Spin
button. The light next to the “Start” button blinks. If you
do not start the programme soon after having made your
choice, the washing machine will switch off automatically
after about a quarter of an hour. Switch on the washing
machine again by turning the programme selector back to
Off/O“ and then to the desired programme.
SELECT ANY DESIRED OPTION
When the combination of programme and additional option(s)
is not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt).
Increases the cycle time by approximately 15 min.
• Do not use liquid detergent for the main wash when activating
the Prewash option.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft
water, washing baby linen and helping people with allergies.
“Soil level” button
• Adapts the programme duration to the soil level of your
laundry. Also influences the detergent quantity.
= lightly soiled - = normaly soiled - = heavily soiled
Not all soil levels are selectable for each programme.
and temperature of inlet water, the remaining time is newly
calculated in certain programme phases. If this is the case, an
animation appears on the time display.
“LID OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to
show the the lid can be opened. As long as a wash programme is
running, the lid remains locked and must on no account be forced
open. In case you have an urgent need to open it during a running
programme, refer to “Cancel a running programme before the end”.
CHILD LOCK BUTTONS
You can lock the buttons of the control panel against improper
use (e.g. by children).
• Press both of the child lock buttons simultaneously and hold
them for at least 3 seconds. The key symbol on the display
lights up.
• To unlock the buttons again: proceed in the same way.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
Water tap closed” -
No or not sufficient inlet water.
“Service” -
Failure or malfunction of an electrical component.
“Clean pump” -
Waste water is not pumped out.
Spin speed on display blinks: unbalance during spinning
•
PROGRAMME END
The “Lid open” indication lights up and the display shows
“End”. After about a quarter of an hour, the washing machine
will switch off completely to save energy.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open lid and drum and unload the machine.
4. Leave the lid open for some time to allow the interior of the
machine to dry.
DETERGENT OVERDOSAGE INDICATION
The symbol will light up at the end of the programme if you
used too much detergent. use less detergent next time. If the
symbol lights up and the display shows “Fod”, too much foam
interrupted the wash process; refer to the “Troubleshooting
Guide” in your Instructions for use.
1.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
Press the “Start” button to pause the programme. The light
blinks.
2. Select the new programme, temperature, any options and
another spin speed if you want.
3. Press the “Start” button again. The new programme
continues at the same position where the previous programme
was interrupted. Do not add detergent for this programme.
CANCEL A RUNNING PROGRAMME BEFORE
THE END
The “Reset/Drain button cancels a programme before the end.
• Press the “Reset/Drain” button for at least 3 seconds. The
water is drained out; it may last a while until you can open the lid.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bauknecht WAT 4560 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bauknecht WAT 4560

Bauknecht WAT 4560 Bedienungsanleitung - Deutsch - 18 seiten

Bauknecht WAT 4560 Bedienungsanleitung - Deutsch - 2 seiten

Bauknecht WAT 4560 Bedienungsanleitung - Englisch - 19 seiten

Bauknecht WAT 4560 Bedienungsanleitung - Holländisch - 18 seiten

Bauknecht WAT 4560 Bedienungsanleitung - Holländisch - 2 seiten

Bauknecht WAT 4560 Bedienungsanleitung - Französisch - 18 seiten

Bauknecht WAT 4560 Bedienungsanleitung - Französisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info