Bedienungsanleitung BeamZ 152.752 Apollo (Seite 3 von 22) (Deutsch, Englisch, Holländisch, Französisch)

765598

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

—3—

LASER SAFETY AND OPERATING INSTRUCTIONS

STOP AND READ ALL LASER SAFETY DATA

Laser Light is different from any other light source with which you may be familiar. The light from this product can potentially

cause eye injury if not set up and used properly. Laser light is thousands of times more concentrated than light from any other

kind of light source. This concentration of light power can cause instant eye injuries, primarily by burning the retina (the light

sensitive portion at the back of the eye). Even if you cannot feel “heat” from a laser beam, it can still potentially injure or blind

you or your audience. Even very small amounts of laser light are potentially hazardous even at long distances. Laser eye

injuries can happen quicker than you can blink. It is incorrect to think that because these laser entertainment products split

the laser into hundreds of beams or laser beam is scanned out in high speed, that an individual laser beam is safe for eye

exposure. This laser product uses dozens of mini Watts of laser power (Class 3B levels internally). Many of the individual

beams are potentially hazardous to the eyes. It is also incorrect to assume that because the laser light is moving, it is safe.

This is not true. Nor, do the laser beams always move. Since eye injuries can occur instantly, it is critical to prevent the

possibility of any direct eye exposure. In the laser safety regulation, it is not legal to aim Class 3B lasers in areas which

people can get exposed. This is true even if it is aimed below people’s faces, such as on a dance floor.

 Do not operate laser without first reading and

understanding all safety and technical data in this

manual

 Always set up and install all laser effects so that all

laser light is at least 3 meters (9.8 feet) above the

floor on which people can stand. See “Proper Laser

Set-up & Usage” section later in this manual

 After set up, and prior to public use test laser to ensure

proper function. Do not use if any defect is detected. Do

not use if laser emits only one or two laser beams rather

than dozens/hundreds, as this could indicate damage

to the diffraction grating optic, and could allow emission

of higher laser levels.

 Do not point lasers at people or animals

 Never look into the laser aperture or laser beams

 Do not point lasers in areas in which people can

potentially get exposed, such as uncontrolled balconies,

etc.

 Do not point lasers at highly reflective surfaces such as

windows, mirrors and shiny metal. Even laser

reflections can be hazardous.

 Never point a laser at aircraft, this is a federal offense

 Never point un-terminated laser beams into the sky

 Do not expose the output optic (aperture) to cleaning

chemicals

 Do not use laser if the laser appears to be emitting only

one or two beams

 Do not use laser if housing is damaged or open, or if

optics appear damaged in any way.

 Never open the laser housing. The high laser power

levels inside of the protective housing can start fires,

burn skin and will cause instant eye injury.

 Never leave this device running unattended.

 The operation of a class 3B laser show laser is only

allowed if the show is controlled by a skilled and

well-trained operator familiar with the data included in

this manual.

 The legal requirements for using laser entertainment

products vary from country to country. The user is

responsible for the legal requirements at the

location/country of use.

 Always use appropriate lighting safety cables when

hanging lights and effects overhead

 Power off before installation or maintenance

 The danger class of this laser lighting is CLASS IIIB.

 It’s dangerous for observing laser. The safe minimum

distance is 13cm,the safe maximum time is 10 seconds

 Keep at least 0.5 meters distance between the lighting

and flammable material

LASER SAFETY LABEL REPRODUCTIONS

Caution – Class 3B LASER RADIATION, WHEN OPEN, AVOID EXPOSURE TO BEAM

LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT.

The label indicates the laser beam output aperture.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BeamZ 152.752 Apollo Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info