Bedienungsanleitung BEKO WMB 71422 (Seite 64 von 68) (Deutsch, Englisch, Holländisch, Französisch)

475970

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ProgrammeSelectionknobtoanyprogramme.

Thus,DelayedStartfunctionwillbecanceled.The

End/Cancellightflashescontinuously.Then,select

theprogrammeyouwanttorunagain.PressStart

/Pausebuttontostarttheprogramme.

Starting the programme

PressStart/Pausebuttontostarttheprogramme.

Programmefollow-uplightshowingthestartupof

theprogrammewillturnon.

 Ifnoprogrammeisstartedornokeyis

pressedwithin1minuteduringprogramme

selectionprocess,themachinewillswitch

toPausemodeandtheilluminationlevelof

the temperature, speed and loading door

indicatorlightswilldecrease.Otherindicator

lightsandindicatorswillturnoff.Oncethe

ProgrammeSelectionknobisrotatedor

any button is pressed, indicator lights and

indicatorswillturnonagain.

Child Lock

Usechildlockfunctiontopreventchildrenfrom

tamperingwiththemachine.Thusyoucanavoid

any changes in a running programme.

 IftheProgrammeSelectionknobisrotated

whenthechildlockisactive,thelightsonthe

and 2

auxiliaryfunctionbuttonswillblink

3times.Thechildlockdoesnotallowany

change in the programmes and the selected

temperature,speedandauxiliaryfunctions.

 Evenifanotherprogrammeisselectedwith

theProgrammeSelectionknobwhiletheChild

Lockisactive,previouslyselectedprogramme

willcontinuerunning.

 WhentheChildLockisactiveandthe

machineisrunning,youcanswitchthe

machinetoPausemodewithoutdeactivating

theChildLockbyturningtheProgramme

SelectionknobtoOn/Offposition.When

youturntheProgrammeSelectionknob

afterwards,theprogrammewillresume.

ToactivatetheChildLock:

Pressandhold1

and 2

Auxiliary Function

buttonsfor3seconds.Thelightsonthe1

and 2

AuxiliaryFunctionbuttonswillflashwhileyoukeep

thebuttonspressedfor3seconds.

TodeactivatetheChildLock:

Pressandhold1

and 2

auxiliaryfunction

buttonsfor3secondswhileanyprogrammeis

running.Thelightsonthe1

and 2

Auxiliary

Functionbuttonswillflashwhileyoukeepthe

buttonspressedfor3seconds.

 Inadditiontothemethodabove,todeactivate

theChildLock,switchtheProgramme

SelectionknobtoOn/Offpositionwhenno

programme is running, and select another

programme.

 Whenthepowerisrestoredafterapower

failureorafteryourmachineisunplugged

andpluggedinagain,theChildLockwillnot

bedeactivatedwhenthemachineresumes

operating.

Progress of programme

Progressofarunningprogrammecanbefollowed

fromtheProgrammeFollow-upindicator.At

thebeginningofeveryprogrammestep,the

relevantindicatorlightwillturnonandlightofthe

completedstepwillturnoff.

Youcanchangetheauxiliaryfunctions,speed

andtemperaturesettingswithoutstoppingthe

programmeflowwhiletheprogrammeisrunning.

Todothis,thechangeyouaregoingtomakemust

beinastepaftertherunningprogrammestep.If

thechangeisnotcompatible,relevantlightswill

flashfor3times.

 Ifthemachinedoesnotpasstothespinning

step,RinseHoldfunctionmightbeactive

or the automatic unbalanced load detection

system might be activated due to the

unbalanceddistributionofthelaundryinthe

machine.

Loading door lock

Thereisalockingsystemontheloadingdoorof

themachinethatpreventsopeningofthedoorin

caseswhenthewaterlevelisunsuitable.

Loadingdoorlightwillstartflashingwhenthe

machineisswitchedtoPausemode.Machine

checksthelevelofthewaterinside.Ifthelevelis

suitable,LoadingDoorlightilluminatessteadily

within1-2minutesandtheloadingdoorcanbe

opened.

Ifthelevelisunsuitable,LoadingDoorlightturns

offandtheloadingdoorcannotbeopened.If

youareobligedtoopentheLoadingDoorwhile

theLoadingDoorlightisoff,youhavetocancel

the current programme; see "Canceling the

programme".

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pausebuttontoswitchthe

machinetopausemodewhileaprogrammeis

running.Thelightofthestepwhichthemachine

isinstartsflashingintheProgrammeFollow-up

indicatortoshowthatthemachinehasbeen

switchedtothepausemode.

Also,whentheloadingdoorisreadytobeopened,

LoadingDoorlightwillalsoilluminatecontinuously

in addition to the programme step light.

Changing the speed and temperature settings

for auxiliary functions

Dependingonthesteptheprogrammehas

reached, you may cancel or activate the auxiliary

functions;see,"Auxiliaryfunctionselection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

 Ifnochangeisallowed,therelevantlightwill

flashfor3times.

BEKO WMB 71422 Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info