772308
4
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
STEP 3 STEP 5
Remove the seat post clamp bolt from your bicycle.
Attach the U-bracket using a 8mm x 58mm Hex Bolt,
8mm Split Lock Washer and 8mm Nylock Nut.
STEP 4
Position right and left seat supports on both sides of U
bracket. Insert spacer tube and secure using a 8mm x
58mm Hex Bolt. 8mm Split Lock Washer and 8mm
Nylock Nut. Hand tighten at this time.
Assemble long lower brackets to rear stay of bicycle by
sliding vinyl paint protectors over all four brackets and
inserting the short lower bracket into the slotted end of
the long lower bracket and twisting into position. Insert
8mm x 30mm Round Hd. Sq. Neck Bolt and secure
with 8mm Split Lock Washer and 8mm Nylock Nut.
STEP 6
Remove Foot Guard, Spring Guards and Foot Guard
Fasteners from plastic sheet. Install foot guard by
wrapping it over the top of the right and left seat
supports and tucking it under the front edge of the
seat. Secure foot guard to bicycle frame by inserting
fasteners through slots in foot guard and around the
bicycle frame. If bicycle has exposed springs, wrap
spring guards around springs.
NOTE: The child carrier must be in a level position
when installed. Several adjustment holes are provided
in the U bracket which will enable you to clear all
obstructions and level the carrier. Tighten all fasteners
securely. Place plastic thread protector (item #15) onto
8mm x 58mm Hex Bolt used in Steps 3 & 4.
HARDWARE NEEDED FOR
STEP 3, 4 & 5
ITEM #20
8mm x 58mm
Hex Bolt
Steps 3 & 4
ITEM #21
8mm
Nylock Nut
Steps 3, 4 & 5
ITEM #15
Plastic Thread
Protector
Steps 3 & 4
ITEM #22
8mm
Split Lock Washer
Steps 3, 4 & 5
ITEM #19
8mm x 30mm Round
Hd. Sq. Neck Bolt
Step 5 Only
15
11
15
11
14
3
2
12
13
23
Spring Guards
Foot Guard
Plastic Sheet
Foot Guard
Fasteners
Spring Guard
Fasteners
5
Spring Guard
6
Foot Guard
Fastener
4
Foot Guard
6
Foot Guard
Fastener
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bell Cocoon 300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info