Bedienungsanleitung Bellman BE1210 (Seite 12 von 13) (Englisch)

747165

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Service and support

If the product appears to be damaged or doesn’t function properly, follow the instructions in

this user guide. If the product still doesn’t function as intended, contact your local dealer for

information on service and warranty.

Warranty conditions

Bellman & Symfon guarantees this product (excluding batteries) for 2 years from date of purchase

against any defects that are due to faulty materials or workmanship. This guarantee only applies

to normal conditions of use and service, and does not include damage resulting from accident,

neglect, misuse, unauthorized dismantling, or contamination howsoever caused. This guarantee

excludes incidental and consequential damage. Further the warranty does not cover Acts of God,

such as re, ood, hurricanes and tornadoes. Bellman & Symfon shall not be liable for any inci-

dental or consequential damages caused by the breach of any express or implied warranty. Any

implied warranty of merchantability or tness for purposes is limited to the duration of the above

warranty period. This warranty gives you specic legal rights and you may also have other rights

that vary from state to state. Some states or jurisdictions do not allow the limitation or exclusion

of incidental or consequential damages, or limitations on how long an implied warranty last so

the above limitation may not apply to you. Do not interfere with the alarm or attempt to tamper

with it. This will invalidate the guarantee, but more importantly may expose the user to shock or

re hazards. This guarantee is in addition to your statutory rights as a consumer.

Model, type and classication

The information is available at the back of the CO alarm.

Product disposal and recycling information

The symbol to the left means that according to local laws and regulations your product

should be disposed of separately from household waste. When this product reaches its

end of life, take it to a collection point designated by local authorities.

21 22

FCC compliance statement

This device complies with Part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) this device

may not cause harmful interference, and

(2) this device must accept any interfer-

ence received, including interference

that may cause undesired operation.

FCC ID: 2APAKBE1210

Warning: Changes or modications not

expressly approved by the party respon-

sible for compliance could void the user's

authority to operate the equipment.

Note: This equipment has been tested

and found to comply with the limits

for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are

designed to provide reasonable protec-

tion against harmful interference in a

residential installation. This equipment

generates uses and can radiate radio

frequency energy and, if not installed

and used in accordance with the instruc-

tions, may cause harmful interference

to radio communications. However,

there is no guarantee that interference

will not occur in a particular installation.

If this equipment does cause harmful

European oce

Bellman & Symfon Group AB

Södra Långebergsgatan 30

436 32 Askim

Sweden

Phone: +46 31 68 28 20

E-mail: info@bellman.com

interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Industry Canada statement

This device contains licence-exempt transmitter(s)/receiver(s) that

comply with Innovation, Science and Economic Development Canada’s

licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may

cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent

appareil est conforme aux CNR d'Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes:

(1) L'appareil ne doit pas produire de brouillage;

(2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

This Class B digital apparatus complies with the Canadian RSS-210.

IC: 6693A-BE1210

Conforms to UL Std.2034. Certied to CSA Std. 6.19:2017

For a complete Declaration of Conformity please contact the

Bellman & Symfon European oce.

Service center

Bellman & Symfon North America Inc.

5509 Business Dr., Unit B

Wilmington, NC 28405

USA

Toll Free: (833) 235-5626

Email: support.bsn@bellman.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bellman BE1210 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info