Bedienungsanleitung Bellman Symfon BE2021 Maxi Pro (Seite 4 von 5) (Englisch)

747143

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Troubleshooting

Most problems with Maxi Po can be solved quickly by following the advice below.

If Try this

I can’t get the units to pair via Bluetooth. • Make sure that your Maxi is in microphone mode by

pressing the microphone selector (4). Try pairing the

units again by following the steps in the section Pairing.

Nothing happens when I press the Maxi On/O button. • The batteries are depleted. Charge Maxi, see Charge Maxi.

The Maxi battery indicator is blinking in red. • The battery level is low. Charge Maxi, see Charge Maxi.

I hear no sound in my headphones, even though Maxi is

turned on.

• First, make sure the volume is at the required level.

Then, check that the headphone plug is properly con-

nected to the Maxi headphone jack (12).

• Increase the volume by pressing the on the Maxi

volume controls (6).

• Connect the headphones to another device, like a

smart phone, and check if you hear any sound. If not,

the headphones may need to be replaced.

• If Bluetooth mode is selected, make sure that the TV

streamer or mobile phone is within range, paired and

streaming a sound.

I don’t hear the mobile phone in my headphones. • Make sure Bluetooth is activated on your mobile

phone and that it is paired with your Maxi, see Pairing

in the Using Maxi with your mobile phone section.

I don’t hear the sound of the TV in my headphones. • Make sure the TV streamer is within range and paired

with your Maxi, see Pairing in the Using Maxi for

TV-listening section.

The sound from the TV or mobile is too low, even though

the Maxi volume is at the highest level.

• Try to increase the volume on your TV or mobile phone

instead.

I hear a high-pitched noise in my headphones. • Lower the volume or increase the distance between

Maxi and the headphones.

• Direct the Maxi microphone (9) away from you.

Maxi seems unresponsive/frozen. • Press and hold the On/O button (3) for ten seconds

until Maxi turns o.

• Press the On/O button for about one second to start

Maxi again.

Care and maintenance

Using the product

Note: Maxi Pro can produce high sound levels. Please

use with care. Increase the volume level gradually to a

comfortable level. Exposure to high sound levels can

damage your hearing.

Ensure that small parts are kept out of reach from children.

Operate the product in a dry environment where the

temperature is always between 0° and 35° C.

Cleaning

Clean the product with a soft, lint-free cloth. Avoid get-

ting moisture in openings.

Service and warranty

If the product appears to be damaged or doesn’t func-

tion properly, follow the instructions in this leaet. If the

product still doesn’t function as intended, contact your

local dealer for information on service and warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bellman Symfon BE2021 Maxi Pro Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bellman Symfon BE2021 Maxi Pro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info