636250
62
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
BenQ DC 5530 Users Manual
Troubleshooting58
English
e
of Contents
10 TROUBLESHOOTING
Symptoms Causes Solutions
The power won’t turn
on.
The battery is out of power.
The AC power adapter is not con-
nected or is damaged.
The USB cable is not properly con-
nected to the camera or PC.
Use the AC power adapter to charge
the battery.
Make sure the AC power is con-
nected and it's not damaged.
First turn on the PC, then connect
the camera and PC with the USB
cable.
The power turns off
during use.
The battery is out of power.
Power Saving mode is enabled.
The battery/SD card cover is opened
when in use.
The adapter has not been connected
properly.
Use the AC power adapter to charge
the battery.
Switch on the power.
Do not open the battery/SD card
cover when the camera is in use.
Connect the adapter correctly.
The battery power is
being used up too
quickly.
The external temperature is too
cold.
The battery is not used for a long
time.
Keep the camera away from extreme
temperatures.
Recharge the battery with the AC
power adapter or USB cable.
The camera does not
take pictures when the
shutter button is
pressed.
The camera is not in Snapshot
Mode.
The battery is weak.
The power has not been switched
on.
Set the Mode switch to Snapshot
mode.
Replace the battery.
Switch on the power.
The close-up image is
blurred.
Select the correct focus range. If the subject is within 30 to 100 cm
(12 to 40 inches), select Macro
mode.
The flash does not fire. The camera flash is turned off.
The light source is sufficient.
The flash is not fully charged.
Set the flash mode to Auto Flash,
Forced Flash, or Red-Eye Reduction
mode.
Wait for the flash to fully charge.
There is something
wrong with the color
of the captured image.
White balance is not set properly. Set the white balance to Auto mode
or other suitable mode.
The picture is too
bright or too dark.
There is excessive or inadequate
exposure.
Reset EV bias value.
The LCD screen is not
clear.
The LCD screen plastic cover is
dirty.
The LCD screen has hot spots.
Clean the LCD screen with a soft
cloth.
Hot spots are normal and do not
affect the camera’s functionality.
The camera cannot
download images to
the PC.
The cable is not connected properly.
The camera is off.
OS is not Windows 98SE
/2000/ME/XP or the PC is not
equipped with a USB port.
USB driver is not installed (Win-
dows 98SE only).
Check the cable connection.
Turn on the power.
Install Windows 98SE/2000/ME/XP
and USB port.
Install the USB Driver (Windows
98SE only).
62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ DC E41 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BenQ DC E41

BenQ DC E41 Bedienungsanleitung - Deutsch - 63 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info